Re: [Vala] [Genie] Build for windows under linux. Using minwg.
OK, I'm probably too kind of a man ^^, Please try this : http://www.tarnyko.net/repo/clutter-gtk-1.15.2_BUNDLE.zip Do the following : save your whole Vala installation folder (the one containing bin, include, etc..) to another folder. Then from the zip archive, successively copy and overwrite to this folder the contents of these folders : - glib-2.40.0 - clutter-1.16.4 - clutter-gtk-1.15.2 I've tried it, it works on the surface, but not sure it is perfectly stable. Regards, Tarnyko Tarnyko writes: Hi again, Yes, I read the message and the response you got from Emmanuele (I subscribed to clutter-list, too ;-)). I think Clutter 1.2 may be using the XEmbed protocol behing the scenes ; hence why it only works on X11. So, it will be cool to upgrade clutter in ValaWinPKG. But Tarnyko is always busy :-. Me, updating anything in the Vala/GNOME win32 stack ? Whooops... I'd like to say I will do it, but failed miserably at past promises. My personal situation is very different today than when I released all this stuff. Buy ok, I promise you I will at least take a look at it. Regards, Tarnyko gontzal writes: I have recived a message from Emmanuel Bassi, and says... if you update to Clutter ≥ 1.5.2 (or current master) then embedding *should* work on non-X11 platforms, but it hasn't been thoroughly tested yet. ciao, Emmanuele. So, it will be cool to upgrade clutter in ValaWinPKG. But Tarnyko is always busy :-. Gontzal. or., 2014.eko iraren 19a 12:58(e)an, Tarnyko igorleak idatzi zuen: Hi gontzal, Tried to use the procedure from : http://www.tarnyko.net/en/?q=node/37 ? gontzal writes: OK. But... is not easy to find the gstreamer bundle for windows and the gtk-clutter bundle. Any body knows about them? Thanks. I will try it. Gontzal. ig., 2014.eko iraren 14a 20:22(e)an, Daniel Espinosa igorleak idatzi zuen: I can help you. You can see at GXml project in git.gnome.org http://git.gnome.org. I've managed to build it under windows with no problems. Just download GTK+ for windows bundle and use see to change prefix variable I'm all PC files to point to the Dir you uncompress this bundle. You must install mingw-w64 on your distribution. Then on terminal set PKG_CONFIG_PATH to pont the directory you uncompress gtk+ bundle and add to the path lib/pkgconfig directory; this is very important, if you don't set correctly, pkg-config will find PC files from your Linux Installation and you compilation will fail with lot errors on headers. When configure your software, use --host= to the platform you want to use, 32 or 64 bits. On Ubuntu you must use x86_64-w64-mingw32 for 64 bits and i686-w64-mingw32, if you get lot of errors from included headers then the above host targets are wrong. If most module use gobject introspection, you must disable because bundle doesn't include it. As you can see on GXml, I've use valac to get C code then use the mingw-w64 compiler to compile it to get exe and DLLs. C code must depend on a rule that use valac to get it. But be this is not required, may you want to use valac directly, in theory it must use mingw-w64 compiler because the host setting. El sep 14, 2014 8:29 AM, Gontzal Uriarte txasato...@gmail.com mailto:txasato...@gmail.com escribió: Hi!! I have finished a Katamotz Ejercicios new application for reading learning and teaching. Is a Genie application and it uses gtk-3, pango, cogl, clutter, clutter-gtk and gstreamer. No problems for building under linux for linux, but how do it for Windows. I have seen some tutorials from Tarnyko and others but... there is anyone for help me? Thanks. Txasatonga. ___ vala-list mailing list vala-list@gnome.org mailto:vala-list@gnome.org https://mail.gnome.org/mailman/listinfo/vala-list ___ vala-list mailing list vala-list@gnome.org https://mail.gnome.org/mailman/listinfo/vala-list ___ vala-list mailing list vala-list@gnome.org https://mail.gnome.org/mailman/listinfo/vala-list ___ vala-list mailing list vala-list@gnome.org https://mail.gnome.org/mailman/listinfo/vala-list ___ vala-list mailing list vala-list@gnome.org https://mail.gnome.org/mailman/listinfo/vala-list
Re: [Vala] [Genie] Build for windows under linux. Using minwg.
Hi gontzal, Tried to use the procedure from : http://www.tarnyko.net/en/?q=node/37 ? gontzal writes: OK. But... is not easy to find the gstreamer bundle for windows and the gtk-clutter bundle. Any body knows about them? Thanks. I will try it. Gontzal. ig., 2014.eko iraren 14a 20:22(e)an, Daniel Espinosa igorleak idatzi zuen: I can help you. You can see at GXml project in git.gnome.org http://git.gnome.org. I've managed to build it under windows with no problems. Just download GTK+ for windows bundle and use see to change prefix variable I'm all PC files to point to the Dir you uncompress this bundle. You must install mingw-w64 on your distribution. Then on terminal set PKG_CONFIG_PATH to pont the directory you uncompress gtk+ bundle and add to the path lib/pkgconfig directory; this is very important, if you don't set correctly, pkg-config will find PC files from your Linux Installation and you compilation will fail with lot errors on headers. When configure your software, use --host= to the platform you want to use, 32 or 64 bits. On Ubuntu you must use x86_64-w64-mingw32 for 64 bits and i686-w64-mingw32, if you get lot of errors from included headers then the above host targets are wrong. If most module use gobject introspection, you must disable because bundle doesn't include it. As you can see on GXml, I've use valac to get C code then use the mingw-w64 compiler to compile it to get exe and DLLs. C code must depend on a rule that use valac to get it. But be this is not required, may you want to use valac directly, in theory it must use mingw-w64 compiler because the host setting. El sep 14, 2014 8:29 AM, Gontzal Uriarte txasato...@gmail.com mailto:txasato...@gmail.com escribió: Hi!! I have finished a Katamotz Ejercicios new application for reading learning and teaching. Is a Genie application and it uses gtk-3, pango, cogl, clutter, clutter-gtk and gstreamer. No problems for building under linux for linux, but how do it for Windows. I have seen some tutorials from Tarnyko and others but... there is anyone for help me? Thanks. Txasatonga. ___ vala-list mailing list vala-list@gnome.org mailto:vala-list@gnome.org https://mail.gnome.org/mailman/listinfo/vala-list ___ vala-list mailing list vala-list@gnome.org https://mail.gnome.org/mailman/listinfo/vala-list ___ vala-list mailing list vala-list@gnome.org https://mail.gnome.org/mailman/listinfo/vala-list
Re: [Vala] [Genie] Build for windows under linux. Using minwg.
Yes, ok!!! I have tried cross compiling from linux but i think is very difficult for me. I dont understand so much the mecanism of compilers, sorry. Certanly i wan't use windows but. I have tried the tools of tarnyko in windows and is moor easy building in situ. Thanks Tarnyko, your tools are so usefull!!! I'm teacher and almost all computers in the schools uses Windows. I dont like this, but is the reality. Now i'm trying to solve some errors with gtk-clutter in windows... I will anounce you if I finish. Thanks. or., 2014.eko iraren 19a 12:58(e)an, Tarnyko igorleak idatzi zuen: Hi gontzal, Tried to use the procedure from : http://www.tarnyko.net/en/?q=node/37 ? gontzal writes: OK. But... is not easy to find the gstreamer bundle for windows and the gtk-clutter bundle. Any body knows about them? Thanks. I will try it. Gontzal. ig., 2014.eko iraren 14a 20:22(e)an, Daniel Espinosa igorleak idatzi zuen: I can help you. You can see at GXml project in git.gnome.org http://git.gnome.org. I've managed to build it under windows with no problems. Just download GTK+ for windows bundle and use see to change prefix variable I'm all PC files to point to the Dir you uncompress this bundle. You must install mingw-w64 on your distribution. Then on terminal set PKG_CONFIG_PATH to pont the directory you uncompress gtk+ bundle and add to the path lib/pkgconfig directory; this is very important, if you don't set correctly, pkg-config will find PC files from your Linux Installation and you compilation will fail with lot errors on headers. When configure your software, use --host= to the platform you want to use, 32 or 64 bits. On Ubuntu you must use x86_64-w64-mingw32 for 64 bits and i686-w64-mingw32, if you get lot of errors from included headers then the above host targets are wrong. If most module use gobject introspection, you must disable because bundle doesn't include it. As you can see on GXml, I've use valac to get C code then use the mingw-w64 compiler to compile it to get exe and DLLs. C code must depend on a rule that use valac to get it. But be this is not required, may you want to use valac directly, in theory it must use mingw-w64 compiler because the host setting. El sep 14, 2014 8:29 AM, Gontzal Uriarte txasato...@gmail.com mailto:txasato...@gmail.com escribió: Hi!! I have finished a Katamotz Ejercicios new application for reading learning and teaching. Is a Genie application and it uses gtk-3, pango, cogl, clutter, clutter-gtk and gstreamer. No problems for building under linux for linux, but how do it for Windows. I have seen some tutorials from Tarnyko and others but... there is anyone for help me? Thanks. Txasatonga. ___ vala-list mailing list vala-list@gnome.org mailto:vala-list@gnome.org https://mail.gnome.org/mailman/listinfo/vala-list ___ vala-list mailing list vala-list@gnome.org https://mail.gnome.org/mailman/listinfo/vala-list ___ vala-list mailing list vala-list@gnome.org https://mail.gnome.org/mailman/listinfo/vala-list
Re: [Vala] [Genie] Build for windows under linux. Using minwg.
I have a little problem with gtk-clutter. Version: 1.2 of Tarnyko's ValaWinPKG tool In windows says me: (clutter1.exe:2564): Clutter-Gtk-CRITICAL **: Embedding GtkWidget inside Clutter Actor through GtkClutterActor does not yet work on non-X11 platforms. when I code this: uses Gtk; uses Clutter; uses GtkClutter; window: Gtk.Window embed: GtkClutter.Embed ; stage: Clutter.Actor actorx:Clutter.Actor init if (GtkClutter.init(ref args) != Clutter.InitError.SUCCESS) GLib.warning(Could not initialize GtkClutter) else window = new Gtk.Window(); window.title = Katamotz Clutter; embed = new GtkClutter.Embed(); var box= new Gtk.Box(Gtk.Orientation.HORIZONTAL, 5) box.add(embed) stage = embed.get_stage(); var boton = new Gtk.Button.with_label(Ejercicio 1); var actorx = new GtkClutter.Actor.with_contents(boton); actorx.set_reactive(true) actorx.set_x(100) actorx.set_y(100) stage.add_child(actorx) window.add(box) window.set_default_size(600, 600); window.show_all(); Gtk.main(); Anyon knows the reason of the error? Maybe the version? This code goes well on linux... Thanks. or., 2014.eko iraren 19a 12:58(e)an, Tarnyko igorleak idatzi zuen: Hi gontzal, Tried to use the procedure from : http://www.tarnyko.net/en/?q=node/37 ? gontzal writes: OK. But... is not easy to find the gstreamer bundle for windows and the gtk-clutter bundle. Any body knows about them? Thanks. I will try it. Gontzal. ig., 2014.eko iraren 14a 20:22(e)an, Daniel Espinosa igorleak idatzi zuen: I can help you. You can see at GXml project in git.gnome.org http://git.gnome.org. I've managed to build it under windows with no problems. Just download GTK+ for windows bundle and use see to change prefix variable I'm all PC files to point to the Dir you uncompress this bundle. You must install mingw-w64 on your distribution. Then on terminal set PKG_CONFIG_PATH to pont the directory you uncompress gtk+ bundle and add to the path lib/pkgconfig directory; this is very important, if you don't set correctly, pkg-config will find PC files from your Linux Installation and you compilation will fail with lot errors on headers. When configure your software, use --host= to the platform you want to use, 32 or 64 bits. On Ubuntu you must use x86_64-w64-mingw32 for 64 bits and i686-w64-mingw32, if you get lot of errors from included headers then the above host targets are wrong. If most module use gobject introspection, you must disable because bundle doesn't include it. As you can see on GXml, I've use valac to get C code then use the mingw-w64 compiler to compile it to get exe and DLLs. C code must depend on a rule that use valac to get it. But be this is not required, may you want to use valac directly, in theory it must use mingw-w64 compiler because the host setting. El sep 14, 2014 8:29 AM, Gontzal Uriarte txasato...@gmail.com mailto:txasato...@gmail.com escribió: Hi!! I have finished a Katamotz Ejercicios new application for reading learning and teaching. Is a Genie application and it uses gtk-3, pango, cogl, clutter, clutter-gtk and gstreamer. No problems for building under linux for linux, but how do it for Windows. I have seen some tutorials from Tarnyko and others but... there is anyone for help me? Thanks. Txasatonga. ___ vala-list mailing list vala-list@gnome.org mailto:vala-list@gnome.org https://mail.gnome.org/mailman/listinfo/vala-list ___ vala-list mailing list vala-list@gnome.org https://mail.gnome.org/mailman/listinfo/vala-list ___ vala-list mailing list vala-list@gnome.org https://mail.gnome.org/mailman/listinfo/vala-list
Re: [Vala] [Genie] Build for windows under linux. Using minwg.
I have a little problem with gtk-clutter. Version: 1.2 of Tarnyko's ValaWinPKG tool In windows says me: (clutter1.exe:2564): Clutter-Gtk-CRITICAL **: Embedding GtkWidget inside Clutter Actor through GtkClutterActor does not yet work on non-X11 platforms. when I code this: uses Gtk; uses Clutter; uses GtkClutter; window: Gtk.Window embed: GtkClutter.Embed ; stage: Clutter.Actor actorx:Clutter.Actor init if (GtkClutter.init(ref args) != Clutter.InitError.SUCCESS) GLib.warning(Could not initialize GtkClutter) else window = new Gtk.Window(); window.title = Katamotz Clutter; embed = new GtkClutter.Embed(); var box= new Gtk.Box(Gtk.Orientation.HORIZONTAL, 5) box.add(embed) stage = embed.get_stage(); var boton = new Gtk.Button.with_label(Ejercicio 1); var actorx = new GtkClutter.Actor.with_contents(boton); actorx.set_reactive(true) actorx.set_x(100) actorx.set_y(100) stage.add_child(actorx) window.add(box) window.set_default_size(600, 600); window.show_all(); Gtk.main(); Anyone knows the reason of the error? Maybe the version? This code goes well on linux... Thanks. or., 2014.eko iraren 19a 12:58(e)an, Tarnyko igorleak idatzi zuen: Hi gontzal, Tried to use the procedure from : http://www.tarnyko.net/en/?q=node/37 ? gontzal writes: OK. But... is not easy to find the gstreamer bundle for windows and the gtk-clutter bundle. Any body knows about them? Thanks. I will try it. Gontzal. ig., 2014.eko iraren 14a 20:22(e)an, Daniel Espinosa igorleak idatzi zuen: I can help you. You can see at GXml project in git.gnome.org http://git.gnome.org. I've managed to build it under windows with no problems. Just download GTK+ for windows bundle and use see to change prefix variable I'm all PC files to point to the Dir you uncompress this bundle. You must install mingw-w64 on your distribution. Then on terminal set PKG_CONFIG_PATH to pont the directory you uncompress gtk+ bundle and add to the path lib/pkgconfig directory; this is very important, if you don't set correctly, pkg-config will find PC files from your Linux Installation and you compilation will fail with lot errors on headers. When configure your software, use --host= to the platform you want to use, 32 or 64 bits. On Ubuntu you must use x86_64-w64-mingw32 for 64 bits and i686-w64-mingw32, if you get lot of errors from included headers then the above host targets are wrong. If most module use gobject introspection, you must disable because bundle doesn't include it. As you can see on GXml, I've use valac to get C code then use the mingw-w64 compiler to compile it to get exe and DLLs. C code must depend on a rule that use valac to get it. But be this is not required, may you want to use valac directly, in theory it must use mingw-w64 compiler because the host setting. El sep 14, 2014 8:29 AM, Gontzal Uriarte txasato...@gmail.com mailto:txasato...@gmail.com escribió: Hi!! I have finished a Katamotz Ejercicios new application for reading learning and teaching. Is a Genie application and it uses gtk-3, pango, cogl, clutter, clutter-gtk and gstreamer. No problems for building under linux for linux, but how do it for Windows. I have seen some tutorials from Tarnyko and others but... there is anyone for help me? Thanks. Txasatonga. ___ vala-list mailing list vala-list@gnome.org mailto:vala-list@gnome.org https://mail.gnome.org/mailman/listinfo/vala-list ___ vala-list mailing list vala-list@gnome.org https://mail.gnome.org/mailman/listinfo/vala-list ___ vala-list mailing list vala-list@gnome.org https://mail.gnome.org/mailman/listinfo/vala-list
Re: [Vala] [Genie] Build for windows under linux. Using minwg.
I have recived a message from Emmanuel Bassi, and says... if you update to Clutter ≥ 1.5.2 (or current master) then embedding *should* work on non-X11 platforms, but it hasn't been thoroughly tested yet. ciao, Emmanuele. So, it will be cool to upgrade clutter in ValaWinPKG. But Tarnyko is always busy :-. Gontzal. or., 2014.eko iraren 19a 12:58(e)an, Tarnyko igorleak idatzi zuen: Hi gontzal, Tried to use the procedure from : http://www.tarnyko.net/en/?q=node/37 ? gontzal writes: OK. But... is not easy to find the gstreamer bundle for windows and the gtk-clutter bundle. Any body knows about them? Thanks. I will try it. Gontzal. ig., 2014.eko iraren 14a 20:22(e)an, Daniel Espinosa igorleak idatzi zuen: I can help you. You can see at GXml project in git.gnome.org http://git.gnome.org. I've managed to build it under windows with no problems. Just download GTK+ for windows bundle and use see to change prefix variable I'm all PC files to point to the Dir you uncompress this bundle. You must install mingw-w64 on your distribution. Then on terminal set PKG_CONFIG_PATH to pont the directory you uncompress gtk+ bundle and add to the path lib/pkgconfig directory; this is very important, if you don't set correctly, pkg-config will find PC files from your Linux Installation and you compilation will fail with lot errors on headers. When configure your software, use --host= to the platform you want to use, 32 or 64 bits. On Ubuntu you must use x86_64-w64-mingw32 for 64 bits and i686-w64-mingw32, if you get lot of errors from included headers then the above host targets are wrong. If most module use gobject introspection, you must disable because bundle doesn't include it. As you can see on GXml, I've use valac to get C code then use the mingw-w64 compiler to compile it to get exe and DLLs. C code must depend on a rule that use valac to get it. But be this is not required, may you want to use valac directly, in theory it must use mingw-w64 compiler because the host setting. El sep 14, 2014 8:29 AM, Gontzal Uriarte txasato...@gmail.com mailto:txasato...@gmail.com escribió: Hi!! I have finished a Katamotz Ejercicios new application for reading learning and teaching. Is a Genie application and it uses gtk-3, pango, cogl, clutter, clutter-gtk and gstreamer. No problems for building under linux for linux, but how do it for Windows. I have seen some tutorials from Tarnyko and others but... there is anyone for help me? Thanks. Txasatonga. ___ vala-list mailing list vala-list@gnome.org mailto:vala-list@gnome.org https://mail.gnome.org/mailman/listinfo/vala-list ___ vala-list mailing list vala-list@gnome.org https://mail.gnome.org/mailman/listinfo/vala-list ___ vala-list mailing list vala-list@gnome.org https://mail.gnome.org/mailman/listinfo/vala-list
Re: [Vala] [Genie] Build for windows under linux. Using minwg.
Hi Gontzal, You are welcome. Cross-compiling has always been an hassle, regardless of the language and framework ; I personally consider it is not worth it if you are not dealing with a very large application needing continuous integration. Anyway, you may already be familiar with some posts I wrote on the subject : http://www.tarnyko.net/en/?q=node/15 This should get the basics working, though the complexity rapidly explodes with any library you add. Especially GStreamer, which involves lots of modules and plugins installed in specific locations. Regards, Tarnyko gontzal writes: Yes, ok!!! I have tried cross compiling from linux but i think is very difficult for me. I dont understand so much the mecanism of compilers, sorry. Certanly i wan't use windows but. I have tried the tools of tarnyko in windows and is moor easy building in situ. Thanks Tarnyko, your tools are so usefull!!! I'm teacher and almost all computers in the schools uses Windows. I dont like this, but is the reality. Now i'm trying to solve some errors with gtk-clutter in windows... I will anounce you if I finish. Thanks. or., 2014.eko iraren 19a 12:58(e)an, Tarnyko igorleak idatzi zuen: Hi gontzal, Tried to use the procedure from : http://www.tarnyko.net/en/?q=node/37 ? gontzal writes: OK. But... is not easy to find the gstreamer bundle for windows and the gtk-clutter bundle. Any body knows about them? Thanks. I will try it. Gontzal. ig., 2014.eko iraren 14a 20:22(e)an, Daniel Espinosa igorleak idatzi zuen: I can help you. You can see at GXml project in git.gnome.org http://git.gnome.org. I've managed to build it under windows with no problems. Just download GTK+ for windows bundle and use see to change prefix variable I'm all PC files to point to the Dir you uncompress this bundle. You must install mingw-w64 on your distribution. Then on terminal set PKG_CONFIG_PATH to pont the directory you uncompress gtk+ bundle and add to the path lib/pkgconfig directory; this is very important, if you don't set correctly, pkg-config will find PC files from your Linux Installation and you compilation will fail with lot errors on headers. When configure your software, use --host= to the platform you want to use, 32 or 64 bits. On Ubuntu you must use x86_64-w64-mingw32 for 64 bits and i686-w64-mingw32, if you get lot of errors from included headers then the above host targets are wrong. If most module use gobject introspection, you must disable because bundle doesn't include it. As you can see on GXml, I've use valac to get C code then use the mingw-w64 compiler to compile it to get exe and DLLs. C code must depend on a rule that use valac to get it. But be this is not required, may you want to use valac directly, in theory it must use mingw-w64 compiler because the host setting. El sep 14, 2014 8:29 AM, Gontzal Uriarte txasato...@gmail.com mailto:txasato...@gmail.com escribió: Hi!! I have finished a Katamotz Ejercicios new application for reading learning and teaching. Is a Genie application and it uses gtk-3, pango, cogl, clutter, clutter-gtk and gstreamer. No problems for building under linux for linux, but how do it for Windows. I have seen some tutorials from Tarnyko and others but... there is anyone for help me? Thanks. Txasatonga. ___ vala-list mailing list vala-list@gnome.org mailto:vala-list@gnome.org https://mail.gnome.org/mailman/listinfo/vala-list ___ vala-list mailing list vala-list@gnome.org https://mail.gnome.org/mailman/listinfo/vala-list ___ vala-list mailing list vala-list@gnome.org https://mail.gnome.org/mailman/listinfo/vala-list ___ vala-list mailing list vala-list@gnome.org https://mail.gnome.org/mailman/listinfo/vala-list
Re: [Vala] [Genie] Build for windows under linux. Using minwg.
Hi again, Yes, I read the message and the response you got from Emmanuele (I subscribed to clutter-list, too ;-)). I think Clutter 1.2 may be using the XEmbed protocol behing the scenes ; hence why it only works on X11. So, it will be cool to upgrade clutter in ValaWinPKG. But Tarnyko is always busy :-. Me, updating anything in the Vala/GNOME win32 stack ? Whooops... I'd like to say I will do it, but failed miserably at past promises. My personal situation is very different today than when I released all this stuff. Buy ok, I promise you I will at least take a look at it. Regards, Tarnyko gontzal writes: I have recived a message from Emmanuel Bassi, and says... if you update to Clutter ≥ 1.5.2 (or current master) then embedding *should* work on non-X11 platforms, but it hasn't been thoroughly tested yet. ciao, Emmanuele. So, it will be cool to upgrade clutter in ValaWinPKG. But Tarnyko is always busy :-. Gontzal. or., 2014.eko iraren 19a 12:58(e)an, Tarnyko igorleak idatzi zuen: Hi gontzal, Tried to use the procedure from : http://www.tarnyko.net/en/?q=node/37 ? gontzal writes: OK. But... is not easy to find the gstreamer bundle for windows and the gtk-clutter bundle. Any body knows about them? Thanks. I will try it. Gontzal. ig., 2014.eko iraren 14a 20:22(e)an, Daniel Espinosa igorleak idatzi zuen: I can help you. You can see at GXml project in git.gnome.org http://git.gnome.org. I've managed to build it under windows with no problems. Just download GTK+ for windows bundle and use see to change prefix variable I'm all PC files to point to the Dir you uncompress this bundle. You must install mingw-w64 on your distribution. Then on terminal set PKG_CONFIG_PATH to pont the directory you uncompress gtk+ bundle and add to the path lib/pkgconfig directory; this is very important, if you don't set correctly, pkg-config will find PC files from your Linux Installation and you compilation will fail with lot errors on headers. When configure your software, use --host= to the platform you want to use, 32 or 64 bits. On Ubuntu you must use x86_64-w64-mingw32 for 64 bits and i686-w64-mingw32, if you get lot of errors from included headers then the above host targets are wrong. If most module use gobject introspection, you must disable because bundle doesn't include it. As you can see on GXml, I've use valac to get C code then use the mingw-w64 compiler to compile it to get exe and DLLs. C code must depend on a rule that use valac to get it. But be this is not required, may you want to use valac directly, in theory it must use mingw-w64 compiler because the host setting. El sep 14, 2014 8:29 AM, Gontzal Uriarte txasato...@gmail.com mailto:txasato...@gmail.com escribió: Hi!! I have finished a Katamotz Ejercicios new application for reading learning and teaching. Is a Genie application and it uses gtk-3, pango, cogl, clutter, clutter-gtk and gstreamer. No problems for building under linux for linux, but how do it for Windows. I have seen some tutorials from Tarnyko and others but... there is anyone for help me? Thanks. Txasatonga. ___ vala-list mailing list vala-list@gnome.org mailto:vala-list@gnome.org https://mail.gnome.org/mailman/listinfo/vala-list ___ vala-list mailing list vala-list@gnome.org https://mail.gnome.org/mailman/listinfo/vala-list ___ vala-list mailing list vala-list@gnome.org https://mail.gnome.org/mailman/listinfo/vala-list ___ vala-list mailing list vala-list@gnome.org https://mail.gnome.org/mailman/listinfo/vala-list
Re: [Vala] [Genie] Build for windows under linux. Using minwg.
OK. But... is not easy to find the gstreamer bundle for windows and the gtk-clutter bundle. Any body knows about them? Thanks. I will try it. Gontzal. ig., 2014.eko iraren 14a 20:22(e)an, Daniel Espinosa igorleak idatzi zuen: I can help you. You can see at GXml project in git.gnome.org http://git.gnome.org. I've managed to build it under windows with no problems. Just download GTK+ for windows bundle and use see to change prefix variable I'm all PC files to point to the Dir you uncompress this bundle. You must install mingw-w64 on your distribution. Then on terminal set PKG_CONFIG_PATH to pont the directory you uncompress gtk+ bundle and add to the path lib/pkgconfig directory; this is very important, if you don't set correctly, pkg-config will find PC files from your Linux Installation and you compilation will fail with lot errors on headers. When configure your software, use --host= to the platform you want to use, 32 or 64 bits. On Ubuntu you must use x86_64-w64-mingw32 for 64 bits and i686-w64-mingw32, if you get lot of errors from included headers then the above host targets are wrong. If most module use gobject introspection, you must disable because bundle doesn't include it. As you can see on GXml, I've use valac to get C code then use the mingw-w64 compiler to compile it to get exe and DLLs. C code must depend on a rule that use valac to get it. But be this is not required, may you want to use valac directly, in theory it must use mingw-w64 compiler because the host setting. El sep 14, 2014 8:29 AM, Gontzal Uriarte txasato...@gmail.com mailto:txasato...@gmail.com escribió: Hi!! I have finished a Katamotz Ejercicios new application for reading learning and teaching. Is a Genie application and it uses gtk-3, pango, cogl, clutter, clutter-gtk and gstreamer. No problems for building under linux for linux, but how do it for Windows. I have seen some tutorials from Tarnyko and others but... there is anyone for help me? Thanks. Txasatonga. ___ vala-list mailing list vala-list@gnome.org mailto:vala-list@gnome.org https://mail.gnome.org/mailman/listinfo/vala-list ___ vala-list mailing list vala-list@gnome.org https://mail.gnome.org/mailman/listinfo/vala-list
Re: [Vala] [Genie] Build for windows under linux. Using minwg.
for Gstreamer, you can find msi installer here : http://gstreamer.freedesktop.org/data/pkg/windows/ 2014-09-16 21:03 GMT+02:00 gontzal txasato...@gmail.com: OK. But... is not easy to find the gstreamer bundle for windows and the gtk-clutter bundle. Any body knows about them? Thanks. I will try it. Gontzal. ig., 2014.eko iraren 14a 20:22(e)an, Daniel Espinosa igorleak idatzi zuen: I can help you. You can see at GXml project in git.gnome.org http://git.gnome.org. I've managed to build it under windows with no problems. Just download GTK+ for windows bundle and use see to change prefix variable I'm all PC files to point to the Dir you uncompress this bundle. You must install mingw-w64 on your distribution. Then on terminal set PKG_CONFIG_PATH to pont the directory you uncompress gtk+ bundle and add to the path lib/pkgconfig directory; this is very important, if you don't set correctly, pkg-config will find PC files from your Linux Installation and you compilation will fail with lot errors on headers. When configure your software, use --host= to the platform you want to use, 32 or 64 bits. On Ubuntu you must use x86_64-w64-mingw32 for 64 bits and i686-w64-mingw32, if you get lot of errors from included headers then the above host targets are wrong. If most module use gobject introspection, you must disable because bundle doesn't include it. As you can see on GXml, I've use valac to get C code then use the mingw-w64 compiler to compile it to get exe and DLLs. C code must depend on a rule that use valac to get it. But be this is not required, may you want to use valac directly, in theory it must use mingw-w64 compiler because the host setting. El sep 14, 2014 8:29 AM, Gontzal Uriarte txasato...@gmail.com mailto: txasato...@gmail.com escribió: Hi!! I have finished a Katamotz Ejercicios new application for reading learning and teaching. Is a Genie application and it uses gtk-3, pango, cogl, clutter, clutter-gtk and gstreamer. No problems for building under linux for linux, but how do it for Windows. I have seen some tutorials from Tarnyko and others but... there is anyone for help me? Thanks. Txasatonga. ___ vala-list mailing list vala-list@gnome.org mailto:vala-list@gnome.org https://mail.gnome.org/mailman/listinfo/vala-list ___ vala-list mailing list vala-list@gnome.org https://mail.gnome.org/mailman/listinfo/vala-list ___ vala-list mailing list vala-list@gnome.org https://mail.gnome.org/mailman/listinfo/vala-list
Re: [Vala] [Genie] Build for windows under linux. Using minwg.
Hi, From: Gontzal Uriarte txasato...@gmail.com Sent: Sunday, 14 September 2014, 14:29 Subject: [Vala] [Genie] Build for windows under linux. Using minwg. I have finished a Katamotz Ejercicios new application for reading learning and teaching. Is a Genie application and it uses gtk-3, pango, cogl, clutter, clutter-gtk and gstreamer. No problems for building under linux for linux, but how do it for Windows. I have seen some tutorials from Tarnyko and others but... there is anyone for help me? Sounds like an interesting project. I've collected a few bookmarks to add to the Genie documentation at some point: Recent Vala on Windows binaries: https://github.com/hgoel0974/ValaOnWindows-Binaries GTK+ for Windows: http://www.gtk.org/download/index.php Possibly nice tutorial: http://www.0x00.to/post/2013/12/14/Compile-and-run-Vala-on-Windows-using-MinGW-builds I don't use Windows myself, but hope these will take you a step in the right direction. Pango seems to be part of GTK+ downloads, GStreamer website says it has MSI installers and Gnome wiki has this https://wiki.gnome.org/Projects/Clutter/Building/Windows about Clutter on Windows. Let us know if you get it working? Al ___ vala-list mailing list vala-list@gnome.org https://mail.gnome.org/mailman/listinfo/vala-list
Re: [Vala] [Genie] Build for windows under linux. Using minwg.
I can help you. You can see at GXml project in git.gnome.org. I've managed to build it under windows with no problems. Just download GTK+ for windows bundle and use see to change prefix variable I'm all PC files to point to the Dir you uncompress this bundle. You must install mingw-w64 on your distribution. Then on terminal set PKG_CONFIG_PATH to pont the directory you uncompress gtk+ bundle and add to the path lib/pkgconfig directory; this is very important, if you don't set correctly, pkg-config will find PC files from your Linux Installation and you compilation will fail with lot errors on headers. When configure your software, use --host= to the platform you want to use, 32 or 64 bits. On Ubuntu you must use x86_64-w64-mingw32 for 64 bits and i686-w64-mingw32, if you get lot of errors from included headers then the above host targets are wrong. If most module use gobject introspection, you must disable because bundle doesn't include it. As you can see on GXml, I've use valac to get C code then use the mingw-w64 compiler to compile it to get exe and DLLs. C code must depend on a rule that use valac to get it. But be this is not required, may you want to use valac directly, in theory it must use mingw-w64 compiler because the host setting. El sep 14, 2014 8:29 AM, Gontzal Uriarte txasato...@gmail.com escribió: Hi!! I have finished a Katamotz Ejercicios new application for reading learning and teaching. Is a Genie application and it uses gtk-3, pango, cogl, clutter, clutter-gtk and gstreamer. No problems for building under linux for linux, but how do it for Windows. I have seen some tutorials from Tarnyko and others but... there is anyone for help me? Thanks. Txasatonga. ___ vala-list mailing list vala-list@gnome.org https://mail.gnome.org/mailman/listinfo/vala-list ___ vala-list mailing list vala-list@gnome.org https://mail.gnome.org/mailman/listinfo/vala-list
Re: [Vala] [Genie] Build for windows under linux. Using minwg.
Please forgive me for my errors on writing, I'm on my phone. My instructions are for Cross compile on Linux to Windows. Just don't forget to use -mwindows to avoid terminal when execute your code on windows. If use valac use -X before to pass it to the mingw-w64 compiler. El sep 14, 2014 1:22 PM, Daniel Espinosa eso...@gmail.com escribió: I can help you. You can see at GXml project in git.gnome.org. I've managed to build it under windows with no problems. Just download GTK+ for windows bundle and use see to change prefix variable I'm all PC files to point to the Dir you uncompress this bundle. You must install mingw-w64 on your distribution. Then on terminal set PKG_CONFIG_PATH to pont the directory you uncompress gtk+ bundle and add to the path lib/pkgconfig directory; this is very important, if you don't set correctly, pkg-config will find PC files from your Linux Installation and you compilation will fail with lot errors on headers. When configure your software, use --host= to the platform you want to use, 32 or 64 bits. On Ubuntu you must use x86_64-w64-mingw32 for 64 bits and i686-w64-mingw32, if you get lot of errors from included headers then the above host targets are wrong. If most module use gobject introspection, you must disable because bundle doesn't include it. As you can see on GXml, I've use valac to get C code then use the mingw-w64 compiler to compile it to get exe and DLLs. C code must depend on a rule that use valac to get it. But be this is not required, may you want to use valac directly, in theory it must use mingw-w64 compiler because the host setting. El sep 14, 2014 8:29 AM, Gontzal Uriarte txasato...@gmail.com escribió: Hi!! I have finished a Katamotz Ejercicios new application for reading learning and teaching. Is a Genie application and it uses gtk-3, pango, cogl, clutter, clutter-gtk and gstreamer. No problems for building under linux for linux, but how do it for Windows. I have seen some tutorials from Tarnyko and others but... there is anyone for help me? Thanks. Txasatonga. ___ vala-list mailing list vala-list@gnome.org https://mail.gnome.org/mailman/listinfo/vala-list ___ vala-list mailing list vala-list@gnome.org https://mail.gnome.org/mailman/listinfo/vala-list
