Finally found the solution, which leaves me with a question.
Having successfully installed an 11.10 server with RAID, I tried again
on 11.10 desktop: this time, after getting the message that GRUB had not
installed, I chrooted into /target/, did 'sudo-apt-get install mdadm',
then 'sudo
Can you boot from CD, chroot into your system, install mdadm, then try
update-grub grub-install /dev/sda ?
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/883720
Title:
oneiric fresh install to
Does this still happen with the final 11.10 release? Do you have an EFI
system partition? I assume you are using 64-bit, booted into UEFI mode?
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/839606
Nevermind, my bug seems to be in Ubiquity.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/681535
Title:
Auto-detection of a filesystem of /dev/md0 failed.
To manage notifications about this bug go
** Summary changed:
- Ubiquity fails with EFI and software RAID
+ ubiquity and grub-install: fails to install grub on software RAID
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/880766
Title:
Updating bug description - I'm having the same problem in a VirtualBox
environment (disks partitioned as GPT, no EFI).
I was able to use ubuntu-11.10-server-amd64 to install a system with
mdadm RAID1 (GPT partitioning, 1MB BIOS GRUB partition, ~20GB RAID)
and have the system boot successfully,
Can you provide your partition table info, e.g. the output of 'fdisk
-l'?
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/883109
Title:
Grub2: grub-probe: warn: Discarding improperly nested partition
Just installed 11.10 server 64-bit in VirtualBox with a simple raid1;
grub installed with no errors.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/825145
Title:
GRUB and software raid issue
To
Can you provide some more info - which release, what is your partition
layout etc.?
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/839606
Title:
The 'grub-efi' package failed to install into
I'm having similar problems (installing grub under amd64 with mdadm
raid1). Two questions - are you using GPT or MBR for your partition
tables, and is this system using BIOS or EFI?
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
** Also affects: grub2 (Ubuntu)
Importance: Undecided
Status: New
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/880766
Title:
Ubiquity fails with EFI and software RAID
To manage
Most of the Intel Sandy Bridge platforms use EFI; generally they will
start in BIOS emulation mode unless told otherwise. If you think your
platform might support EFI, try manually selecting the boot device once
the CD is inserted; there should be a (uefi) optical drive option or
similar if your
If you are booting in EFI mode, grub is not installed in the MBR but in
the EFI system partition, and registered into the EFI boot order with
efibootmgr - I've mainly be trying to get this working with 11.10
Desktop using the graphical installed (Ubiquity). A simple partition
setup seems to work
Attached is the log of grub-probe from grub_1.99-12ubuntu5.
** Attachment added: grub_1.99-12ubuntu5.txt
https://bugs.launchpad.net/grub/+bug/880766/+attachment/2577347/+files/grub_1.99-12ubuntu5.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is
Attached is the output of grub-probe built from revision 3473 of
lp:grub.
** Attachment added: grub_bzr.txt
https://bugs.launchpad.net/grub/+bug/880766/+attachment/2577348/+files/grub_bzr.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed
Which install method are you using (desktop/server/alternate CD,
netboot, USB) and which architecture? Did you boot into UEFI mode to
install?
I'm not sure that the process is not adequately documented is grub's
fault - see https://help.ubuntu.com/community/UEFIBooting for a great
deal of info on
Is this bug still present in any supported release (10.04 onwards)?
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/493268
Title:
GRUB2 boots from raid1 device only after grub rescue insmod linux +
** Changed in: grub2 (Ubuntu)
Status: New = Invalid
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/420915
Title:
ubuntu karmic alpha 4 wireless keyboard not recognised on grub menu
and PC
Under 10.10 I get two menu entries for Mac OS X:
menuentry Mac OS X (32-bit) (on /dev/sda2)
and
menuentry Mac OS X (64-bit) (on /dev/sda2)
Are the people having this bug on currently supported releases (10.04
onwards) using Apple hardware or otherwise? Personally I'm not even
using the Ubuntu
Is this bug still present in any supported release?
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/430659
Title:
grub2 cannot find kernel in dual kubuntu/xubuntu 9.10 boot scenario
To manage
Does this bug still affect any supported release?
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/428519
Title:
Unable to enable framebuffer modes with grub 2
To manage notifications about this bug
Is this still a problem in a supported release (10.04 onwards)?
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/406142
Title:
Grub2 menu doesn't list entries with foreign characters
To manage
I tried chrooting into the system and running grub-install then grub-
probe from there; the final lines were
/usr/sbin/grub-probe: info: opening md0,1.
/usr/sbin/grub-probe: error: no such disk.
Then I build grub from source (bzr revision 3473 from lp:grub) and ran
grub-probe, this time getting
Is this bug still present in 10.04 LTS?
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/561270
Title:
grub2 software raid1
To manage notifications about this bug go to:
Sorry, just looked through the logs that I kept and realised I didn't
run grub-mkdevicemap before grub-probe; I'll try again tonight and post
back on this.
Does grub-installer run this check (grub-mkdevicemap) before attempting
grub-install?
--
You received this bug notification because you are
Was this system installed when booted in BIOS or EFI mode?
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/825145
Title:
GRUB and software raid issue
To manage notifications about this bug go to:
Is this still affecting 10.04? I managed to fix my 8.04 system with a
reboot.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/371338
Title:
cannot stop RAID1
To manage notifications about this bug
Is this actually a bug with grub, a bug with mdadm or an intended
design?
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/497039
Title:
Fails to install on fully degraded RAID10
To manage
I have a MacBook 5,2 and have been booting in EFI mode with rEFIt, a
manually compiled grub.efi and the following grub.cfg:
set debug=video
set timeout=10
insmod efi_gop
menuentry Linux (no agp, force acpi) {
root=(hd0,3)
fakebios
linux /vmlinuz root=/dev/sda3 video=efifb agp=off
Ubuntu 9.10 is EOL as of 2011-04-30.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/430211
Title:
package grub-pc 1.97~beta3-1ubuntu1 failed to install/upgrade:
подпроцесс установлен сценарий
** Changed in: grub2 (Ubuntu)
Status: New = Incomplete
** Changed in: grub2 (Ubuntu)
Status: Incomplete = Fix Released
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/468856
Title:
What does the output of `lsusb -v` describe the mouse as? If it's a
keyboard, it may be sending keystrokes when powered on.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/807747
Title:
grub2 shows
Is this still present with 1.99-12ubuntu5?
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/784981
Title:
[Oneiric] gfxpayload=keep does not work on new grub2 1.99
To manage notifications about this
Still broken in 11.10, this time with GPT and an EFI system (Intel Sandy
Bridge).
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/681535
Title:
Auto-detection of a filesystem of /dev/md0 failed.
To
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/880766
Title:
Ubiquity fails with EFI and software RAID
To manage notifications about this bug go to:
Public bug reported:
Installing from a Mythbuntu amd64 CD booted in UEFI mode. Manually
created partitions using gdisk, created RAID1 using mdadm. Ran Ubiquity
installer to create /dev/md0p1 as ext4, install proceeded until aborting
at the end saying that grub-efi could not be installed.
Manual
** Changed in: gparted (Ubuntu)
Status: New = Invalid
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/658374
Title:
Please update GParted to to version 0.6.4
--
ubuntu-bugs mailing list
This has resolved itself on the server I had a problem with - after
commenting out the array definition from mdadm.conf, rebooting, and
zeroing the superblock.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
I've got Ubuntu 10.10 (2.6.35-23-generic #41-Ubuntu SMP) booting using
my old grub 1.97 (that was booting Ubuntu 9.04) compiled as so:
./configure --with-platform=efi --target=x86_64
make
./grub-mkimage -d . -o grub.efi acpi boot chain configfile ext2 fat hfsplus
normal part_gpt sh
Then my
** Summary changed:
- Please update GParted to to version 0.6.3
+ Please update GParted to to version 0.6.4
** Description changed:
Binary package hint: gparted
- GParted 0.6.3 was released on September 23, 2010. Can it please be
- updated for 10.10 updates / 11.04?
+ GParted 0.6.3 was
I'm not entirely sure how the package update/upgrade process works in
Ubuntu; I've changed the bug title description to 0.6.4 (10.10 was
released with 0.6.2). Will the package version be upgraded in 10.10
updates or merely have specific patches generated applied?
--
Please update GParted to to
Public bug reported:
Binary package hint: gparted
GParted 0.6.3 was released on September 23, 2010. Can it please be
updated for 10.10 updates / 11.04?
** Affects: gparted (Ubuntu)
Importance: Undecided
Status: New
--
Please update GParted to to version 0.6.3
Public bug reported:
Binary package hint: phpldapadmin
Distrubution: Ubuntu 8.04.4 LTS
Package version: phpldapadmin 1.1.0.4-2ubuntu1
Expected behaviour:
The modify group members form (modify_member_form.php) should be a
well-formed XHTML document with a single head section, which properly
Public bug reported:
Binary package hint: apcupsd
In apcupsd, Ubuntu 8.04.4, apcupsd-3.14.2:
The PID used by apcupsd is hardcoded in src/lib/apcfile.c and
include/defines.h to apcupsd.pid.
This breaks the expectation that start-stop-daemon can specify its own
PID file, and hence allow multiple
This probably relates to the group that owns /dev/tty0 and /dev/console
- I noticed that some of the servers I administer would exhibit this
behaviour and others wouldn't. On my 9.04 desktop they're owned by root,
but on an 8.04 server they're owned by dialout, and I was a member of
the dialout
Using NVIDIA drivers 185 and fakebios option in grub.cfg - I now have
ACPI (2 cores, battery status) and 3D effects! applesmc is not working,
mouse key emulation has disappeared (not a bad thing, I have my F11/F12
keys back!) - thank you everyone! I'll double-check my grub.cfg and then
post that
I've tried the following:
- Compile grub2 (in Ubuntu 9.04) using x86_64 with modules: acpi, boot, chain,
configfile, ext2, fat, hfsplus, normal, part_gpt, sh
- Using kernel 2.6.28-16-generic
- Using NVIDIA drivers 173
- Using the posted grub.cfg updated to the above kernel version
rEFIt loads
I've got a similar problem trying to break down a RAID1 array to use the
individual partitions for swap. From what I understand the array was
created during installation and marked as swap, then had a single
partition removed from it (currently activated as swap).
$ uname -a
Linux adlai
Can this please be updated / upgraded / backported / whatever in Jaunty?
--
New stable release - 185.18.36 - should replace 185.18.31 ASAP
https://bugs.launchpad.net/bugs/408561
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
49 matches
Mail list logo
