** Changed in: linux-source-2.6.20 (Ubuntu)
Assignee: Registry Administrators (registry) = (unassigned)
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/110636
Title:
hdparm - cannot set dma on
I am sorry spoke too early.
DVDRIP its ok , It was not DVDRIP the issue .
Some how I found in /etc/modprobe.d/options this 2 lines =
# XXX: Ignore HPA by default. Needs to be revisted in jaunty
options libata dma=1 ignore_hpa=1
After removing that options for libata , update-initramfs -u
Not sure If it same issue as I had experience with my intrepid upto date ,
Today after renting a dvd movie had similar issue as this bugs refers to ,
playing dvd movie with any player my cpu goes really high , playing the movie
looks as if I am playing the movie in slow motion, reading the
I updated from 2.6.24 to 2.6.27 (From Hardy to Intrepid) and my drives changed
from hd* to sd*.
Since that change, all drives are very slow (HDD and DVD). For burning a 2Gb
disk it took about an hour!
I have read many forums and I have tried several setups, specially with kernel
options and in
I kind solved my problem temporally:
I added Hardy repositories and installed only 2.6.24-21-generic.
I started with that kernel and my sd* became hd* and all the
information/tune-up of hdparm
works just fine.
NOW:
/dev/hda:
Timing cached reads: 918 MB in 2.00 seconds = 458.69 MB/sec
Maybe from developers' viewpoint it's a feature, but from my viewpoint it's
still a bug. I want to turn DMA *off*. Welcome to Asus A6R, the laptop from
hell. Depending on DMA mode of the DVD drive and whether you're running X or
not, either your USB controller or the network card might get
If it is intentional that libata has less functionality (and removing
user configuration is removing functionality), then why use it? This has
made my Asus L2D (SIS 5513 IDE / SIS 730 chipset) too slow to be any use
since Feisty. It was (among other problems) for this kind of reduced
functionality
The suggestions of alih few posts back resulted in slow HDD
performance for me. Buffered reads went from 19MB/s to 3MB/s. I'm using
a Via82Cxxx chipset, the drivers for which seem to have been removed
from (at least) Hardy.
--
hdparm - cannot set dma on IDE hard drive that works via pata
Hi Guys,
There hasn't been any recent comments lately so I'm curious if someone
would care to confirm this is still an issue with the latest Alpha for
the upcoming Intrepid Ibex 8.10 which has a 2.6.26 based kernel -
http://www.ubuntu.com/testing. Please let us know your results. If you
still
I'm not sure why this was left marked as New because it was declined and
considered invalid a long time ago. It is very much intentional that
libata does not support manual configuration of dma mode by the Linux
Kernel developers. If libata is not automatically detecting and using
the best mode
I've fixed this by switching to IDE drivers.
To do this, append those lines to /etc/initramfs-tools/modules:
atiixp # change to your chipset driver!
ide_core
ide_cd
ide_disk
ide_generic
blacklist ata_generic
blacklist pata_atiixp
blacklist pata_acpi
Maybe you don't need the blacklist stuff, I'm
I've experienced as well this dma problem under ubuntu hardy, with
kernel 2.6.24.x series. The second fix suggested by C. Cooke worked
like a charm on my system. I've added combined_mode=libata option to
/boot/grub/menu.lst file and ran update-grub to permanently boot the
system with this option
** Changed in: linux-source-2.6.22 (Ubuntu)
Status: Incomplete = Won't Fix
** Changed in: linux (Ubuntu)
Status: Incomplete = New
--
hdparm - cannot set dma on IDE hard drive that works via pata
https://bugs.launchpad.net/bugs/110636
You received this bug notification because you
Still present with Hardy for me on the IDE DVD drive:
UDMA modes: udma0 udma1 *udma2 udma3 udma4
[ 41.718086] ata9.00: limited to UDMA/33 due to 40-wire cable
Attaching dmesg / lspci -vvn / hdparm -i /dev/scd1.
** Attachment added: dmesg lspci -vvn hdparm -i /dev/scd1
@rockonfred
I got an ICH7 rev 02 (Intel 82801G). The tips in the wiki are for another
problem (HDIO_SET_DMA failed: Operation not permitted).
--
hdparm - cannot set dma on IDE hard drive that works via pata
https://bugs.launchpad.net/bugs/110636
You received this bug notification because you
I don't have a ThinkPad. How can i found out whether i got an ICH6-M?
--
hdparm - cannot set dma on IDE hard drive that works via pata
https://bugs.launchpad.net/bugs/110636
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
Tried this?
http://www.thinkwiki.org/wiki/Problems_with_SATA_and_Linux
--
hdparm - cannot set dma on IDE hard drive that works via pata
https://bugs.launchpad.net/bugs/110636
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
Hi all,
I think Im no more facing the issue in Hardy heron. Not sure @ which
point it got resolved, but I would like to add that recently I changed
my BIOS setting to AHCI. (Intel ICH9 for SATA and Marvel for IDE) my
Motherboard is an Intel DG33TL. Some info below which should be use ful,
Hi, i just found this bug report and i've got exactly the same problem.
Just a question: Why is the importance set to medium? Shouldn't it be
set to critical as it stops me from using Ubuntu 7.04 at all.
--
hdparm - cannot set dma on IDE hard drive that works via pata
Hi,
same problem here. I have 25 pc's with this problem.
I agree with Jan Niklas Hasse, this bug should be critical! It's impossible to
let students use these pc's.
Does anyone have a clue if this will be fixed soon? If not I will have
to reinstall 25 opensuse's.
Thanks
##
IDE interface:
heret1c: yes of course hdparm -d1 works, both for hard disk and cdrom.
And you don't need to be a programmer to compile the kernel (I am not a
programmer). You will find different howtos to learn and there are
forums where to post questions abut kernel compiling. I'm afraid the
site administrators
Here's a fresh dmesg. Recalcitrante - did hdparm -d1 etc work after modifying
the kernel? I am not a programmer (some may have guessed...;) so messing around
with the kernel is a bit like a layman performing brain surgery. So. Should I
wait until there is an official fix, or attempt to learn
Must report same problem. I have an oldish laptop (about 5 yrs), a Dell
Latitude D500. I replaced the old HD which died last week with a brand
new one, tried all the boot modifications, with no luck. Seeing this
problem was introduced in the Feisty version,.and it has a serious
impact on those it
Jan, heret1c: Both your dmesg dumps are unusable - you have too many
warnings from network drivers. Perhaps if you included /var/log/dmesg ?
That should contain the bootup dmesg output.
--
hdparm - cannot set dma on IDE hard drive that works via pata
https://bugs.launchpad.net/bugs/110636
You
** Attachment added: dmesg.0
http://launchpadlibrarian.net/12229701/dmesg.0
--
hdparm - cannot set dma on IDE hard drive that works via pata
https://bugs.launchpad.net/bugs/110636
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
The same problem.
I couldn't try the first remedy of C. Cooke for the same reason as
Heret1c: and old Dell (Inspiron 3700) with a new disk installed, which
doesn't allow me to modify the BIOS.
combined_mode=libata or combined_mode=ide as kernel parameter didn't
work.
Disable libata (CONFIG_ATA)
To clarify:
Reports that the bug is still present in Hardy after trying the fixes
need to contain:
* The output of 'dmesg'
* The output of 'lspci -vvn'
* The output of 'sudo hdparm -i /dev/sdN' (where sdN is your disk).
Hope this helps.
--
hdparm - cannot set dma on IDE hard drive
Since it's now almost certainly too late to fix in Gutsy, I've added the
hardy kernel as 'Incomplete'. I've also done a little research into the
problem; it appears to be a known problem with libata and certain
chipsets: http://linux-ata.org/faq.html#combined
The link above suggests several
** Also affects: linux-source-2.6.24 (Ubuntu)
Importance: Undecided
Status: New
--
hdparm - cannot set dma on IDE hard drive that works via pata
https://bugs.launchpad.net/bugs/110636
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to
I tried the second fix (first did not work with my bios), but nothing
changed. I attached the 3 outputs with combined_mode=ide.
** Attachment added: Desktop.tar.bz2
http://launchpadlibrarian.net/12198922/Desktop.tar.bz2
--
hdparm - cannot set dma on IDE hard drive that works via pata
I am doing tests on several machines with Ubuntu 8.04 and I am
experiencing a similar problem. I have opened a new bug (#195221), since
I think both bugs are related, but I do not think that the problem is
the same of this one.
I am working with a SSD, identical to a high speed (300x)
I had the same problem, performance sucked, disks went from sdaX to
hdaX, audio playback was lousy, etc.
I was able to fix it by adding hda=noprobe into kernel boot parameters.
So I changed my /boot/grub/menu.lst kernel line from (only relevant
parts shown)
kernel
Me too with Ubuntu 7.10 server.
This is a devastating loss of performance and functionality; it means my
machine is now unusable as a media server. If a fix is not imminent,
I'll have to revert to an older operating system. It was all working
perfectly with Suse 10.
--
hdparm - cannot set dma
2 Graham Borland:
Don't count on it. Check the net, there a lot of bugs like this that have not
been updated for a long time, and several of them even have the fixes in the
comments already nobody is going to fix them any time soon and probably not
this one..
--
hdparm - cannot set dma on
And as you can see, this bug has not been even updated for the 8.10 relase (i'm
not even saying that they ignored it in the 7.10 release).
It hasn't been updated since it was declined for feisty..
--
hdparm - cannot set dma on IDE hard drive that works via pata
concerning mp995:
if i check with hdparm -i the default setting seems alright.
i just got confused by the output without -i in combination with the system
being on 99% iowait for hours after the installation. but that is probably
another problem (my guess is slocate).
--
hdparm - cannot set
same problem with an mp995 and the current xubuntu 7.10 iso.
--
hdparm - cannot set dma on IDE hard drive that works via pata
https://bugs.launchpad.net/bugs/110636
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
ubuntu-bugs
I also have the same issue..
I observe that DMA is not enabled on my HDDs and I'm unable to enable
them using hdparm. I have no idea how to accomplish the same using sdparm
As a result, the drives are running slower.
Apparently, this due to the conversion of HDX to SDX (hda to sda) in
recent
I also have the same issue..
I observe that DMA is not enabled on my HDDs and I'm unable to enable
them using hdparm. I have no idea how to accomplish the same using sdparm
As a result, the drives are running slower.
Apparently, this due to the conversion of HDX to SDX (hda to sda) in
recent
Same problems here on gutsy. Got 7200 hitachi pata drive, wich reports
that it should support udma5. It's set on udma2 and hdparm can't change
this parameter (or any other). The read/write times are making me really
annoyed.
hdparm -i /dev/sda:
Model=HTS721010G9AT00 ,
I don't have any more reading/writing lags on Gutsy on the same platform
hdparm - i :
Model=Hitachi HTS541612J9SA00 , FwRev=SBDOC70P, SerialNo=
SB3D00E5G289TA
Config={ HardSect NotMFM HdSw15uSec Fixed DTR10Mbs }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=4
As far as I can tell, gutsy just disabled DMA on the CD-ROMs on both my
bog-standard Dell desktop and my Thinkpad X40. This is not obscure
hardware, and yet I can't watch DVDs without jerking on a 3Ghz
processor.
Any information you need, I'll provide. But please sort this out.
Gerv
--
hdparm
when will the ubuntu team fix this annoying bug?
--
hdparm - cannot set dma on IDE hard drive that works via pata
https://bugs.launchpad.net/bugs/110636
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
ubuntu-bugs
HI Henrik, no unfortunately. I was quite busy for the past month. i was
in the process of changing jobs/towns. i had gutsy installed my work pc.
now i'm using a dell 640m and i just don't have the time now to test
tribe cd's because i really need to be productive with stable software.
just for the
** Attachment added: bench.txt
http://launchpadlibrarian.net/9200948/bench.txt
--
hdparm - cannot set dma on IDE hard drive that works via pata
https://bugs.launchpad.net/bugs/110636
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for
Ivan, did you get a chance to gather the requested gutsy information?
--
hdparm - cannot set dma on IDE hard drive that works via pata
https://bugs.launchpad.net/bugs/110636
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
Temp fix
* Use cation and research first, the following HAS worked for me
* under Feisty and Gusty SO FAR .
I will NOT BE held responsible for any damage, I'm passing this on as an
* option / quick fix. Later in the build the following might break your system.
* Keep a note handy with
Lot of misleading stuff in this report. I see several people showing
they cannot enable DMA. Some are shown on hda and some are on sda. So
this complicates the needs PATA driver, not IDE driver. Also, some
reports show that udma is actually enabled.
Also, to explain the problem a bit better for
Will be glad to help and provide you with this information tomorrow!
thanks for the update on the matter!
--
hdparm - cannot set dma on IDE hard drive that works via pata
https://bugs.launchpad.net/bugs/110636
You received this bug notification because you are a member of Ubuntu
Bugs, which is
To be honest, I'm not sure I will be able to help. As I said earlier, it
is a flatmates laptop, and the odds of him letting me put gutsy on it
before release would tend towards nil.
--
hdparm - cannot set dma on IDE hard drive that works via pata
https://bugs.launchpad.net/bugs/110636
You
I still have feisty running on one of my systems and have collected the
information as requested. I will keep feisty on this system and do not
intend to regress it. This system has multiple PATA drives none of
which DMA can be enabled. The system was upgraded from edgy and didn't
have the
** Changed in: linux-source-2.6.22 (Ubuntu)
Importance: Undecided = Medium
Assignee: (unassigned) = Ubuntu Kernel Team
Status: New = Triaged
--
hdparm - cannot set dma on IDE hard drive that works via pata
https://bugs.launchpad.net/bugs/110636
You received this bug notification
Ivan
If you are experiencing the same problems in gutsy, why don't you go ahead and
file a new report against gutsy's kernel package?
There's a chance that it might get fixed before release.
--
hdparm - cannot set dma on IDE hard drive that works via pata
https://bugs.launchpad.net/bugs/110636
My bad. On gutsy, you still cannot enable dma with hdparm, but the tests look a
better:
/dev/sda:
Timing cached reads: 768 MB in 2.00 seconds = 383.85 MB/sec
Timing buffered disk reads: 84 MB in 3.04 seconds = 27.62 MB/sec
--
hdparm - cannot set dma on IDE hard drive that works via
Thats disappointing as many people I know use ubuntu on older hardware
for media servers and currently have over 1TB of PATA disk attached to
mine (Lossless audio streaming and photography). While I dont use mine
for DVD playback, the performance hit for PATA disk is too severe and
have reverted
The thing that I don't like here is that there has been no info on why
it was decided to do this even though the ubuntu team knew that this
would decrease performance drastically. All we got was an excuse and
that it wouldn't be done soon. well, it doesn't look like it will be
fixed in gutsy.. so
either way, this wont get fixed in feisty.
It is definately a lack of functionality in the driver. My CD drive does
support DMA, as it worked pre-libata. I think this is an important
issue, and should be addressed WITHIN feisty. Since the old pata driver
is still included, all that is needed is a
I think so too. It's not really hard to fix. I just want to revert to
the old PATA driver.
--
hdparm - cannot set dma on IDE hard drive that works via pata
https://bugs.launchpad.net/bugs/110636
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact
I just installed the latest devel version of gutsy... nothing changed.. same
old problems...
Will this be addressed at all?
--
hdparm - cannot set dma on IDE hard drive that works via pata
https://bugs.launchpad.net/bugs/110636
You received this bug notification because you are a member of
Either way, this wont get fixed in feisty.
What. The. Hell?
--
hdparm - cannot set dma on IDE hard drive that works via pata
https://bugs.launchpad.net/bugs/110636
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
ubuntu-bugs
This is either lack of functionality in the driver, or the physical
device really doesn't support it.
Either way, this wont get fixed in feisty. Please test gutsy and report
findings here if it is still a problem (also add a linux-source-2.6.22
target, but do not change the 2.6.20 one).
Thanks
Same here, works neither for hdd nor dvd.
--
hdparm - cannot set dma on IDE hard drive that works via pata
https://bugs.launchpad.net/bugs/110636
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
ubuntu-bugs mailing list
I have two PATA based systems which now have woeful disk throughput
following the feisty upgrade and aren't able to re-enable DMA on either
system (e.g. less than 5MB/sec). One is a Via based MSI K7T266 Pro 2-A
(6380), the other is an Intel based ASUS CUSL2-C. The Via system used
to enjoy
This seems to be a fairly major sticking point for some people. DMA is
pretty vital. From what I can tell from reading up on the issue, it
seems to be a kernel / libata problem. I have assigned this to kernel-
bugs in order to at least get someone who will know more looking into
it.
** Changed
** Changed in: linux-source-2.6.20 (Ubuntu)
Sourcepackagename: hdparm = linux-source-2.6.20
--
hdparm - cannot set dma on IDE hard drive that works via pata
https://bugs.launchpad.net/bugs/110636
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact
I apologise if I am trashing this bug with my changes, but from what I
can tell this would be more appropriate for the kernel guys to deal
with, and is a bug in the kernel-source. Bear in mind I'm no tech guru,
but from what my research tells me (trying to make DMA work on a
flatmate's laptop with
Any news on this? Is this bug confirmed or what? has anybody even looked
at it?
--
hdparm - cannot set dma on IDE hard drive that works via pata
https://bugs.launchpad.net/bugs/110636
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
I have the same problem.
Here is my hdparm settings:
** Attachment added: hdparms
http://librarian.launchpad.net/7569259/hdparms
--
hdparm - cannot set dma on IDE hard drive that works via pata
https://bugs.launchpad.net/bugs/110636
You received this bug notification because you are a member
I am having this problem with my DVD drive. My hard drive is fine.
I think an option should be added to feisty to revert back to the old
driver until the new one is more mature. I have tried blacklisting
libata (in the initramfs too) to cause the kernel to fall back. However,
the module is still
Just to endorse - I have the same problem after replacing my edgy and
dapper with a fresh install of feisty. Unfortunately I installed feisty
for a couple of windows user frens and they just haven't stopped
complaining how bad linux is at doing simple things..
--
hdparm - cannot set dma on IDE
same problem here. I have reverted to edgy kernel which gives double
Mb/s for buffered disk reads (hdparm -tT) than feisty kernel does.
--
hdparm - cannot set dma on IDE hard drive that works via pata
https://bugs.launchpad.net/bugs/110636
You received this bug notification because you are a
Just to endorse it: I have the same problem here. hdparm worked on
Hoary, Dapper and Edgy, but in Feisty it doesn't.
--
hdparm - cannot set dma on IDE hard drive that works via pata
https://bugs.launchpad.net/bugs/110636
You received this bug notification because you are a member of Ubuntu
Bugs,
Here is dmesg
** Attachment added: dmesg.txt
http://librarian.launchpad.net/7440822/dmesg.txt
--
hdparm - cannot set dma on IDE hard drive that works via pata
https://bugs.launchpad.net/bugs/110636
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug
Here is lspci
** Attachment added: lspci.txt
http://librarian.launchpad.net/7440824/lspci.txt
--
hdparm - cannot set dma on IDE hard drive that works via pata
https://bugs.launchpad.net/bugs/110636
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug
and lsmod. If anything else is needed, just ask. I want to help as much
as i can!
** Attachment added: lsmod.txt
http://librarian.launchpad.net/7440826/lsmod.txt
--
hdparm - cannot set dma on IDE hard drive that works via pata
https://bugs.launchpad.net/bugs/110636
You received this bug
ah. just remembered - hdparm -i /dev/sda
** Attachment added: hdparminfo.txt
http://librarian.launchpad.net/7440832/hdparminfo.txt
--
hdparm - cannot set dma on IDE hard drive that works via pata
https://bugs.launchpad.net/bugs/110636
You received this bug notification because you are a
76 matches
Mail list logo
