Who was it that has a max and a busa?
.
To unsubscribe go to http://www.sayegh.org/unsubscribe.htm
.
James Dunlap, contact me privately.
Don "Old Man" Smith
.
To unsubscribe go to http://www.sayegh.org/unsubscribe.htm
.
Check out UFO's site www.ufocycles.com
It's a completely different style of carburetor, flatside racing as opposed
to vacuum controlled downdraft.
Lots of hp
Wayne
.
To unsubscribe go to http://www.sayegh.org/unsubscribe.htm
Hi,
Just curious because I am new to this v-max scene, but what is VGAS?
Thanks
Doug
.
To unsubscribe go to http://www.sayegh.org/unsubscribe.htm
.
Hi All,
I have a scoop with some scrapes on the corner and I was wondering where
there is a good place to buy one. Or do you have to buy a set? Or can they
be polished out?
Thanks
Doug
.
To unsubscribe go to http://www.sayegh.org/unsubscribe.htm
Check out http://www.ufocycles.com and/or http://unclefesters.com, both have
descriptions, pics etc.
Steve
http://unclefesters.com
UK(053)VMOA(1466)
- Original Message -
From: [EMAIL PROTECTED]
To: V-MAX TECH LIST [EMAIL PROTECTED]
Sent: Thursday, December 07, 2000 2:15 AM
Subject
Hello Everyone, I have a question about tire wear. When I bought my Max
brand new this past summer it had the factory Bridgestone on the rear. This
tire wore out in three thousand miles!!, not to mention a nasty wobble it
contributed! I decided on the Dunlop K591s as replacements front and
test hope this works
.
To unsubscribe go to http://www.sayegh.org/unsubscribe.htm
.
http://pages.prodigy.net/bradford/
.
To unsubscribe go to http://www.sayegh.org/unsubscribe.htm
.
http://pages.prodigy.net/bradford/
.
To unsubscribe go to http://www.sayegh.org/unsubscribe.htm
.
http://pages.prodigy.net/bradford/
.
To unsubscribe go to http://www.sayegh.org/unsubscribe.htm
.
http://pages.prodigy.net/bradford/
.
To unsubscribe go to http://www.sayegh.org/unsubscribe.htm
.
I removed the y on top of the air box a mo. ago and I can see no
problems
http://pages.prodigy.net/bradford/
.
To unsubscribe go to http://www.sayegh.org/unsubscribe.htm
.
Has anyone raced a busa yet?
http://pages.prodigy.net/bradford/
.
To unsubscribe go to http://www.sayegh.org/unsubscribe.htm
.
I think there is a problem with the list!
http://pages.prodigy.net/Bradford/
.
To unsubscribe go to http://www.sayegh.org/unsubscribe.htm
.
unsubscribed
Tu correo gratis en MixMail http://www.mixmail.com
Crea o sube tu web personal en http://espacio.ya.com
.
To unsubscribe go to http://www.sayegh.org/unsubscribe.htm
.
Thank You, Dracer,got your drawing but no time to install,also get your new
drawing from the Netscape's site post by TC.Thank so much.
-- Original Message -
From: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Monday, October 30, 2000 11:57 PM
Subject: Fwd: (no subject)
hope this helps
Kosy: what is your email ad.
.
To unsubscribe go to http://www.sayegh.org/unsubscribe.htm
.
TC, After going back again and reading past posts about possible popping
through the carbs,i realized this subject has been covered to extreme.
Thanks for all the great posts in the past. they were a big help.anyway, i
went and drilled the brass plugs and found that indeed the settings were
Yo Vgas'rs!!
I have 39 mm FCR Kehin on my Vmax and am having some problems getting the
set up right.
Originally I had 145 mains and 60 pilots. The bike ran fat everywhere. The
plugs were fowled, the exhaust was coated with soot (inside) and the mileage
was half of what is was before. Others
"ô¿ô FlyBoy" wrote:
My Max came with a Vance Hines exhaust system... The VH web site doesn't
list a system for the Max... I don't know if it does anything for
performance, but it looks and sounds better than the stock system on my old
Max... Anyone have any experience with the VH system
Yo Techies!!
Anyone out there done aluminium polishing??
I've been busy lately polishing up some of the aluminium parts but am
looking for a method, tools, etc that does the job easier and better.
Regards
Wayne
**
Wayne H Pettipas
Tel 613-596-9473
Fax
ok here we go. bear with me. ive read the archives but i dont think it
applys. i have a 2000 Max with about three thousand miles on it. at about
400 miles i started to get a little "pop" when i started to take off from a
stop sign after i would blip the throttle at the roll up to the stop
My Max came with a Vance Hines exhaust system... The VH web site doesn't
list a system for the Max... I don't know if it does anything for
performance, but it looks and sounds better than the stock system on my old
Max... Anyone have any experience with the VH system or do I have a
John Wochna contact me privately.
Don "Old Man" Smith
.
To unsubscribe go to http://www.sayegh.org/unsubscribe.htm
.
Great pics and video Dusty!! You forgot to mention there was stereo
V Maxes. I know cuz I was the other one that had to go buy a tire ;).
Robbie
.
To unsubscribe go to http://www.sayegh.org/unsubscribe.htm
There Are also a few digital pics at:
http://www.egroups.com/files/vmax/Biketoberfest+2000/
I'll post the rest when the film comes back and I get them scanned.
Vern Hathaway
Robbie Carstens wrote:
Great pics and video Dusty!! You forgot to mention there was stereo
V Maxes. I know cuz I
ok fellas im scared. i see a lot of negative comments here for dale walker.
im looking at his new exhaust with proposed numbers and am thinking it looks
pretty good. granted, i am new to this list but ive done a lot of archive
reading and feel like im kind of up to date. is ufo really better and
Dusty, What kind of a windshield is that ? Does it effect performance?
Thanks, Bradford
.
To unsubscribe go to http://www.sayegh.org/unsubscribe.htm
.
test
.
To unsubscribe go to http://www.sayegh.org/unsubscribe.htm
.
Something's I send never show up here,does this happen to any else?
.
To unsubscribe go to http://www.sayegh.org/unsubscribe.htm
.
Anyone have Harrys' address in New Orleans? Also I'll be in Tuscaloosa,
AL. Sat. around noon anyone want to meet for lunch.
Don "Old Man" Smith
.
To unsubscribe go to http://www.sayegh.org/unsubscribe.htm
.
I have a tech question about the V-boost on my 2000
max. The Cable coming from the servomotor, is it
supposed to have some slack in it? The V-Boost comes
in at about 7000 rpms. I do not know if I am just
getting use to the V-boot or it's just not opening all
the way up. Any ideas? Thanks Marc
Rick
I ran my bike in 20 degree weather and didn't have any problems... Now
that I have a few more dollars in my motor I am going to winterize it
but normally I wouldn't worry about it unless it consistently goes below
zero...
P.S. I'm in Denver take care Phil
Question?
I live in Illinois and have a heated attached garage. I am considering
running my Max all year and plan to take a weekly ride regardless of the
weather , except for snow covered streets of course. My 2000 max is stock
from the factory (except supertrapps) , what is the usual
First winter I had my bike it had to be kept OUTSIDE... I used it (almost)
every day kept it clean covered etc.. never had a problem with freezing
fluids (just decaying alloy). Didn't having 'freezing' days in the UK
compared to the those in the States/Canada, but there were definitely times
Does anyone clearcoat after polishing parts? If so with what?
.
To unsubscribe go to http://www.sayegh.org/unsubscribe.htm
.
my vmax is 95 model with 43,000 miles
[EMAIL PROTECTED] wrote:
You should of stated your year and mileage.
But probably it's the COMMON starter clutch problem.
The 3 bolts holding it come loose.
The hardest part is removing the fly wheel.
Check the FAQ at the tech site for this procedure.
Has any one found a better headlight?
BRADFORD
How much fork oil does a 92 max
hold?
Can anyone tell me if there's a difference between
the '96 and '97 Vmaxs forthe rear brake calliper hanger - the alloy bracket
to which the rear brakecalliper is bolted. The Ohlins YA5131
shocks I bought do not fit my Vmax because the right handone fouls the top
mounting bolt of the rear
.Any body know how to remove the chrome bar ends on my max 92
BRADFORD...
.
To unsubscribe go to http://www.sayegh.org/unsubscribe.htm
.
Yo Techies:
I've been trying, unsuccessfully for some time now to contact the
"virtualcyclemall", have requested ID and Password also several times but
Nada!!
They have some interesting rear sets that I'm interested in but can't seem
to contact them.
Anybody know if they are still alive?? Or
Yo Tech list:
I have 17" radials(GSXR rims) on my Vmax and need a new set of shoes soon.
I've looked at various suggestions and am totally confused, my normal state.
I'm focussed at the moment on the Michelin Pilot Sports, suggested by "The
Interactive Motorcycle"
Paul:
For the past few weeks I have been getting my tech list as a compilation of
messages. Is this the new format or do I have a choice. I kind of like the
old format.
Regards
Wayne
Wayne H Pettipas
Tel 613-596-9473
Fax 613-596-9969
E [EMAIL PROTECTED]
VMOA--#1266
questions on odessey battery. what model # did you use?
how much did it cost? are they as good as they claim?
thanks
laz vmoa 770
On Wed, 23 August 2000, [EMAIL PROTECTED] wrote:
I placed the odessey in my 99. Have been very pleased with it. Then again I have
only had it for 3 months.
To All:
I am going to replace the plugs and would like some suggestions on which
ones are better or best??
Regards
Wayne
Wayne H Pettipas
Tel 613-596-9473
Fax 613-596-9969
E [EMAIL PROTECTED]
VMOA--#1266
winmail.dat
Anyone have any experience w/ v-gas carbs by UFO??
Need some info
I was thing about this setup on my
max. Any pros or cons???
__
Do You Yahoo!?
Kick off your party with Yahoo! Invites.
http://invites.yahoo.com/
Hi guys I`m wanting to improve the braking on my
96 V-max ...what improvements can i do to the standard brakes what other
calipers are suitable to the max without to much hassle bolt straight on
when sliding the fork tubes up the clamps whats the ideal length for best
Tyler I live in fenelon falls, you answered my boost adjustment
question a few weeks ago. leaving tomorrow morning ,should be there late
afternoon . driving a white dodge van.
see you there Bob
Wilson
VMOA #
To the Tech list:
I am going to install a bar end cruise control. How does one get the stock
ends off w/o destroying anything??
Regards
Wayne
Wayne H Pettipas
Tel 613-596-9473
Fax 613-596-9969
E [EMAIL PROTECTED]
VMOA--#1266
winmail.dat
Original message
hello i am changing my front tyre soon
currently i am using metzeller 110/80 ZR18 meZ2 laser MBS-radial which last only 3500
miles
which other tyres do your recommend?
my rear tyre is metzeller150/90 B15 ML2 plus
i got a few choices in mind
they are:
Original message
Original message
hello i am changing my front tyre soon
currently i am using metzeller 110/80 ZR18 meZ2 laser MBS-radial which last only 3500
miles
which other tyres do your recommend?
my rear tyre is metzeller150/90 B15 ML2 plus
i got a few
TED]
Reply-To: [EMAIL PROTECTED]
To: V-MAX TECH LIST [EMAIL PROTECTED]
Subject: Subject: which front tyre?
Date: Tue, 18 Jul 2000 16:56:10 -0400
Marcus, the stock front rim is really to narrow for a 120 or 130 tire, my
self I would recommend the following.
Avon super venom
Yo Vmax'rs:
I'm considering installing a set of the new Progressive 440 rear shocks as
part of lowering max by 2". Anyone have any experience with these new
shocks. Progressive claims great things but then they are new and perhaps
there is no one to dispute the claims. My other choice is the
214 messages of BS, give me a break!
Don "Old Man" Smith
.
To unsubscribe go to http://www.sayegh.org/unsubscribe.htm
.
i have a 93 max that seems to wear out front tires very quickly. i use
high quality tires (pirelli, metzler, dunlop) but they all start to
"cup" after about 4k miles. the front end has progressive springs,
furber fix, fork brace and new wheel bearings. I'm aware that all
front bike tires will
Laszlo,
What air pressure are you running ??? I would suggest 40+ psi and avoid heavy
breaking with the front break at low speeds..this works for me.
-- Original Text --
From: "Laszlo Hobausz" [EMAIL PROTECTED], on 7/6/00 11:35 AM:
i have a 93 max that seems to wear out front
Question about stock air filter in non modified max I read about dyno test
with stock filter and KN filter they said the bike ran a little better with
the stock than KN they also said some other bikes ran better with stock
filter are air boxes that chritical in design . would I be wrong to
I just installed some smaller turn signals on the max. Yep, you guessed it,
now they flash very fast. I know it is related to the load on the flasher
but I'm now sure how to cure the problem. Any suggestions besides removing
them?
Ivan Wallace
VMOA#561
1997 Vmax
1998 S3T Buell
2000 Bandit 1200
To the tech list:
I want to remove the centre stand for a mod I have been considering.
How does one get it off??
Is there a potential problem with the spring??
If my mod works I'll post it.
Regards
Wayne
Wayne H Pettipas
Tel 613-596-9473
Fax 613-596-9969
E [EMAIL PROTECTED]
VMOA--#1266
Wayne remove the two bolts, one on each side. You can get the spring off
easier then.
Don "Old Man" Smith
.
To unsubscribe go to http://www.sayegh.org/unsubscribe.htm
.
Test
Ivan Wallace
VMOA#561
1997 Vmax
1998 S3T Buell
.
To unsubscribe go to http://www.sayegh.org/unsubscribe.htm
.
Robbie Carstens contact me.
Don "Old Man" Smith
.
To unsubscribe go to http://www.sayegh.org/unsubscribe.htm
.
Hello out there in Vmax land:
I am in the middle of replacing my rear brake pads and have what I hope is a
minor problem.
Both cylinders were out different amounts when I removed the old pads.
One pad the right side compressed back into the body fairly easily using a
small clamp. However the
Just got back from a trip ( on my max ) from Gainesville,Fl to Birmingham,Al
to go to the Barber vintage motorcycle museum. If you EVER get a chance to
go there do not miss it. Bikes from the early 1900's to 1999. Yes they do
have a Vmax. It is not there right now, it is on tour. The museum has 7
David Bailey contact me .
Don "Old Man" Smith
.
To unsubscribe go to http://www.sayegh.org/unsubscribe.htm
.
Agreed! Nothing better than "Eyes Wide Shut" while "Wide F@ck'n Open" :)
Ok, Bringing this back on topic - realizing Paul must be away for the
week...
Anyone with the Magnesium Dymags know if it's possible to change the color?
I'm looking at a used 17"/5" rear Vmax Dymag (shaft drive), only
Cory, powder coated. What color do you want?
Don "Old Man" Smith
.
To unsubscribe go to http://www.sayegh.org/unsubscribe.htm
.
cory was was told by dymag that powder coating can
be done but i wonder how well the bearing
components would hold up
d
Cory Frost wrote:
Agreed! Nothing better than "Eyes Wide Shut" while "Wide F@ck'n Open" :)
Ok, Bringing this back on topic - realizing Paul must be away for
I would probably remove bearings and replace them after powdercoating...
I've not gotten a real official answer from superbike racing yet
Cory
cory was was told by dymag that powder coating can
be done but i wonder how well the bearing
components would hold up
d
Cory Frost
Robert call me.
Don "Old Man" Smith
.
To unsubscribe go to http://www.sayegh.org/unsubscribe.htm
.
It is very irritating to open 30 e-mails about a Cybermax Fairing and 28 of
them have nothing to do with that subject. It takes 1 second to change the
subject! Remember these are e-mails, its not a chat room.
Kurt 00 Max
.
To unsubscribe go to http
[EMAIL PROTECTED] wrote:
It is very irritating to open 30 e-mails about a Cybermax Fairing and 28 of
them have nothing to do with that subject. It takes 1 second to change the
subject! Remember these are e-mails, its not a chat room.
Kurt 00 Max
On the link below is a picture I copied from Ingo's site. I'm curious if
anyone knows if the front headlight scheme is a package that one can buy
somewhere, or if the owner did it from scratch?
http://www.users.uswest.net/~rjeff2/
Jeff Rice
1998 V-Max
V.M.O.A. #993
[EMAIL PROTECTED]
Jeff, seen it some where, but don't remember where. I think he built it
himself, maybe Mario remembers.
Don "Old Man" Smith
.
To unsubscribe go to http://www.sayegh.org/unsubscribe.htm
.
I have 99 Max and would like the to have Black wheels can I paint or powercoat mine?
or will it effect balance ect. might also be willing to trade to someone who wants
aluminum, also what years had the black wheels.
thanks for any help and please excuse my lake of knowledge
JBX
99 MAX
also what years had the black wheels.
I think, the '96 and '97 had black wheels.
Mark
VMOA #491
'90 Vmax
'98 CBR1100XX
.
To unsubscribe go to http://www.sayegh.org/unsubscribe.htm
.
-MAX TECH LIST [EMAIL PROTECTED]
Sent: Wednesday, May 03, 2000 2:32 AM
Subject: gsxr-400r front end??
hello i hav a set of gsxr-400r usd front end with wheels and brake
calipers.
can it be used on thw vmax?
if yes could anyone pls teach me how to fix on the bike
thanks
marcus
ax.
Bryan - VMOA #706
http://test.militarypals.com/eden/
- Original Message -
From: marcus chong [EMAIL PROTECTED]
To: V-MAX TECH LIST [EMAIL PROTECTED]
Sent: Thursday, May 04, 2000 3:53 AM
Subject: Re: Subject: Re: gsxr-400r front end??
but the front fork travel is not long enough
Paul Smith contact me.
Don "Old Man" Smith
.
To unsubscribe go to http://www.sayegh.org/unsubscribe.htm
.
Paul Smth I need a correct mailing address.
Don "Old Man" Smith
.
To unsubscribe go to http://www.sayegh.org/unsubscribe.htm
.
TC
The bike is completly stock, and all plugs are getting fouled.
Is this on all the plugs ?? What has been done to this bike ... a jet
kit ... slide washers ... anything ...
*
iWon.comwww.iwon.comwhy wouldn't you?
Hola Mario, te mando este E-Mail ya que hace tiempo encontre en una web
una empresa que vendian basculantes monobrazo con cadena corona y piñon
preparados para V-MAX, y ahora no me acuerdo donde.
Si tru sabes donde conseguir esta pieza dimelo
P.S.
Ya he recibido el KIT NOS de MAD MAX ahora
Does any of you list members happen to have the phone number for Rocky
Mountain Sportmax. I have tried to Email them twice in the last week, but it
gets rejected saying the mailbox is full.
Thanks in advance,
Doug Lowry
.
To unsubscribe go to
Furbur is on his way back to Denver... he's somewhere between Pittsburgh,
PA and Columbus, OH... try his phone number...
It's listed on his website...
Dan Cox(Voodoo Max)
Newark, OH
VMOA# 384
93 VMAX
.
To unsubscribe go to
Thanks for your help guys. I'll give him a call later in the week.
.
To unsubscribe go to http://www.sayegh.org/unsubscribe.htm
.
YA ES VERANO.
WWW.MILISA.COM
V-Max gas. 85 v-max owners manual and orginal shop manual says use regular
fuel epa sticker under the air box metal box cover says use regular (leaded)
fuel 91 octane (91) min..what's up
.
To unsubscribe go to
90 matches
Mail list logo
