On 07/14/2014 02:17 PM, André Freitas wrote:
Hi to all.
Today i was trying to add a third host to my existing ovirt 3.4 cluster
but i can't because it stays in non-responsive status.
The steps that i did were:
1ª minimal instalation of CentOS 6.5 with SeLinux disabled
2º yum localinstall
Are the official instructions for the setting up the self-hosted
engine applicable to a fresh install (either CentOS or Fedora)?
Basically I am looking to see uf it is possible to basically do an
all-oin-one install but with the engine asca self-hosted VM insread of
on the host itself.
Hi,
I want to add one host to Ovirt Engine...but it's failed with the following
error :-
Host installation failed. Network error during communication with the host.
Engine Log :-
2014-07-15 15:02:54,823 INFO [org.ovirt.engine.core.bll.InstallerMessages]
(VdsDeploy) Installation
Hi,
since the bug 1093366 is evidently blocking the Hosted Engine feature,
it should be added as blocker for the oVirt 3.4.3 tracker (bug 1107968).
All the more so now that the proposed patches seems to have fixed the
problem (I've run at least 30 Hosted Engine migrations without errors).
Hi All,
I am using Ovirt for my QA environment almost 15 virtual servers, and it
is working as expected. The only thing I am worried about is the backup
solutions in case of failure or system crash.
I tried looking into the LVM structure that is created by Ovirt but it
seems a bit complex.
I have removed vdsm and libvirt from that host before the reinstalation
of the host in ovirt engine but the problem persists with s1 respawn:
slave '/usr/share/vdsm/vdsm --pidfile /var/run/vdsm/vdsmd.pid' died too
quickly, respawning slave.
i have put the new log referring to this instalation in
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Am 15.07.2014 11:17, schrieb André Freitas:
I have removed vdsm and libvirt from that host before the
reinstalation of the host in ovirt engine but the problem persists
with s1 respawn: slave '/usr/share/vdsm/vdsm --pidfile
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 2014-07-15 11:36, Sven Kieske wrote:
Am 15.07.2014 11:17, schrieb André Freitas:
I have removed vdsm and libvirt from that host before the
reinstalation of the host in ovirt engine but the problem persists
with s1 respawn: slave
hi,
i have installed the new version indicated in
http://lists.ovirt.org/pipermail/users/2014-July/025979.html an now my
host concludes the installation with sucess.
--
André Freitas
André Freitas
System Network
Administrator | (+351)
234 484 466
ISO 9001 CMMI Level 2
Ubiwhere
Copyright ©
Hi,
I'm trying to move a disk of a virtual machine administration (that is
online) to a different nfs storage, but despite the success of the task
Creating VM Snapshot Auto-generated for Live Storage Migration for VM
administration in the web page of ovirt engine, it doesn't move the
disk to the
Hi All,
I am working on the Nova - oVirt driver as mentioned in the blueprint -
https://blueprints.launchpad.net/nova/+spec/rhev-m-ovirt-clusters-as-compute-resources.
I am currently to integrate neutron with ovirt during a VM launch, for below
use case.
Use Case:-
1. Import the Neutron as
Hi all,
I have a simple question, is iptables if I never plan to use NAT:d guests?
Niklas
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
If you havent already done so, replace your qemu-* packages with the ones
listed at the jekins site
http://jenkins.ovirt.org/job/qemu-kvm-rhev_create-rpms_el6/ws/rpms/
- Original Message -
From: André Freitas afrei...@ubiwhere.com
To: users@ovirt.org
Sent: Tuesday, July 15,
Yes. I did a fresh install on Fedora 19 as a single hosted solution and
it's working well except for an inability to cleanly shut down the system
due to a problem with sanlock leases.
-Bob
On Jul 15, 2014 2:20 AM, Alan Murrell li...@murrell.ca wrote:
Are the official instructions for the
- Original Message -
From: Udaya Kiran P ukiran...@yahoo.in
To: users users@ovirt.org
Sent: Tuesday, July 15, 2014 1:22:15 PM
Subject: [ovirt-users] Neutron - oVirt Integration
Hi All,
I am working on the Nova - oVirt driver as mentioned in the blueprint -
I'm noticing th following error in my vdsm.log file
Thread-124060::WARNING::2014-07-15
09:07:03,329::fileSD::673::scanDomains::(collectMetaFiles) Metadata collection
for domain path /rhev/data-center/mnt/172.16.10.202:_storage timedout
Traceback (most recent call last):
File
When i try to install this packages i get
$ sudo yum localinstall *.rpm
Examining qemu-img-0.12.1.2-2.415.el6_5.10.x86_64.rpm:
2:qemu-img-0.12.1.2-2.415.el6_5.10.x86_64
qemu-img-0.12.1.2-2.415.el6_5.10.x86_64.rpm: does not update installed
package.
Examining
you have to use the rpm command with the --force option
- Original Message -
From: André Freitas afrei...@ubiwhere.com
To: users@ovirt.org
Sent: Tuesday, July 15, 2014 9:13:41 AM
Subject: Re: [ovirt-users] Live Storage migration doesn't work
When i try to install this packages i
Try yum downgrading 'python-pthreading'. I had similar issue
yesterday and seeing others reporting the same.
- Trey
On Tue, Jul 15, 2014 at 2:51 AM, lofyer lof...@gmail.com wrote:
I installed ovirt-3.4.2 on CentOS-6.5 from yum.
While I was trying to add host, I got an error like this:
Host
Yes it can be disabled, but why not just add the rules you need to
make it work properly?
Are you asking about iptables on the host or the guest? Are you
actually using firewalld, or is it really iptables?
You can add a log statement before the reject rule in
/etc/sysconfig/iptables to log a
Thanks. It is on my centos host which is located deep in my NW.
Regards,
Niklas
On 15 jul 2014, at 16:41, White Hat whitehat...@gmail.com wrote:
Yes it can be disabled, but why not just add the rules you need to
make it work properly?
Are you asking about iptables on the host or the
Hi,
after i had successfully migrated the disks to a different nfs
datastore, i now have a vm with 3 snapshots: 1 current with the
description Active VM and 2 more with the description Auto-generated
for Live Storage. For what i have been reading online, i can only
delete snapshots with the vm
On Tue, Jul 15, 2014 at 11:33:16AM +, Niklas Fondberg wrote:
Hi all,
I have a simple question, is iptables if I never plan to use NAT:d guests?
Could you rephrase the question? I, for one, did not underderstand it.
___
Users mailing list
You can modify the IPTablesConfig using engine-config utility to control what
goes into host.
In 3.5.0 you can use the IPTablesConfigSiteCustom in order to push some custom
rules without breaking future upgrades.
- Original Message -
From: Niklas Fondberg nik...@vireone.com
To:
I downloaded python-pthreading-0.1.3-0 and it worked.
Thanks.
于 14-7-15 下午10:02, Trey Dockendorf 写道:
Try yum downgrading 'python-pthreading'. I had similar issue
yesterday and seeing others reporting the same.
- Trey
On Tue, Jul 15, 2014 at 2:51 AM, lofyer lof...@gmail.com wrote:
I
On Tue, Jul 15, 2014 at 09:09:38AM -0400, Maurice James wrote:
I'm noticing th following error in my vdsm.log file
Thread-124060::WARNING::2014-07-15
09:07:03,329::fileSD::673::scanDomains::(collectMetaFiles) Metadata
collection for domain path /rhev/data-center/mnt/172.16.10.202:_storage
On Tue, Jul 15, 2014 at 12:59:34PM -0400, Maurice James wrote:
Yes, how do I clean it. That storage domain is long gone
It seems that the long-gone export is still mounted
on/rhev/data-center/mnt/172.16.10.202:_storage.
Make sure that indeed no process is using it (lsof), and try to umount
it.
Hi all,
i¹ve encountered an issue with snapshots on running VM¹s.
I¹ve searched the forums but can¹t find anything that would be wrong with
my setup.
Environment:
CentOS release 6.5 (Final
Linux dl380.dmz.vireone.com 2.6.32-431.20.3.el6.x86_64 #1 SMP Thu Jun 19
21:14:45 UTC 2014 x86_64 x86_64
It might be a result of running the zfs filesystem on the disks that the
storage domain is using. Any guidance is greatly appreciated.
[root@jmini08 ~]# mount | grep data-pool
data-pool on /data type zfs (rw,xattr)
[root@jmini08 ~]# df -h /data
Filesystem Size Used Avail Use% Mounted on
All,
I have a storage domain that reports having 863G free. The Total Space is
913G. Currently, there are no virtual machines using this storage domain.
When I ssh into the host there is 2.2M on the top level of that mount according
to du. How do I account for and reclaim the mysterious
Does oVirt/RHEV have support for Microsoft Clustering services? Can I run
cluste r members across the RHEV/oVirt cluster?
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
On 15-7-2014 15:19, Maurice James wrote:
you have to use the rpm command with the --force option
yum reinstall will also work.
Joop
___
Users mailing list
Users@ovirt.org
Sorry for almost spamming the list but I sincerely have problemsŠ
Could anyone help me with debugging some lines in my engine.log:
Here they are:
2014-07-15 16:05:43,650 INFO
[org.ovirt.engine.core.bll.storage.DeactivateStorageDomainCommand]
(org.ovirt.thread.pool-6-thread-24) [797b0228] Running
Den 15 jul 2014 22:28 skrev Colby Westerburg cwesterb...@gmail.com:
[root@jmini08 ~]# zfs list -t snapshot
no datasets available
[root@jmini07 ~]# df -h
FilesystemSize Used Avail Use% Mounted on
10.6.2.34:/data 914G 51G 864G 6%
[root@jmini08 ~]# du -hs /data
3.3M/data
--
urthmover
On July 15, 2014 at 3:28:43 PM, Colby Westerburg (cwesterb...@gmail.com) wrote:
[root@jmini08 ~]# zfs list -t snapshot
no datasets available
[root@jmini07 ~]# df -h
Filesystem Size Used Avail Use% Mounted on
10.6.2.34:/data
Oddly a reboot of the host resulted in the space showing up correctly.
[root@jmini08 ~]# df -h /data
Filesystem Size Used Avail Use% Mounted on
data-pool 914G 3.5M 914G 1% /data
[root@jmini08 ~]# du -hs /data
3.3M/data
--
urthmover
On July 15, 2014 at 4:14:51 PM, urthmover
Hi All,
We are waiting for your suggestions or comments on the same. If anyone
knows, please help us to sort out this issue.
--
Regards
Shanil
On Tue, Jul 15, 2014 at 3:55 PM, Shanil S xielessha...@gmail.com wrote:
Hi All,
We want to access vm console by using noVNC and Rest api. We are
37 matches
Mail list logo
