That's awesome, thanks for figuring out how to make it work cleanly for
everyone.
There is a problem with the testing request, though.
It's highly likely, that subscribers of this thread want to keep avahi far away
from their systems
Therefore they probably won't have the cups+avahi setup
** Attachment added: GPEs in dmesg
https://bugs.launchpad.net/ubuntu/+source/dosbox/+bug/1272705/+attachment/3956823/+files/dmesgGPE
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1272705
Title:
Public bug reported:
x64
13.10 Saucy
Program run: Prague metro C simulator (freeware) based on famous
EN57/Mechanik (freeware)
The console just said Segmentation Fault as usual for a GPE
Will attach: Dmesg messages, valgrind log, gdb stacktrace
Steps how to reproduce:
Get it here:
Unfortunately I have no idea which debug symbols are missing for
revealing the locations
** Attachment added: valgrind memcheck output log
https://bugs.launchpad.net/ubuntu/+source/dosbox/+bug/1272705/+attachment/3956824/+files/valgrind.log
--
You received this bug notification because
Dmesg messages from three separate crashes:
[135763.030627] traps: dosbox[28100] general protection ip:7f644856bd51
sp:7fff933b5388 error:0 in libm-2.17.so[7f644854d000+103000]
[138386.181913] traps: dosbox[28291] general protection ip:7f602500bd51
sp:7fff2edf2388 error:0 in
I played 81MSLABY once without success
Then I played 81MSTREDNI almost to the end where I got a crash at the final
junction
It appears to be exactly the same issue as the valgrind trace or dmesg..
... interesting.. this time there was to traps: message in dmesg
** Attachment added: thread
Got another crash at the beginning of the first junction block this time
at 81MSILNY. It's the same of course.
Basically.. it seems that the crash points are the spots where the rails
split/merge
(Either it crashes at the very beginning of an junction block or at it's very
end)
--
You
** Attachment added: Crash at the start of 81MSILNY (thread apply all bt full)
https://bugs.launchpad.net/ubuntu/+source/dosbox/+bug/1272705/+attachment/3956851/+files/gdb-backtrace-81MSILNY
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to
It's not really my fault that a new kernel was published since my last
post... but OK, I can test again.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1268340
Title:
[regression]ACPI tables
The WARNING is still there, the symptoms are still there.
@ apport-collect
Is there a way how that can be done WHILE keeping my launchpad login away from
the machine?
(Hey, I downloaded a kernel over plain HTTP and ran it few hours after you
asked me to. No way I'll give it my login details)
so?
It'll still be a machine I downloaded a kernel via plain HTTP on and ran it.
A reboot won't make it any more trustworthy, why should it?
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1268340
Did I miss any piece of missing information?
** Changed in: linux (Ubuntu)
Status: Incomplete = Confirmed
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1268340
Title:
[regression]ACPI
I, of course, know that HAL has been obsolete for like an eternity now
(and removing it of course removes the messages and halves the boot time)
However, it is still installable in the previous LTS version (and saucy is
actually the only release where it's not available)
Anyone skipping non-LTS
@ Upstream testing - OK, I'll do that
@ Rest of the required steps - what? The system is already running
Trusty Tahr -dev
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1268340
Title:
It's pretty much the same on mainline 3.13-rc2 (That is the closest
kernel to one I'm running in Trusty right now I guess)
** Attachment added: Dmesg after boot of 3.13-rc2, mainline
Same on -rc8, the issue exists there too.
The raw hex values taken from (presumed) ACPI tables have changed quite
considerably, though.
** Attachment added: Dmesg after boot of 3.13-rc8, mainline
** Attachment added: dmesg after boot
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1268340/+attachment/3946958/+files/dmesg
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1268340
Title:
uname -a: 3.13.0-2-generic #17-Ubuntu SMP Fri Jan 10 12:14:58 UTC 2014
i686 i686 i686 GNU/Linux
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1268340
Title:
[regression]ACPI tables parsing issue
Public bug reported:
Occurs on:
13.10 Saucy (linux 3.11)
14.04-dev (linux 3.13)
Does not occur on:
all previous releases since 2008 or so
The machine has 2 PentiumIII processors
It's BIOS dates back to 1999, but till now it worked well with acpi=force
There is a warning in DMESG that
** Attachment added: Output of sudo lspci -vvnn
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1268340/+attachment/3946959/+files/lspci-vvnn
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
I never got suspend/resume running on that machine
/proc/acpi directory is not present
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1268340
Title:
[regression]ACPI tables parsing issue (WARNING
** Attachment added: Output of sudo dmidecode
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1268340/+attachment/3946960/+files/dmidecode
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
Public bug reported:
There is a lot of such messages in the dmesg (and on the screen) after
the boot
** Affects: udev (Ubuntu)
Importance: Undecided
Status: New
** Attachment added: dmesg
https://bugs.launchpad.net/bugs/1268343/+attachment/3946962/+files/dmesg
--
You received
The only activity here is me saying Still an issue in ... for each
release.
And since it's still an issue with Saucy, it means it's still an issue with
kernel 3.11 series.
Can you please rephrase what you want me to test, if anything?
Apport reports cannot be saved locally and uploaded
** Attachment added: $ apport-cli -f -p xserver-xorg-video-ati --save report
https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-video-ati/+bug/1071868/+attachment/3945773/+files/report
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to
I haven't seen this issue for more than a year.
I applied all disable plymouth solutions I found on the web back then,
though.
** Changed in: linux (Ubuntu)
Status: Incomplete = Invalid
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to
Bug reproduction by The parallelogram does not work anymore.
I think I rarely I get to see one/handful-of damaged video line when quickly
and randomly shuffling windows around.
I can't rule out the possibility that the video I played was corrupted, though.
I think it's it's OK to say It fixed
Still an issue in saucy
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1181369
Title:
display: Cropping box does not draw properly with other windows over
it
To manage notifications about this
Wow.. I totally didn't expect this.
It actually IS working again with in the 14.04 Trusty
It seems the reason why it's not crashing anymore is this snippet from the xorg
logfile
MACH64(0): Direct rendering is not supported for ATI chips earlier than the ATI
3D Rage Pro.
MACH64(0): Render
Hard to say.
I would be fine running Trusty there already...
But I discovered an issue with ACPI - ACPI tables won't parse (actually, the
last release that works is 13.03 raring)
- ACPI is not working - no ATX power-off , no display power management (DPMS)
- major usability setback
I guess it
Hi.
rt2860sta? That doesn't seem to be shipped with ubuntu anymore.
(and rt28xxpci/lib worked fine last time I checked)
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/659143
Title:
64bit-only:
I found another nice way how to reproduce (this or a similar issue) with a
shaped window.
program display appears to be creating shaped windows based on the opaque
areas of the image.
fluxbox is (regardless of the chosen style) still drawing a frame around the
hollow window.
display the
EDIT: OOPS, that machine is still running 13.04
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1170117
Title:
[gm45] Xv video corruption when obstructed by shaped windows (corner
case)
To manage
Well..
This is what happens with 13.10's 3.11.0-13 kernel. (reboot after I installed
it)
The screen goes dark (probably not off) for a couple of seconds after hitting
enter in grub.
Then it goes back on, writing startup messages (first one is, strangely,
starting SystemD login service)
I
@gurubert
Upgraded today. now also annoyed by the (wrong) hard-dep on avahi-daemon :(
Having THAT on my system just because I want to be able to print...
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
Public bug reported:
cups-daemon depends on avahi-daemon
This is probably the worst workaround possible for bug 1178172
Which is a combination of two separate issues
o cups requires avahi-daemon to be started before cups
o cups's init script won't attempt to start cups if avahi-daemon is
update: filled a bug against that avahi hard-dep as bug 1242185
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1178172
Title:
cups does not start when avahi-daemon is not installed
To manage
Still an issue in Saucy
** Tags added: saucy
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1071868
Title:
X11 segfaults on WM start, ATI 3|D Rage IIC [regression]
To manage notifications about
So that's why it's not starting.
/etc/init/cups.conf is to blame, as said in #3
start on (filesystem
and started avahi-daemon
and (started dbus or runlevel [2345]))
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to
Public bug reported:
apt 0.9.7.7ubuntu4 (Current version in Raring)
I set apt verbosity to 3 and noticed missing information in the output
/etc/cron.daily/apt
It turned out that the debug lines use variable MinAgeSec, which
doesn't exist.
/etc/cron.daily/apt:199 if [ $delta -le $MinAge ];
There is a point of sudo for GUI apps:
When you are already authenticated for sudo in the console, it's simple to do
say sudo synaptic and it'll work
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
I noticed another separator issue with seq (also coreutils, same
version)
I tried to sort a .csv file containing the following lines by the 2nd column
38,41,10,7
70,37,23,10
using
sort -nr -t, -k2
That happily worked in Quantal, but does only something weird in Raring.
I expect the entire
OOPs..The issue is with sort
** Summary changed:
- seq puts the separator on wrong spot!
+ coreutils: seq puts the separator on wrong spot! ; sort does not sort by the
given field with a non-default separator
--
You received this bug notification because you are a member of Ubuntu
Bugs,
I'd also like to dispute the importance
Silent csv sorting failure almost made me make a wrong decision.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1161073
Title:
coreutils: seq puts the
Update: The sort issue actually exists in Quantal (8.13-3.2ubuntu2) /
Quantal-updates (8.13-3.2ubuntu2.1), while the seq issue does not.
It actually exists even with the coreutils from Precise. I guess that comes
from a library?
I'll report a separate bug when i figure out the details
--
You
I believe that this commit is likely to fix the issue
http://cgit.freedesktop.org/mesa/mesa/commit/?id=ca9a7d975af228cabb79c3040ec67f26f94f90a2
Unfortunately the binary program is 32bit and mesa/libgl is not willing
to cross-compile
The commit made it's way into mesa-9.1.2 (Raring has currently
There was a complete signal outage yesterday + a power outage recently. I
don't know which messages should be atributed to which cause.
Getstream is definitely not immune to complete signal outage, not even with my
hackpatch.
I *guess* that it would be fine with the watchdog disabled.. (just
UPDATE: Progress!
The stall was traced to a the while loop in dvr_input_ts ( dvr.c:68 )
When psi_reassemble does not increase off, it gets called again with the same
arguments - inf-loop
I believe that that can happen only when section-len == 0.
I have no idea where is that coming from nor
** Attachment added: GDB Stacktraces at the aborts
https://bugs.launchpad.net/ubuntu/+source/getstream/+bug/1175944/+attachment/3681137/+files/stacktraces.gz
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
** Patch added: Not a real fix, but at least it removes the crash symptom.
https://bugs.launchpad.net/ubuntu/+source/getstream/+bug/1175944/+attachment/3681138/+files/NOT_A_FIX-only-a-hack.patch
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is
Public bug reported:
Ubuntu Raring 64bit, up to date.
Imagemagick 8:6.7.7.10-5ubuntu2
I haven't seen any python/apport updates, so I assume it's still broken
(bug 1150335)
Steps to reproduce:
Open a picture with display
Place another window over the canvas (even IM's own menu would do)
- You
correction:
If the multiplex from the *affected (signal loss)* tuner was streamed
somewhere.
Well, the watchdog is really necessary.
The event loop gets stuck eventually when one of the tuners has poor signal
(and perhaps when I attempt to watch it?).
So far it seems that increasing the
I disabled the watchdog.
Temporary signal outage on one tuner does not affect other tuners for at least
30s.
If the multiplex from the tuner was streamed somewhere, a warning
appears on the console, saying demux: read in dvr_read returned with
errno 75
I wonder whether the libevent loop gets
According to the source code the SIGABRT watchdog thread should only be active
when compiled with DEBUG
That also produces a notice on every http stream start and end (also matches my
observations)
I'll try building it without debug to see whether it's really locking
up, or only the watchdog
Just as I expected. Adding new tuner to capture a weaker dvb-t multiplex
causes a sigabrt every now and then, usually at least once per hour,
causing disruptions to all multiplexes.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
Public bug reported:
I am running getstream on 4 usb tuners (one instance for all)
When any of the tuners loses signal, getstream aborts with SIGABRT.
That, obviously, interrupts all streams, even those streamed from good tuners.
I found an important information in the changelog:
I added a
note: I haven't observed this *so far*(statistically insufficient) with Raring
and kernel 3.8.0-19-generic.
X11 #0 always ends up on VT8, though (and X11 #1 on VT9)
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
Confirming, no more crashes with 0.80~exp2
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1097532
Title:
synaptic crashed with SIGSEGV in File() (or in pkgRecords::Lookup())
when trying to remove
Public bug reported:
Startup of synaptic and virtually any click in the GUI produces a lot of
messages like this one.
(synaptic:4509): Gtk-WARNING **: GtkNotebook 0x19204a0 is mapped but
visible child GtkLabel 0x1afd130 is not mapped
This is not filled using apport, because I doubt it's fixed (
It was a bit harder to figure out the position of the topright fbrun
this time..
So far it seems to always work when the topright fbrun obstructs one of
the red blinking lights.
I was unable to reproduce easily with vlc, likely because of it's bottom status
bar preventing easy placement of the
correction: fbrun should be obstructing one or more of the red blinking lights.
I usually position it over the three lights that are closer together.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
a copy of https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-
video-intel/+bug/1162046/comments/10
The fix arrived with the updates today.
Most of the corruption is gone. Almost all the frames now get though undamaged.
Thanks for the fix.
BUT
Some of the video frames still get damaged
** Attachment added: video file I could reproduce with
https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-video-intel/+bug/1170117/+attachment/3646845/+files/testcase.ts
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
** Attachment added: window layout example
https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-video-intel/+bug/1170117/+attachment/3646846/+files/fbrun-layout.jpg
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
Public bug reported:
This is a followup to #1162046
The issue is almost fixed, but the corruption wasn't eradicated completely.
This time the actual video content matters (guess: partial frame updates?)
** Affects: xserver-xorg-video-intel (Ubuntu)
Importance: Undecided
Status:
The remaining corner case described in comment#10 is now filled as
#1170117
The attachments related to that corner case were moved to that bug.
** Attachment removed: video file I could reproduce with
The fix arrived with the updates today.
Most of the corruption is gone. Almost all the frames now get though undamaged.
Thanks for the fix.
BUT
Some of the video frames still get damaged when drawn.
However, it does depend on the video content (and possibly on (absolute) window
positions)
I
** Attachment added: video file I could reproduce with
https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-video-intel/+bug/1162046/+attachment/3641317/+files/testcase.ts
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
** Attachment added: window layout example
https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-video-intel/+bug/1162046/+attachment/3641318/+files/fbrun-layout.jpg
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
** Summary changed:
- [eCryptfs] Delete files and Remove leaks HDD space
+ [eCryptfs on ext4] Delete files and Remove leaks HDD space
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1162820
Title:
The HDD space leak makes it hard to debug..
I tried with a more precise approach this time and installed no updates between
downloading and removal.
The file I removed had 30MB, Free space before removal: 47M, Free space after
removal: 47M
Is there anything in particular that I should try?
I
Apport is still broken, see #1150335
** Changed in: linux (Ubuntu)
Status: Incomplete = Confirmed
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1162820
Title:
[eCryptfs on ext4] Delete
I managed to reproduce on another box I don't care about.
The issue exists with the mainline kernel mainline/v3.9-rc2-raring
** Tags added: kernel-bug-exists-upstream
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
I am not sure that the tag kernel-bug-exists-upstream is correct
(This might not be a kernel bug)
The issue lies somewhere in the chain transmission-ecryptfs-
ext4(nodiratime,relatime,discard)
** Changed in: linux (Ubuntu)
Status: Confirmed = Invalid
** Changed in: ecryptfs-utils
OOPS.. I just found out what is happening.
Transmission established a folder called ~/.local/share/trash and
moved the file there instead of deletion!
This is a serious issue. How was I supposed to know that one application
decided that I want to keep my garbage?
The button should be renamed
I guess this is fixed. This error is gone.
It was replaced by
*** Collecting problem information
The collected information can be sent to the developers to improve the
application. This might take a few minutes.
.
*** Problem in libgl1-mesa-glx
The problem cannot be reported:
Public bug reported:
I have a proprietary application crashing on SIGBUS during a /dev/dri/card0
ioctl
Unfortunately that provides no information at all
I tried with LIBGL_ALWAYS_INDIRECT=y and the X11 crashed.
Full Xorg logfile is attached.
When the X11 crashes this way, I immediately
** Description changed:
- I have a proprietary application crashing on SIGBUS during a /dev/dri/card0
syctl
+ I have a proprietary application crashing on SIGBUS during a /dev/dri/card0
ioctl
Unfortunately that provides no information at all
I tried with LIBGL_ALWAYS_INDIRECT=y and
Public bug reported:
Release: 13.04 Raring
Package: transmission-gtk 2.77 (14031)
Package: ecryptfs-utils 103-0ubuntu2
Kernel: 3.8.0-14-generic x86_64
Using ecryptfs = Yes
This used to happen on 12.10 Quantal as well.
download something.
(Wait a year,install updates.. - My ecryptfs directories
Ah.. It is actually dependent on the theme selected in fluxbox.
It happens only with themes that have round window corners (bora_*,
zimek_*)
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1162046
Did that help?
PS: pekwm's default theme also has round corners.
PS2: The video can be even in a paused state.
(in VLC that doesn't even stop the flickering, while in mplayer2 it does.
But the way how the frame is damaged changes with the position of the
obstructing windows)
For very small
Sure
started X11, played a video, obstructed it, closed X11
** Attachment added: Xorg.1.log
https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-video-intel/+bug/1162046/+attachment/3607914/+files/Xorg.1.log
--
You received this bug notification because you are a member of Ubuntu
Public bug reported:
Xv video does not paint properly when partially obstructed by multiple windows
in certain places.
(see the attachment)
Note that one of the obstructing windows depicts my attempt to use apport-bug.
I tried with mplayer2 and vlc as Xv video players.
I tried with Pekwm and
Public bug reported:
$ seq -s, 5
Expected: 1,2,3,4,5
Got: 1\n2,3,4,5,
(\n denotes a newline)
Also note the extreme difference between outputs of these
$ seq -s ',' 5
1\n2,3,4,5,
$ seq -s ', ' 5
1, 2, 3, 4, 5\n
** Affects: coreutils (Ubuntu)
Importance: Undecided
Status: New
v3.8.4 turns the screen off.. The issue exists in there.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1155926
Title:
GeForce FX 5700 - Digital DVI output turned off on boot, X11 does not
see the
I tried to run the mainline kernel for testing another bug on another machine
and it behaves rather funny.
( see https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1155926/comments/4 )
I'll attempt to reproduce this bug on hardware+system I don't care
about.
--
You received this bug
Public bug reported:
I upgraded to Raring and lost my digital video output.
The computer has 01:00.0 VGA compatible controller: NVIDIA Corporation NV36.2
[GeForce FX 5700] (rev a1) video card.
The card has two connectors (VGA and DVI-I) and provides THREE video outputs
(2x analogue, 1x
I am unable to run apport (to get my sound configuration published as requested)
It's broken on Raring. ( #1150335 )
I browsed syslog dmesg for any interesting info and found none.
I'll attach the actually necessary info as soon as requested.
** Changed in: linux (Ubuntu)
Status:
I tried a mainline kernel: mainline/v3.9-rc2-raring
It works.
** Tags added: kernel-fixed-upstream
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1155926
Title:
GeForce FX 5700 - Digital DVI output
I ran that kernel and did
sudo apt-get update sudo apt-get upgrade.
it did what was there to do
..and left me in a root shell !
Or maybe both user and root shell fighting over the VT1 input.
Hitting Ctrl+D (crashed? and) rebooted the computer.
That is really weird and I further undermines
I am unable to test with the mainline kernel.
The mainline kernel package is not signed
and kernel.ubuntu.com/~kernel-ppa/mainline/v3.9-rc1-raring/ doesn't seem to
support HTTPS.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
I started X11 with xinit -- :1 -nolisten tcp and executed sudo -b synaptic
three times.
Additionally to my password not being accepted the X11 also crashed because of
a segfault.
The log was the same.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is
Therefore is is not tied to any window manager, even xterm crashes it
under some conditions.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1071868
Title:
X11 segfaults on WM start, ATI 3|D Rage IIC
I think I can do that.
How do I verify the package's integrity?
The KernelMainlineBuilds page does not tell and the download page doesn't even
seem to support https.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
Public bug reported:
I visited:
http://kernel.ubuntu.com/~kernel-ppa/mainline/v3.9-rc1-raring/
Waited until the page loaded.
Then I added s to http
https://kernel.ubuntu.com/~kernel-ppa/mainline/v3.9-rc1-raring/
waited for the timeout
and got this instead of the usual timeout message
XML
Update: Well, it could support https, but I am getting a timeout.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1067019
Title:
Cannot switch VT [regression]
To manage notifications about this bug
Still an issue in Raring.
** Tags added: raring
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1071868
Title:
X11 segfaults on WM start, ATI 3|D Rage IIC [regression]
To manage notifications about
PS: That machine also produced the warning message 45 times.
** Description changed:
- Hello.
+ After upgrade to Ringtail and reboot I launched synaptic to remove usual
+ self-appointed junk.
- After upgrade to Ringtail and reboot I launched synaptic to remove usual
- self-appointed junk and
UPDATE:
I got my hands on another machine that was updated to Raring..
Clicking ANY of the items that have vanished from the repo causes the crash.
Attempt to select them via keyboard also produces the same crash.
These items (by their nature) are only found in the Status-Not Installed
Still an issue in 12.04 Raring.
Logging out and back on on VT7 usually unblocks VT switching.
** Also affects: linux
Importance: Undecided
Status: New
** Tags added: raring
** Project changed: linux = linux-meta (Ubuntu)
** Package changed: linux-meta (Ubuntu) = linux (Ubuntu)
--
1 - 100 of 298 matches
Mail list logo
