ted in it id<444210273>
dst<601>, type<1>
Best Regards.
Arif Noor
*From:* Gorki Alfaro
*Sent:* Tuesday, May 12, 2020 11:19 AM
*To:* Wan Md Arif Noor Bin. Wan Nizam
*Cc:* kannel users@kannel.org
*Subject:* Re: DLR but could not find message or was not interested Issue
n. Wan Nizam
Cc: kannel users@kannel.org
Subject: Re: DLR but could not find message or was not interested Issue
Hello
Try to changing your msg-id-type = 0x01
Regards
Gorki
On Mon, May 11, 2020 at 9:12 PM Wan Md Arif Noor Bin. Wan Nizam
mailto:md.a...@forest-interactive.com>> wrote:
Hello
Hello
Try to changing your msg-id-type = 0x01
Regards
Gorki
On Mon, May 11, 2020 at 9:12 PM Wan Md Arif Noor Bin. Wan Nizam <
md.a...@forest-interactive.com> wrote:
> Hello Guys,
>
>
>
> I’ve been struggling to find what is the issue with the DLR which
> regularly getting error “DLR but could
Hello vinayak,
Good to see you after a while. I was trying to contact you regarding
opensmpp box with DND feature. Let me know if you have it.
I have also found this issues, when we send MT SMS, in store it goes like
MO SMS instead of MT correct?
I had fixed this issues. Let me know if I
Hi,
Im talking about the kannel storage, not about the dlr table and i didnt
flush the database.store increases to more than 2lakhs MO-DLR
On Wed, 13 Nov 2019 at 3:39 PM, Web Min wrote:
> How size is the DLR Table? And did you try to empty the DLR it?
>
> On Wed, Nov 13, 2019 at 12:15 PM
How size is the DLR Table? And did you try to empty the DLR it?
On Wed, Nov 13, 2019 at 12:15 PM vinayak mv
wrote:
> Hi,
>
> When we are sending MT SMS about 1 lakhs or more , the kannel store is
> filled with DLR-MO messages and these messages are routing back to SQLBOX
> or OPENSMPPBOX at a
Hello.
You need to empty the database table, what is holding your DLR's.
kannel_dlr is the table.
1/17/2018 15:16 christopher kamutumwa kirjutas:
Hello support,
Am wondering how to delete/flush queued dlrs as its showing in my
status and seems to be slowing down things
DLR: received
Dear Filipe,
Are you use same smsc-id for 2 bearerboxes?
You can use REDIS DLR storage ( it's in memory key-value storage and vary
fast)
Redis can run on both servers as cluster or one of them or third server :)
I think you should solve your storage connection and bearerbox need that to
work.
On Thu, 2016-10-13 at 15:06, vinayak mv wrote:
> You can also use sqlbox which logs all sms mo mt and dlr
I know that but I prefer to have full control of the message flow
end-to-end in my program than to rely on sqlbox (or any other box)
especially for (near to) realtime message processing.
>
You can also use sqlbox which logs all sms mo mt and dlr
On Thursday 13 October 2016, Milan P. Stanic wrote:
> On Thu, 2016-10-13 at 12:59, ahmed qadeer wrote:
> > Can you please let me know how can we get DLR's of SMS being rejected due
> > to invalid number on SMSC level as
On Thu, 2016-10-13 at 12:59, ahmed qadeer wrote:
> Can you please let me know how can we get DLR's of SMS being rejected due
> to invalid number on SMSC level as operator is rejecting the SMS by the
> following error
>
>
> SMSC returned error code 0x009b (Unknown/Reserved) in response to
>
ges. at that that DLR miss will be more 1k...
>
> thanks
>
> fajar
>
>
> --
> *From:* Web Services <coinhost...@gmail.com>
> *To:* users@kannel.org
> *Sent:* Saturday, 2 July 2016, 18:55
> *Subject:* re DLR Missing on Hug Request
>
lt;coinhost...@gmail.com
> <javascript:_e(%7B%7D,'cvml','coinhost...@gmail.com');>>
> *To:* users@kannel.org <javascript:_e(%7B%7D,'cvml','users@kannel.org');>
> *Sent:* Saturday, 2 July 2016, 18:55
> *Subject:* re DLR Missing on Hug Request
>
> Can anyone help o
queue upto 10k
messages. at that that DLR miss will be more 1k...
thanks
fajar
From: Web Services <coinhost...@gmail.com>
To: users@kannel.org
Sent: Saturday, 2 July 2016, 18:55
Subject: re DLR Missing on Hug Request
Can anyone help on this ??
Hello,
am using kannel 1.4.4 with
Can anyone help on this ??
Hello,
am using kannel 1.4.4 with Ubuntu 14.4 but am facing an issue with large
volume of sms.
i mean my application and kannel works perfectly if i send upto 100's
message but on large volume like 10,000 or more i missed lots of DLR
reports. am using external
Hi
Check msg-type parameter. message id format must match between kannel and
smsc.
Regards
Alvaro
|-|
Envíe y Reciba Datos y mensajes de Texto (SMS) hacia y desde cualquier
celular y
Dear Team
I having this error in my logs and i don t know what to do, need help.
2016-06-21 22:06:11 [6136] [51] ERROR: SMPP[xxx]: got DLR but
could not find message or was not interested in it id<0484812104>
dst, type<1>
BR
2016-06-21 22:12 GMT+00:00 John Ivon :
>
exactly
On Sat, Feb 6, 2016 at 2:06 AM, Robin C wrote:
> Hi Juan,
>
> Thank you so much for your information. Those queued
> ones contain the contents of of group = dlr-db in the kannel configuration
> ?
>
> On Sat, Feb 6, 2016 at 9:31 AM, Juan Nin
Hi Robin!
Those queued ones are not DLRs that you have received, it's the info that
Kannel stores (on this case in MySQL) so as to be able to process DLRs.
So, when you receive a DLR from the remote SMSC, Kannel will search in
MySQL for a record that matches. Those records are deleted when you
Hi Juan,
Thank you so much for your information. Those queued
ones contain the contents of of group = dlr-db in the kannel configuration
?
On Sat, Feb 6, 2016 at 9:31 AM, Juan Nin wrote:
> Hi Robin!
>
> Those queued ones are not DLRs that you have
Hi Amit,
I guess there is a mismatch between your 2 SMSC ids (MT and MTS).
A record with smsc="MT" is stored by Kannel when the MT SMS is submitted.
But Kannel searches for a record with smsc="MTS" when the DLR is received.
Can't you setup a SMPP transceiver bind (instead of 2 separate binds)
Hi Hamza,
Thanx for your reply,
1) targeting wrong subscriber number format : This is not the case of
wrong subscribers number issue and wrong number format. All of them
delivered correctly but some of them are not able to get DLR, other DLR are
correct.
2) your target numbers are churned
Hi,
For the case where you are not getting the DLRs, you need to check with
operator. It's a painful troubleshooting because in huge volume of SMS
traffic, operators don't like to take traces for a single SMS. But they
would ask for tcpdump from your side, and you should take one. One thing:
Are
Too many UNDELIVERED means either you are targeting wrong subscriber number
format, or your target numbers are churned out/closed. EXPIRED means either
the SMSC threshold for storing UNDELIVERED is too small, or you are
targeting people who do not turn on their cellphones frequently, or have
This might be. Caused by many issues. You can ask telecom provider to
provide all error codes with descriptions.
On Oct 21, 2015 4:56 PM, "Achyut Raj" wrote:
> Hello Group,
>
> Our client is having issue on receiving DLR. Log stats shows something
> like ;
>
> 0.00%
Hi,
there is not enough infos to understand what’s going wrong.
Please post submit_sm to this failing DLR then we at least will see what
happened.
Thanks,
Alex
Am 15.08.2015 um 18:57 schrieb Moazzam moz...@gmail.com:
No not using multi part MT my all messages are carrying
2015-08-15 18:03 GMT+03:00 Moazzam moz...@gmail.com:
Thanks Alvaro, however, I do not think this is related to the dlr type.
Most of the time its working fine only couple of time we see this. For
example there were 146 such occurrence out of 28580 where we got this
error which is about 5%
No not using multi part MT my all messages are carrying
[flags:-1:0:-1:-1:31] within 140 char length limit.
On 8/15/2015 9:42 PM, spameden wrote:
2015-08-15 18:03 GMT+03:00 Moazzam moz...@gmail.com
mailto:moz...@gmail.com:
Thanks Alvaro, however, I do not think this is related to
Thanks Alvaro, however, I do not think this is related to the dlr type.
Most of the time its working fine only couple of time we see this. For
example there were 146 such occurrence out of 28580 where we got this
error which is about 5% of the total SMS sent on that day.
[kannel]# cat
Hi
Check the format of dlr-id some smsc use hex and some dec. Adjust kannel
config accordingly
I think the parameter to adjust is dlr-type
Regards
|-|
Envíe y Reciba Datos y mensajes
Do you receive DLR at all?
You need to check logs for your SMSC provider.
Do you use any http callback or just update via MySQL Trigger on INSERT of
sent_sms table?
It might be that under load your http server is not acting properly or
you're hitting some race condition in MySQL.
The best way
Write a script which takes input parameters. Set dlr-url to the path of
this script. The info can be sent anywhere you want.
On Fri, Mar 27, 2015 at 6:36 PM, Nestor Durañona
nestor.duran...@unnaki.com.py wrote:
Hi
I'm new in kannel, and I want to know how can I gather all the information
of
Update:
I have also tried switching to the dlr-storage = internal but I still
get the same behaviour.
I have also looked at the message
http://www.kannel.org/pipermail/users/2011-July/016176.html, which was
related to this issue but none of items have helped or been applicable.
The real
2014-11-05 18:27 GMT+01:00 Alvaro Cornejo cornejo.alv...@gmail.com:
- use sqlbox.
What's that?
Is an additional module that allows you to send/receive sms through a
database. Instead of calling smsbox for sending an sms, just do an insert on
a specific table and sqlbox will take care of
Hi Vincenzo
I still wonder how does it is reflected on the status admin page. Does
queued/pending dlr/sms counters grow indefinitely?
Regards
Alvaro
|-|
Envíe y Reciba Datos y
This means that, for example, if I
submit a message that cannot be delivered immediately (for some
reason) I should get a DLR for enqueueing to the SMSC and later on
one for the actual delivery to the handset.
Is this true?
Yes - you’ll get a DLR from the SMPP interface (depending on whom
Hi Vincenzo
Yes and no to your first question. You can ask your provider all
intermediate status with dlr-status=31; however it is to operator to decide
which, if any dlr status, they will provide you. They will configure this
on their smsc servers. With modems they usually only gives you final
2014-11-05 15:23 GMT+01:00 Christopher Burke christopher.bu...@simulity.com:
Do I need to implement a web service to be linked with the dlr-url
parameter, of should I simply enable an SQL based dlr-storage?
I use a web service for this. The GET-URL is called, which allows me to
process the
Yeah, I believe that DLR storage can be achieved using the Kannel SQLBox
project. I think GET-URL is possibly less complex. Depends if you’re only
storing DLRs or acting on them I guess.
Christopher Burke
http://simulity.com
Office: +44 (0) 1248 679 281
Fax: +44 (0) 1248 660 323
Skype:krslynx
2014-11-05 16:01 GMT+01:00 Christopher Burke christopher.bu...@simulity.com:
Yeah, I believe that DLR storage can be achieved using the Kannel SQLBox
project. I think GET-URL is possibly less complex. Depends if you’re only
storing DLRs or acting on them I guess.
I don't want to write another
I'm not too sure, I saw the sqlbox as a bit overkill / heavy for my needs.
I guess they're using insert instead of update as they're not updating a
record but adding a new record (I.e. Dlrs mean different things, so an
update is misleading).
If you want to just store dlr, sqlbox is probably fine,
Hi
Those sql commands are for kannel internal queue management only. That is
why there is no UPDATE.
You have 3 options:
- do your own dlr handler. It can be as simple as a php script that
receives the call and insert info in a database. You use dlr-url to call it.
- use sqlbox.
- hack kannel
2014-11-05 17:54 GMT+01:00 Alvaro Cornejo cornejo.alv...@gmail.com:
Hi
Those sql commands are for kannel internal queue management only. That is
why there is no UPDATE.
You have 3 options:
- do your own dlr handler. It can be as simple as a php script that receives
the call and insert
- use sqlbox.
What's that?
Is an additional module that allows you to send/receive sms through a
database. Instead of calling smsbox for sending an sms, just do an insert
on a specific table and sqlbox will take care of everything.
- hack kannel code to handle dlr as needed.
This is
2014-11-05 17:49 GMT+01:00 Christopher Burke christopher.bu...@simulity.com:
I'm not too sure, I saw the sqlbox as a bit overkill / heavy for my needs. I
guess they're using insert instead of update as they're not updating a
record but adding a new record (I.e. Dlrs mean different things, so an
Hi Alejandro
Change %26type%3D%25ddlr-mask=31 with %26type%3D25%26dlr-mask%3D31
Note that what you request as dlr is not necessarily what you will receive.
Carriers define which dlr status will they forward. Some disable
intermediate status, some allow all of them.
Regards
Alvaro
Hi Alvaro,
If i replace, it does not send dlr at all. According to the manual the
dlr-mask is not an param in the dlr-url.
Best
On Thu, Aug 21, 2014 at 1:37 PM, Alvaro Cornejo cornejo.alv...@gmail.com
wrote:
Hi Alejandro
Change %26type%3D%25ddlr-mask=31 with
2014-08-21 23:03 GMT+04:00 Alejandro Mussi alemu...@gmail.com:
Hi Alvaro,
If i replace, it does not send dlr at all. According to the manual the
dlr-mask is not an param in the dlr-url.
Best
You're correct.
Problem is with your SMSC provider. As long as you see only 8 and 16, first
Hi
Sorry you are right. Can you test this:
dlr-mask=31dlr-url=
http://localhost/sms/api/dlr.php?myId=1212%26type%3D%25d
Basically type should
|-|
Envíe y Reciba Datos y mensajes
Hi
Re-reading your original question I saw that, in fact, you do receive the
dlr.
2014-08-21 12:33:22 [2202] [7] DEBUG: DLR[internal]: Looking for DLR
smsc=tigo, ts=11e22675ee6, dst=595981414913, type=1
However kannel is unable to track it back to original message:
2014-08-21 12:33:22 [2202]
Still not working. Tried msg-id-type = 0x01 and still not working. Also
putting dlr-mask before dlr-url on the param sequence.
The thing is that i do receive the dlr when type=8 and type=16 but kannel
does not send me dlr with type=1.
If the message has been delivered to the phone.. should i
Hi
dlr 8 means message has been submitted to smsc (and accepted by it)
dlr 1 means message has been delivered to phone (and stored either in SIM
or phone memory)
Also; some operators does not provide all dlr status; however as stated on
my previous mail. kannel is in fact receiving the dlr with
Here goes the logs (tested with dlr-mask=3):
http://localhost:13013/cgi-bin/sendsms?username=xxxpassword=yyyto=+595981414913from=1244binfo=CMBEGtext=Prueba+de+serviciosmsc=tigodlr-mask=3dlr-url=http%3A%2F%2Flocalhost%2Fsms%2Fapi%2Fdlr.php%3FmyId%3D1212%26type%3D%25d
bearerbox.log
2014-08-21
Mask 63 works for most of the message states.
On Thu, Jun 26, 2014 at 11:31 PM, [Digital^Dude] ® millennium@gmail.com
wrote:
What's your dlr-mask?
And this may be an operator specific issue as they might only have allowed
one retry per submit_sm from the ESME hence not allowing any
Problem is with your operator. Check with it.
On Tue, Jul 1, 2014 at 7:25 PM, Michael Stevens
michael.stev...@mcmcas.co.za wrote:
Hi….
I have installed Kannel 1.50 and is using dlr for ams status reports. The
mask I am using is 31.
Everything works fine. I get the ACK/NAC report and the
Hi Mario,
Would it be possible to supply the full submit_sm, submit_sm_resp, and
deliver_sm PDU dumps?
On 18 July 2014 22:12, Mario Noboa mnobo...@gmail.com wrote:
Hi list,
I got a DLR problem with an operator.
When sent a submit_sm, kannel receipt a message id:
*message_id: 1e13a15*
Of course Niel, thanks!!!
2014-07-18 15:30 GMT-05:00 Niel Smith daniel.alfred.sm...@gmail.com:
Hi Mario,
Would it be possible to supply the full submit_sm, submit_sm_resp, and
deliver_sm PDU dumps?
On 18 July 2014 22:12, Mario Noboa mnobo...@gmail.com wrote:
Hi list,
I got a DLR
It looks like your SMSC operator gives hex number in submit_sm packet and
hex number in deliver_sm, so you need to add this in smsc group
configuration:
msg-id-type = 0x02
2014-07-19 0:40 GMT+04:00 Mario Noboa mnobo...@gmail.com:
Of course Niel, thanks!!!
2014-07-18 15:30 GMT-05:00 Niel
err, I meant hex in submit_sm and decimal in deliver_sm packets.
2014-07-19 1:04 GMT+04:00 spameden spame...@gmail.com:
It looks like your SMSC operator gives hex number in submit_sm packet and
hex number in deliver_sm, so you need to add this in smsc group
configuration:
msg-id-type =
Thanks your answer Spameden. I thought the same thing, but the message ids
are complete different:
if you see the log:
submit_sm_resp: message_id: 31537685 (decimal)
deliver_sm: ts=613852054 (decimal)
regards,
2014-07-18 16:04 GMT-05:00 spameden spame...@gmail.com:
err, I meant hex
Actually, I've just looked at your logs again:
2014-07-17 12:45:12 [32271] [36] DEBUG: SMPP[SMSC1]: Got PDU:
2014-07-17 12:45:12 [32271] [36] DEBUG: SMPP PDU 0x11f4cb80 dump:
2014-07-17 12:45:12 [32271] [36] DEBUG: type_name: submit_sm_resp
2014-07-17 12:45:12 [32271] [36] DEBUG: command_id:
You're right the message id is in short_message but it should be in
receipted_message_id. It's a bug of the operator, but they told me that
they can't do any change.
That's why I asked to use the timestamp :)
Here is my config (it tried msg-id-type = 2 but didn't work):
#Rx SMSC1
group = smsc
Try commenting out completely msg-id-type if it would be the same means its
something you need to settle down with your SMSC operator.
2014-07-19 2:13 GMT+04:00 Mario Noboa mnobo...@gmail.com:
You're right the message id is in short_message but it should be in
receipted_message_id. It's a bug
Hi,
There are one more question regarding DLR, i.e its not working while sending
ota means not work with
cgi-bin/sendota URL.
Please tell me the solution !!!
Regards,
Bhavya
--
View this message in context:
http://kannel.6189.n7.nabble.com/dlr-mask-not-on-the-url-tp13529p30315.html
Sent
Hi guys,
Can anyone give any hints on how to resolve this problem.
I'm trying to implement a solution but DLR are crucial and don't seem to
work ok.
Is there maybe a way to inject the dlrs directly to SQLBox instead of
sending them to http smsc?
On Thu, Jul 3, 2014 at 2:33 PM,
Hi,Its very much important to me for receiving delivery report while
sending OTA.I have tried with dlr-url and dlr-mask defined with sendsms
url , and its working finebut not working in case of send ota.If
this is a bug then please resolve it as soon as possible. or any other way
What's your dlr-mask?
And this may be an operator specific issue as they might only have allowed
one retry per submit_sm from the ESME hence not allowing any messages from
your end to be buffered.
On Jun 26, 2014 3:32 PM, Michael Stevens michael.stev...@mcmcas.co.za
wrote:
Hi..
OS: Linux
Hi
dlr-url must be an url. why did you declare it as an integer?
should be something like:
...dlr-url=urlencode(http://myhost/mypath/myscript.php?x)...
dlr-url is the url kannel calls for delivering the message status
notifications (dlr)
Regards
Alvaro
Using sqlbox no error, but in smsbox getting error.
i want to update message status in other table map with id(integer) that
why using integer not url.
On Thu, May 22, 2014 at 7:14 AM, Alvaro Cornejo cornejo.alv...@gmail.comwrote:
Hi
dlr-url must be an url. why did you declare it as an
Hi
Then you need to use your own app to do that.
dlr-ulr, by definition --and validated by smsbox-- is an url. that is
why you get the malformed error. An integer in not a url.
What you need to do is create a script you can call by http and pass
your id like
opensmppbox doesn’t trigger any dlr-url’s. You need smsbox for that.
From: users [mailto:users-boun...@kannel.org] On Behalf Of Saurabh Pandey
Sent: woensdag 30 april 2014 8:26
To: users@kannel.org
Subject: DLR-URL debugging
Hi,
I need to debug and check the dlr-url function of Kannel.
Okay, that's odd, because the URL i defined was being fired. May be it was
a mixup. Here is my setup:
SMSC --- Kannel [Bearerbox+smsbox] Sqlbox Opensmppbox ---
smpp client
Now I submit SMS via sendsms cgi to smsbox. Sqlbox is just for logging of
messages sent via opensmppbox. Now
Hi Rene,
I have a very simple question. How do I execute a URL. I have did
everything but if I use Kannel functions (from gwlib/http.h) it results in
panic which I can't seem to trace. I guess I could use libCurl but I don't
want to include anything. When Kannel is already using its functions to
Come on guys, this is not the hardest question ever asked. Is it? Somebody
please assist me!.
Thanks,
Moses
On Wed, Feb 19, 2014 at 12:10 PM, Murgor Bendon bendonmur...@gmail.comwrote:
He is using fakesms, not yet bound to any SMSC provider yet.
Best Regards,
*Bendon Murgor *: Systems
I don't think you'd get any other dlrs from fake smsc. Status 8 is delivered to
smsc, it's as far s you can get there. Try using an smppbox connection (eg
against opensmppbox or an smsc simulator).
--
Alex Guerrieri
On Feb 21, 2014, at 0:39, MOSES KARIUKI kariuk...@gmail.com wrote:
Come on
Hi Guys,
Any help on this request? Please assist.
Moses
On Tue, Feb 18, 2014 at 12:11 PM, MOSES KARIUKI kariuk...@gmail.com wrote:
Hi All,
I have set up Kannel on Ubuntu. I am testing functionality using fakesmsc.
Below is the configuration.
group = core
admin-port = 13000
Consult your SMSC provider. They should sort you out on that. It is not a
kannel issue.
@sotandeka
+256 716 801 124
Senior Programmer in VAS Mobile services, ERP, Health and Web-based Systems.
Experienced Linux System Administrator and Open Source Developer.
On Wed, Feb 19, 2014 at 12:01 PM,
Hi all,
Any one faced this issue before?
Sorry just curious to know .
Thanks,
KRNRDB
On Thursday, January 23, 2014, krnrd b krn...@gmail.com wrote:
Hi all,
I am using kannel 1.5.0 devel version. When i use Tx and Rx separated
while connecting SMSC now problem is when submit_sm happening
Currently the Tx and Rx binds are named RND-1 and RND-1-Rx.
Wouldn't the SMPP binds have to be named the same for the DLR/ID matching to
work?
From: users [mailto:users-boun...@kannel.org] On Behalf Of krnrd b
Sent: 23 January 2014 12:22
To: users
Subject: Re: DLR: received showing 0 in kannel
to be named the same for the DLR/ID matching
to work?
*From:* users [mailto:users-boun...@kannel.org] *On Behalf Of *krnrd b
*Sent:* 23 January 2014 12:22
*To:* users
*Subject:* Re: DLR: received showing 0 in kannel status page
Hi all,
Any one faced this issue before?
Sorry just
renaming your RND-1-Rx bind to RND-1 and see if that works.
*From:* krnrd b [mailto:krn...@gmail.com]
*Sent:* 23 January 2014 15:46
*To:* Ciaran Scolard
*Cc:* users
*Subject:* Re: DLR: received showing 0 in kannel status page
How would I match DLR/ID ?
for Kannel 1.4.3 I use same
.
*From:* krnrd b [mailto:krn...@gmail.com]
*Sent:* 23 January 2014 15:46
*To:* Ciaran Scolard
*Cc:* users
*Subject:* Re: DLR: received showing 0 in kannel status page
How would I match DLR/ID ?
for Kannel 1.4.3 I use same configuration incoming and outgoing shows
properly.
Thanks
*To:* Ciaran Scolard
*Cc:* users
*Subject:* Re: DLR: received showing 0 in kannel status page
How would I match DLR/ID ?
for Kannel 1.4.3 I use same configuration incoming and outgoing shows
properly.
Thanks,
KRNRDB
On Thu, Jan 23, 2014 at 7:22 PM, Ciaran Scolard cia
to have the binds named the same.
Try renaming your RND-1-Rx bind to RND-1 and see if that works.
*From:* krnrd b [mailto:krn...@gmail.com]
*Sent:* 23 January 2014 15:46
*To:* Ciaran Scolard
*Cc:* users
*Subject:* Re: DLR: received showing 0 in kannel status page
How would I match
...@gmail.com]
*Sent:* 23 January 2014 15:46
*To:* Ciaran Scolard
*Cc:* users
*Subject:* Re: DLR: received showing 0 in kannel status page
How would I match DLR/ID ?
for Kannel 1.4.3 I use same configuration incoming and outgoing shows
properly.
Thanks,
KRNRDB
On Thu, Jan 23, 2014 at 7
Probably it does. But only for the first part.
From: users [mailto:users-boun...@kannel.org] On Behalf Of ?-?
Sent: woensdag 27 november 2013 8:05
To: users@kannel.org
Subject: dlr-url don't insert SMS in database if message parts 1
Hello. Sending sms works fine, dlr-url works fine, BUT
Sent: maandag 11 november 2013 13:56
To: خان ابو زید
Cc: kannel users@kannel.org
Subject: Re: DLR NOT UPDATED
Read the user guide about dlr-mask.
1=DLVRD
2=FAILED
4=BUFFERED
8=ACK
16=REJECTED
If you want to get update for DLVRD, FAILED, ACK then it means 1+2+8=11
Willy
Do you see the dlr coming in, in your bearerbox logs?
From: users [mailto:users-boun...@kannel.org] On Behalf Of Rene Kluwen
Sent: dinsdag 12 november 2013 14:58
To: 'Willy Mularto'; 'خان ابو زید'
Cc: users@kannel.org
Subject: RE: DLR NOT UPDATED
Dear Khan,
I just tried your insert
Read the user guide about dlr-mask.
1=DLVRD
2=FAILED
4=BUFFERED
8=ACK
16=REJECTED
If you want to get update for DLVRD, FAILED, ACK then it means 1+2+8=11
Willy Mularto
SMS Gateway, Content Provider, Mobile Solution Specialist
M: +62811923464, +62818923464
PIN BBM: 74924429
On Nov 11,
Hi Alvaro,
As for the error in response to submit_sm is fine. I know the reason. What
i need is a way to read automatically those errors (the status code). Some
of them are for insufficient credit on the line.
My DLR database is empty. In first email on this track i asked about that
issue. I
Hmm lets return to start.
What version of kannel are you using? Try latest SVN if you are using
an outdated version. It is production ready.
Have you compiled kannel with mysql support: ./configure --with-mysql
... ? you need mysql devel libs in order to be able to do this.
If kannel does not
Hi Alvaro,
I tried with all possibles values for msg-id-type, 0x01, 0x02 and 0x03 and
i got the same error.
Thanks
On Wed, Oct 23, 2013 at 9:02 PM, Alvaro Cornejo cornejo.alv...@gmail.comwrote:
Hi Alejandro.
You are getting the dlr, but its id comes in the wrong format
(dec/hex). And
Hi Alejandro
For your submit_sm you are receiving an specific error from your provider:
2013-10-24 15:23:12 [8978] [6] ERROR:
SMPP[SMPP:200.85.32.114:5600/5600:w3:VMA]: SMSC returned error code
0x0424 (Vendor-specific error, please refer to your SMPP provider)
in response to submit_sm.
You
Hi Alvaro,
I tried with dlr-mask=31 and i here is what i get on the logs regarding
dlr, see below:
2013-10-23 18:20:41 [2247] [7] DEBUG: SMPP[SMPP:
200.85.32.114:5600/5600:w3:VMA]: Got PDU:
2013-10-23 18:20:41 [2247] [7] DEBUG: SMPP PDU 0x7fdfac000a70 dump:
2013-10-23 18:20:41 [2247] [7] DEBUG:
Hello Alvaro,
Can you try %26type= instead of type= in the Kannel URL ?
Best Regards,
Le 24 oct. 2013 à 00:18, Alejandro Mussi alemu...@gmail.com a écrit :
Hi Alvaro,
I tried with dlr-mask=31 and i here is what i get on the logs regarding dlr,
see below:
2013-10-23 18:20:41
Hi Alvaro,
Thanks for the response. I am new using kannel and i think i am missing
some info. I also tried sending my own url to the message i submit to
kannel. When a send to sms-service cgi i add these two parameters:
..dlr-url=$dlr_url_encodeddlr-mask=1+2
where $dlr_url_encoded =
Hi Alejandro
dlr-mask indicates which reports you want to receive. According to
that, you add the values for each status and that is what you use.
If you want status 1 and 2 use a value of 3 (1+2). Else try starting
with 31. It does ask for all available status, included intermediates.
Manual
the boxc_id field to your smsbox-id.
== Rene
*From:*Alejandro Guerrieri [mailto:alejandro.guerri...@gmail.com]
*Sent:* dinsdag 13 augustus 2013 18:23
*To:* Rene Kluwen
*Cc:* dorin; users@kannel.org
*Subject:* Re: DLR issue
Also, are you sending to the same phone number? Many carriers have
velocity
@kannel.org
*Subject:* Re: DLR issue
Also, are you sending to the same phone number? Many carriers have
velocity check that would just ignore multiple messages to the same
phone number if sent close together.
Regards,
Alex
On Tue, Aug 13, 2013 at 11:18 AM, Rene Kluwen rene.klu...@chimit.nl
Also, are you sending to the same phone number? Many carriers have velocity
check that would just ignore multiple messages to the same phone number if
sent close together.
Regards,
Alex
On Tue, Aug 13, 2013 at 11:18 AM, Rene Kluwen rene.klu...@chimit.nl wrote:
Check your sent_sms logs.
Do
1 - 100 of 620 matches
Mail list logo