They test the temperature at the output pipe, but this does not say much
about the energy when the mass flow is not known.
When Lewan looked over the fence to the heat dissipators then he should
have feeled A LOT of hot air. He did not mention anything.
It would be interesting to know. I
4 m^3/s is not too much. That is a column of 1.6m^2 ascending at 1.6m/s.
The area that concealed the radiators was much bigger.
2011/10/31 Peter Heckert peter.heck...@arcor.de
They test the temperature at the output pipe, but this does not say much
about the energy when the mass flow is not
Am 31.10.2011 15:38, schrieb Daniel Rocha:
4 m^3/s is not too much. That is a column of 1.6m^2 ascending at
1.6m/s. The area that concealed the radiators was much bigger.
I feel a hot stream of air if my car stands in front of the garage, it
is still hot and the motor fan is running. My car
Peter Heckert wrote:
When Lewan looked over the fence to the heat dissipators then he
should have feeled A LOT of hot air. He did not mention anything.
I asked him about that. He said he did not have a chance to reach over
the barrier and check. I believe others have said it was hot.
As I
That is open field and and there was wood surrounding the radiator. And
even the wood close to were the viewing was done was not close to the
radiator air exit.
-- Forwarded message --
From: Peter Heckert peter.heck...@arcor.de
Date: 2011/10/31
Subject: Re: [Vo]:Video added
Am 31.10.2011 15:47, schrieb Jed Rothwell:
Peter Heckert wrote:
When Lewan looked over the fence to the heat dissipators then he
should have feeled A LOT of hot air. He did not mention anything.
I asked him about that. He said he did not have a chance to reach over
the barrier and check. I
Peter Heckert wrote:
They test the temperature at the output pipe, but this does not say
much about the energy when the mass flow is not known.
The mass flow is known. It is in the report. It was 675 L/h.
Of course you have to trust that Fioravanti reported it correctly.
It would be
summerday.
Now imagine this amount of energy concentrated on an area of 47 m^2. And
this area was less. Probably 25 m^2.
-- Forwarded message --
From: *Peter Heckert* peter.heck...@arcor.de
mailto:peter.heck...@arcor.de
Date: 2011/10/31
Subject: Re: [Vo]:Video added to NyTeknik report
of energy concentrated on an area of 47 m^2. And
this area was less. Probably 25 m^2.
-- Forwarded message --
From: Peter Heckert peter.heck...@arcor.de
Date: 2011/10/31
Subject: Re: [Vo]:Video added to NyTeknik report
To: vortex-l@eskimo.com
Am 31.10.2011 15:38, schrieb
]:Video added to NyTeknik report
To: vortex-l@eskimo.com mailto:vortex-l@eskimo.com
Am 31.10.2011 15:38, schrieb Daniel Rocha:
4 m^3/s is not too much. That is a column of 1.6m^2 ascending at
1.6m/s. The area that concealed the radiators was much bigger.
I feel a hot stream of air if my car stands
^2.
-- Forwarded message --
From: Peter Heckert peter.heck...@arcor.de
Date: 2011/10/31
Subject: Re: [Vo]:Video added to NyTeknik report
To: vortex-l@eskimo.com
Am 31.10.2011 15:38, schrieb Daniel Rocha:
4 m^3/s is not too much. That is a column of 1.6m^2 ascending
Subject: Re: [Vo]:Video added to NyTeknik report
To: vortex-l@eskimo.com mailto:vortex-l@eskimo.com
Am 31.10.2011 15:38, schrieb Daniel Rocha:
4 m^3/s is not too much. That is a column of 1.6m^2 ascending
at 1.6m/s. The area that concealed the radiators was much bigger.
I
Subject: Re: [Vo]:Video added to NyTeknik report
To: vortex-l@eskimo.com
Am 31.10.2011 15:38, schrieb Daniel Rocha:
4 m^3/s is not too much. That is a column of 1.6m^2 ascending at 1.6m/s.
The area that concealed the radiators was much bigger.
I feel a hot stream of air if my car stands
a) [00:00 - end] The genset was very loud ... could they really
measure the eCat at 56 dB ?
b) There were apparently two steam pipes coming out [00:42] , but
there was a thermocouple [00:43] (and fluid water collector [00:44])
on only one .
c) The pipe was cool, and the ball-valve handle
Alan J Fletcher a...@well.com wrote:
[00:43] (and fluid water collector [00:44]) on only one .
And the valve was closed...
—Jouni
Daniel Rocha wrote:
In that case, there was a ceiling, so, even though the windows were
opened, the hot air was trapped.
The fans were placed outside the building. The barriers around the fans
will prevent much of warm air from getting into the building.
- Jed
I was not referring to Rossi's building...
2011/10/31 Jed Rothwell jedrothw...@gmail.com
Daniel Rocha wrote:
In that case, there was a ceiling, so, even though the windows were
opened, the hot air was trapped.
The fans were placed outside the building. The barriers around the fans
will
Daniel Rocha wrote:
I was not referring to Rossi's building...
Oh. I guess you were talking about the aluminum casting factory
described by Heckert.
These e-mail conversations can be hard to follow.
- Jed
At 09:59 AM 10/31/2011, Alan J Fletcher wrote:
a) [00:00 - end] The genset was very loud ...
could they really measure the eCat at 56 dB ?
b) There were apparently two steam pipes coming
out [00:42] , but there was a thermocouple
[00:43] (and fluid water collector [00:44]) on only one .
Anyone recognize these men:
http://i.imgur.com/hDu4Q.jpg
http://i.imgur.com/wXTXn.jpg (MIBs)
or this lady in uniform:
http://i.imgur.com/fc4o6.jpg
?
And how come all the women there were beautiful?
T
On Mon, Oct 31, 2011 at 8:52 PM, Terry Blanton hohlr...@gmail.com wrote:
Anyone recognize these men:
http://i.imgur.com/hDu4Q.jpg
http://i.imgur.com/wXTXn.jpg (MIBs)
The sitting men have to be from the US and they all look like the work
for the government. None are smiling. We're talking
These people look like Scandinavians to me.
-drl
--
I write a little. I erase a lot. - Chopin
--- On Mon, 10/31/11, Terry Blanton hohlr...@gmail.com wrote:
From: Terry Blanton hohlr...@gmail.com
Subject: Re: [Vo]:Video added to NyTeknik report
On Mon, Oct 31, 2011 at 9:42 PM, Danny Ross Lunsford antimatte...@yahoo.com
wrote:
These people look like Scandinavians to me.
Maybe Aryans? ;-)
T
23 matches
Mail list logo
