Unfortunately, it doesn't work either (same messages) - so the
question is open again.
Thanks, Jo
Zitat von Wim Vandersmissen [EMAIL PROTECTED]:
Could you try this bootdisk on
http://bofh.be/unattended/linuxboot.iso
and let me know if you also get the illegal instruction
Ok, try again, another image is ready.
I think the problem lays with the fact that bash is compiled for i686 and
you're using an AMD box.
The bash in the new iso I just put up is compiled for i386, which should give
no problems.
Could you try again? (http://bofh.be/unattended/linuxboot.iso)
On Sun, Aug 29, 2004 at 09:50:46AM -0400, Patrick J. LoPresti wrote:
Wim Vandersmissen [EMAIL PROTECTED] writes:
I think the problem lays with the fact that bash is compiled for
i686 and you're using an AMD box.
Ah, good thinking, Wim! I would have missed it.
It is not just bash,
hm...I tried the new ISO-Image and it still doesn't work (same errors). :-(
thanks
trust
--
Supergünstige DSL-Tarife + WLAN-Router für 0,- EUR*
Jetzt zu GMX wechseln und sparen http://www.gmx.net/de/go/dsl
---
This SF.Net email is sponsored
The new image also gets an illegal instruction. Maybe the
reason is elsewhere? (the CPU is a Intel Pentium-S 200 Mhz)
Regards, Jo
Zitat von Wim Vandersmissen [EMAIL PROTECTED]:
Ok, try again, another image is ready.
I think the problem lays with the fact that bash is compiled
for i686 and
On Sun, Aug 29, 2004 at 09:50:46AM -0400, Patrick J. LoPresti wrote:
Wim Vandersmissen [EMAIL PROTECTED] writes:
I think the problem lays with the fact that bash is compiled for
i686 and you're using an AMD box.
Ah, good thinking, Wim! I would have missed it.
It is not just bash,
It works great - the illegal instruction is gone! Thank you
very much!!
Now I get another error later on:
Bios EDD Facility v0.16 2004-Jun-25, 1 devices found
..done loading edd
*** ...and locate the boot device
*** find-boot-device failed
*** Dropping to shell
# with 1 Maxtor 2B020H1 IDE HD
jo / ak [EMAIL PROTECTED] writes:
Now I get another error later on:
Bios EDD Facility v0.16 2004-Jun-25, 1 devices found
..done loading edd
*** ...and locate the boot device
*** find-boot-device failed
*** Dropping to shell
# with 1 Maxtor 2B020H1 IDE HD and 1 CD-Drive
This probably
Zitat von Patrick J. LoPresti [EMAIL PROTECTED]:
Does ls /sys/block show any hdX directories?
it shows hda/hda1, no hdc
You were right, there is an error earlier, in PIIX4. But I don't
understand what's going on:
loading ide-generic
[...]
ide: Assuming 33MHz system bus speed for PIO mode;
Hello @all.
I've tried to boot from a Linux-CD on 3 different PC's. Everytime I get
this:
...
...
WELCOME!
Illegal Instruction!
Illegal Instruction!
Illegal Instruction!
***Master Script Exited!***
Hm, may be we are on a serial console
...
I've also tried to use parameters like acpi=off or
Hello @all.
I've tried to boot from a Linux-CD on 3 different PC's. Everytime I get
this:
...
...
WELCOME!
Illegal Instruction!
Illegal Instruction!
Illegal Instruction!
***Master Script Exited!***
Hm, may be we are on a serial console
...
I've also tried to use parameters like acpi=off or
I have the same problem with two different PCs (both
comparatively old, with Asus P/I P55T2P4 and Asus TXP4
Mainboards). Version is 4.4b.
For me, the sequence is:
..
WELCOME!
Illegal Instruction!
Illegal Instruction!
Illegal Instruction!
Illegal Instruction!
Hm, may be we are on a serial console.
12 matches
Mail list logo