of microwave . Ive got no idea at this stage Do you ?
Pete(The mad Aussie backyarder)
Date: Mon, 19 Dec 2011 22:42:42 -0800
Subject: Re: [Vo]:Phen formula from ecatbuilder.com
From: ecatbuil...@gmail.com
To: vortex-l@eskimo.com
Hi Peter,
That's a lot of pressure and temperatures
experimented with what he stated ?
Date: Mon, 19 Dec 2011 22:18:38 -0700
From: prot...@frii.com
To: vortex-l@eskimo.com
Subject: RE: [Vo]:Phen formula from ecatbuilder.com
I think you can buy it in a pressurized tank with a regulator from gas
suppliers.
On Tuesday, December 20, 2011
Thanks Robert I appreciate your advice Are you building ?
Date: Tue, 20 Dec 2011 12:23:20 +
Subject: Re: [Vo]:Phen formula from ecatbuilder.com
From: robert.gulliver.l...@gmail.com
To: vortex-l@eskimo.com
Things to consider:
1/ Probably want to make sure that the hydrogen you
to work in
and does not reward risk takers or improvised fixes.
On 20 December 2011 20:01, Peter B ddc...@hotmail.com wrote:
Thanks Robert I appreciate your advice
Are you building ?
Date: Tue, 20 Dec 2011 12:23:20 +
Subject: Re: [Vo]:Phen formula from ecatbuilder.com
From
25 Hz to 100 MHz is a VERY wide range. Finding the right one would be
like looking for a needle in a hay stack. How bout a few clues as to the
actual frequency and the power level required? Most F Gens do not output
much power.
AG
On 12/20/2011 5:52 AM, David ledin wrote:
Phen formula from
Hey Aussie,
It seems like Chan is doing all his heating by RF coil.
A slow tuning of the dial may be all it takes to find a harmonic that works.
I take it you've tried the 81.9Mhz figure from Storms? Maybe ask how
he came up with that number?
I have some new copper pipe, a freq gen, and some new
81.9 MHz is the NMR frequency for Deuterium. READ THIS:
http://www.lenr-canr.org/acrobat/BockrisJtriggering.pdf The RFG and wide
band RF amp model used are quoted.
AG
On 12/20/2011 7:41 AM, ecat builder wrote:
Hey Aussie,
It seems like Chan is doing all his heating by RF coil.
A slow
Hi Guys , Pete from Australia here , I just found your site and joined up . I
got interested in Phen as well
Phen talks about The chamber is pressurized
with hydrogen to 2000 psi and heated to 200 C
I'm trying replicate this stuff, got some of the gear here already , the rest
is coming .
It comes out of a nearly full tank at more than that.
-Original Message-
From: Peter Brosnan [mailto:ddc...@hotmail.com]
Sent: Monday, December 19, 2011 6:53 PM
To: vortex-l@eskimo.com
Subject: RE: [Vo]:Phen formula from ecatbuilder.com
Hi Guys , Pete from Australia here , I
I think you can buy it in a pressurized tank with a regulator from gas
suppliers.
On Tuesday, December 20, 2011 11:53 AM +1000 Peter Brosnan ddc...@hotmail.com
wrote:
Hi Guys , Pete from Australia here , I just found your site and joined up . I
got interested in
Phen as well
Phen talks
Hi Peter,
That's a lot of pressure and temperatures to work with... Remember the
pressure will increase significantly when heated. Every part of your
container needs to be rated for whatever the final temp/pressure
combination is, including tubing, valves, sealant, etc. I'd like to
know how you
be enough ?
Intend to follow Phens formula first
Anybody here experimented with what he stated ?
Date: Mon, 19 Dec 2011 22:18:38 -0700
From: prot...@frii.com
To: vortex-l@eskimo.com
Subject: RE: [Vo]:Phen formula from ecatbuilder.com
I think you can buy it in a pressurized tank
Dec 2011 22:42:42 -0800
Subject: Re: [Vo]:Phen formula from ecatbuilder.com
From: ecatbuil...@gmail.com
To: vortex-l@eskimo.com
Hi Peter,
That's a lot of pressure and temperatures to work with... Remember the
pressure will increase significantly when heated. Every part of your
container needs
13 matches
Mail list logo
