On 3/18/07, Martin Wache [EMAIL PROTECTED] wrote:
I switched the repacking of in my vdr... I don't think that it is
necessary.
Bye,
Martin
Hi,
I would like to disable the repacker in my VDR implementation as I think it
might be responsible for sync problems in transfer mode between my
Good day,
I want to connect a single LNB pointed to Astra2 and another LNB
connected to Astra1 each to a different DVB-S card in the same VDR.
Is this possible?
(Unfortunately, my electricians configured a single LNB and not quad
for the second satellite :-()
--
Best regards
Peer Oliver
On 3/18/07, Georg Acher [EMAIL PROTECTED] wrote:
That's a bit difficult, since our vdr has no exact mainline equivalent.
It may contain parts from different vdr versions. But as I've heard, it
should work also on a full featured card without any modifications. Maybe
you need to tweak the
Hi.
Reinhard Nissl wrote:
Halim Sahin wrote:
I was running alsamixer while changing the volume in VDR and in my case,
the PCM volume changes, not the master volume.
Have a look into xine's audio setup page. Maybe changing the alsa mixer
device to PCM helps.
Thats not my problem.
I hate to reply to my self, but this might help detailing
I want to connect a single LNB pointed to Astra2 and another LNB
connected to Astra1 each to a different DVB-S card in the same VDR.
Is this possible?
After browsing the wiki I found the entry for the CA to point to
DVB-S card number.
Hi list,
Let's say that i have one FF-card (dvb-c) and one budget card (dvb-t) in
my vdr-setup. I have connected the FF-card to my TV via RGB-scart. Now,
if i watch a dvb-t channel, will the mpeg stream still be decoded by the
FF-card and will the picture be sent out to the tv via the
alex bustamante wrote:
Hi list,
Let's say that i have one FF-card (dvb-c) and one budget card (dvb-t) in
my vdr-setup. I have connected the FF-card to my TV via RGB-scart. Now,
if i watch a dvb-t channel, will the mpeg stream still be decoded by the
FF-card and will the picture be sent out
Hello Stefan,
thanks for your answer.
Look for the SourceCaps patch.
There are patch packages which contain it on VDR portal.
Do you (or anyone else) know, if the SourceCaps patch is contained in
the Multipatch version on e-tobi Debian repository?
--
Best regards
Peer Oliver Schmidt
PGP Key
Hi,
Iain wrote:
Maybe an audio post process plugin could scale all audio samples by a
factor to simulate changing the volume. But I'm sorry, no such plugin
exists at the moment.
The older Xine I use (v0.99.4.) has an option Audio mixer control
method (audio_mixer_method), on the GUI tab,
Hello Reinhard,
Mar 21 18:06:31 vdr vdr: [17991] ERROR: no DiSEqC parameters found
for channel 13
You are missing some lines in diseqc.conf. Just copy the 4 lines for
S19.2E and replace S19.2E by S28.2E.
Thank you very much. It is working just great!
--
Best regards
Peer Oliver Schmidt
Hello,
On Mi, Mär 21, 2007 at 08:27:49 +0100, Reinhard Nissl wrote:
Iain wrote:
Maybe an audio post process plugin could scale all audio samples by a
factor to simulate changing the volume. But I'm sorry, no such plugin
exists at the moment.
The older Xine I use (v0.99.4.) has an
Hi,
On Mi, Mär 21, 2007 at 08:55:10 +0100, Reinhard Nissl wrote:
Hi,
Halim Sahin wrote:
Hhm, I've had a look into .xine/config and there is this option you've
mentioned. But I did't find it in xine's setup dialog. It might well be
that this software mode does what I've mentioned above.
Hi,
Halim Sahin wrote:
Hhm, I've had a look into .xine/config and there is this option you've
mentioned. But I did't find it in xine's setup dialog. It might well be
that this software mode does what I've mentioned above.
Actually, the config option is in the Gui tab, but I've looked for it
13 matches
Mail list logo
