On Thu, 21 Sep 2023 08:28:51 +0200
Torsten Duwe wrote:
> On Wed, 20 Sep 2023 10:09:29 +0200
> Harald Milz wrote:
>
> > In fact I tried to boot satip-axe from a USB stick but for unknown
> > reasons the box stuck to the original FW. :-(
>
> You must not partition the medium, but use it in
On Wed, 20 Sep 2023 10:09:29 +0200
Harald Milz wrote:
> In fact I tried to boot satip-axe from a USB stick but for unknown
> reasons the box stuck to the original FW. :-(
You must not partition the medium, but use it in "USB floppy disk mode".
Put a fat32 on it, with idl4k.scr in the root dir,
Hi Torsten,
long time no hear! Good you're still around!
On Tue, Sep 19, 2023 at 10:43:01AM +0200, Torsten Duwe wrote:
> There is an alternative firmware for this box
In fact I tried to boot satip-axe from a USB stick but for unknown reasons the
box stuck to the original FW. :-(
After
Hi Harald!
On Sun, 17 Sep 2023 19:49:39 +0200
Harald Milz wrote:
> Hi all,
>
> I recently got a stone-aged Digibit R1 to replace an even older PCI-E card.
[...]
There is an alternative firmware for this box
https://github.com/perexg/satip-axe/blob/master/dist/README