my PXE running in pfsense (192.168.100.1) works like this:
SERIAL 0 38400
# CONSOLE 0
DEFAULT menu.c32
ALLOWOPTIONS 0
PROMPT 0
TIMEOUT 0
MENU TITLE --== Install Voyage ==--
LABEL rootmenu
MENU LABEL ..
kernel menu.c32
append pxelinux.cfg/default
LABEL Voyage
MENU LABEL ^Voyage
2010/7/30 Jim Cromie jim.cro...@gmail.com
thanks Michael,
On Sun, Jul 25, 2010 at 1:44 AM, Michael Steinmann
mike.steinm...@gmail.com wrote:
my PXE running in pfsense (192.168.100.1) works like this:
SERIAL 0 38400
# CONSOLE 0
DEFAULT menu.c32
ALLOWOPTIONS 0
PROMPT 0
Hello Edgar,
there is no such thing as a power button on the alix2 boards, they're
intended to run 24/7.
-Michael
2010/9/22 Edgar Landivar e_landi...@palosanto.com
Dear Folks,
I am a newbie, so maybe my question is a little stupid :( ... but anyone
knows how to connect a power button to
oh, I get it, I was thinking of a power-off switch to cut power.
yes, all alix boards have a switch S1 (on some models it is not populated,
but one could solder it there)
-Michael
2010/9/23 Andreas Delleske delle...@vauban.de
Dear Edgar,
I am a newbie, so maybe my question is a little
try unetbootin: http://unetbootin.sourceforge.net/
2010/10/13 Jeff Ramin jeff.ra...@singlewire.com
Hi folks.
Are there instructions somewhere regarding how to create a bootable USB
drive that I can then install voyage from? Essentially, I want the exact
same
functionality you get from
this wont be that easy. The following links all refere to FreeBSD with the
same goal. See:
http://events.ccc.de/congress/2005/fahrplan/attachments/687-slides_Complete_Hard_Disk_Encryption.pdf
http://www.wanda25.de/geli.html
This should give you an idea ...
2010/11/2 lestoilfante
if you are sure the source and the destination CF have the same geometry you
could use dd or m0n0's PhysDiskWrite to copy the entire CF
2011/1/7 Stéphane Acounis stephane.acou...@subatech.in2p3.fr
Le Thu, 06 Jan 2011 13:46:44 -0600
Jeff Ramin jeff.ra...@singlewire.com a écrit:
Hi folks.
This problem had shown up in some earlier releases as well but it was
usually taken care of by the time a stable release was made.
[5.853862] udev[994]: renamed network interface eth1 to eth2
[6.695349] udev[993]: renamed network interface eth0 to eth3
unfortunately this is not solved
how about this miniPCI adaptor:
http://www.openvox.com.cn/products_detail.php?genre_id=41id=139
Michael
2011/6/30 Adrian Reyer voyage-li...@lihas.de
Hi,
we are using Voyage for quite some time now as VPN-gateway, interface
of an USB-scanner to network via saned and as simple gateway. Mostly
this is what my pxelinux.cfg\default looked like for v0.6.2,
indicating the necessary files:
SERIAL 0 38400
DEFAULT menu.c32
ALLOWOPTIONS 0
PROMPT 0
TIMEOUT 0
MENU TITLE Server PXE Boot Menu
LABEL Voyage
MENU LABEL ^Voyage 0.6.2
KERNEL voyage/vmlinuz1 root=LABEL=ROOT_FS
at the time
this worked for you?
On Wed, Aug 3, 2011 at 06:04, Michael Steinmann mike.steinm...@gmail.com
wrote:
Hi John,
this is from some other thread a while a go...
see the attached rar, but the files from the ISO are missing
this worked for me, at least it did with older voyage ISOs
are not correct. What is the
correct tty console setting for a regular console setup (no serial
connectivity)?
This is by far the closest Ive been to a solution in 3 weeks then I ever
have been.
If this works, I owe you a pizza from the pie (:p)
On Wed, Aug 3, 2011 at 07:57, Michael Steinmann
try this image:
http://www.pcengines.ch/file/voyage_current.rar
/michael
2011/8/3 Sundar m...@devsundar.com
Hi,
I recently bought ALIX2D13 board. I do not have Null modem cable to connect
to the board.
Is it possible to install Voyage use without Null modem cable? The idea
is to
'29/12/2011 until Mon 02/01/2012' to me looks like just a few days, thanks
...christ or Francesco?
Michael
2012/1/2 Jim Cromie jim.cro...@gmail.com
2011/12/31 Francesco Gardini fgard...@sanmarcoinformatica.it:
I am out of the office from Thu 29/12/2011 until Mon 02/01/2012.
Oh
try this image:
http://www.pcengines.ch/file/voyage_current.rar
2012/1/7 Mirco Schmidt mirco.schm...@mac.com
I've like half a dozen and they all boot fine…
Am 07.01.2012 um 04:52 schrieb Rich E Neese:
any one here have a alix 3c2 board. and tried to load up
voyage-one-0.8.0 on it . I
http://www.pcengines.ch/file/voyage_versions.log
2012/1/7 Mirco Schmidt mirco.schm...@mac.com
Where's the difference, is there some change log?
Am 07.01.2012 um 11:49 schrieb Michael Steinmann:
try this image:
http://www.pcengines.ch/file/voyage_current.rar
2012/1/7 Mirco Schmidt
modification's from the original
version?
Just asking because I'm interested in what the guys at PCe did for better
integrating a lix Hardware…
Greetz
Mirco
Am 07.01.2012 um 12:17 schrieb Michael Steinmann:
http://www.pcengines.ch/file/voyage_versions.log
2012/1/7 Mirco Schmidt mirco.schm
Hi,
I had bad experiences with Profilic based adaptors, they are a POS!
Get a silicon labs cp210x based adaptor, which I think are even better than
those from FTDI.
http://www.alibaba.com/product-gs/288753118/cp2102_usb_rs232_cable_VCC_GND.html
://www.silabs.com/pages/DownloadDoc.aspx?FILEURL=Support%20Documents/Software/an144sw.zipsrc=SoftwardDownloadsWebPart
I've produced PCBs with the CP2102 and I really can recommend them, let me
know if you want to go that road...
Best regards,
Michael Steinmann
2012/1/18 Pippo Pippo 77 pippopipp
from your experience?
Thanks and good night
2012/1/18 Michael Steinmann mike.steinm...@gmail.com
I have such cables, and they are fully supported by Linux.
AFAIK there is no multiple adapter chipset, see
http://www.silabs.com/products/interface/usbtouart/Pages/usb-to-uart-bridge.aspx
it just needs.
Please let us know your findings.
Best regards,
Michael Steinmann
2012/1/22 linux123 24b...@comcast.net
Hello,
I am using Voyage Linux MPD Version: 0.8 (Build Date 20111030) with an Alix
2D2 board for my music server which connects to an Ayre QB9 external USB
DAC. I
you can mix IDE and CF, but since the CF is set to master by the alix hw
design you MUST set the IDE drive to slave.
Of course it then boots to the CF because it is set to master.
Michael
2012/2/4 Pippo Pippo 77 pippopipp...@email.it
Hi,
many thanks to all.
I'll try as soon as arrive new
you can use the second RS232 on the alix3d2 on J4 (see
http://pcengines.ch/alix3d2.htm ). This connector has TTL leveled RS232
directly compatible with the gps module you mentioned (
http://www.sparkfun.com/products/8234 )
Michael
2012/5/31 Brian Wallen bwal...@gmail.com
I'm using this outdoor
btw, I'm just curious, but where do you use such a heavy enclosure ready to
mount on a roof pole in combination with a GPS? Maybe on a cargo ship?
Michael
2012/5/31 Michael Steinmann mike.steinm...@gmail.com
you can use the second RS232 on the alix3d2 on J4 (see
http://pcengines.ch/alix3d2
yes, this means for sure there is no RTS/DTR on alix boards.
Michael
2012/7/1 Rajarajan Rajamani r.rajam...@gmail.com:
I am trying to use an X10 home automation dongle (C17a, also known as
firecracker) on the serial port. This device is driven via the RTS/DTR
pins on the RS232. I have been
it is Pascal the boss, Dominque sending all the stuff out and me doing the
support.
Michael
2012/8/14 Brian Wallen bwal...@gmail.com
So how many guys work at PC Engines? It's not just Pascal is it?
On Tue, Aug 14, 2012 at 11:21 AM, Protech Caribsurf prot...@caribsurf.com
wrote:
Michael
,
Michael Steinmann
2012/8/29 Marcus Scholz comman...@commander1024.de
Am 28.08.2012 20:45, schrieb mailsvb:
Hi everyone,
I have a question regarding my setup.
First, let me describe my setup, hope I don't miss anything ;-)
- I'm using voyage linux on my Alix 2d3 board
- I tried
Hi Brian,
new PC Engines boards are to come Q2/2013
apu = AMD 1 GHz dual core, 2 or 4 GB DDR3, 3 RTL8111E Gigabit Ethernet, 2
miniPCI express, 1 m-SATA SSD, 1 SD card connected via USB, same form
factor as alix2d13
Best regards,
MIchael
2013/1/11 Brian Wallen bwal...@gmail.com
Hi PC
Hi Rainer,
what you need is the tool called usb-modeswitch-data, see
https://packages.debian.org/squeeze/usb-modeswitch
Michael
2014-03-31 0:16 GMT+02:00 Rainer Stratmann rainerstratm...@t-online.de:
Hello,
can someone help me to configure the Huawei E176 with voyage Version 0.8.x?
When
Rainer,
it's not getting easier than this, you should try it:
apt-get install usb-modeswitch-data usb-modeswitch
usb_modeswitch --huawei-mode
Michael
2014-03-31 10:21 GMT+02:00 Rainer Stratmann rainerstratm...@t-online.de:
Hello Michael,
that sounds complicated for me.
I tried with insmod
Hi,
are you using a null-modem cable or some funny gender changer?
it must be a null-modem cable...
Best regards,
Michael Steinmann
2014-11-10 2:52 GMT+01:00 Kim-man 'Punky' TSE punky...@punknix.com:
On 11/7/2014 4:29 PM, Abhay Gupta wrote:
I configured putty over */etc/ttyUSB0* with speed
help will be appreciated.
For absolute surety I'm gonna order a brand new cable. Do I need anything
else? Like any null modem connector or something? Please tell me so that I
can order them together.
On Mon, Nov 10, 2014 at 2:19 PM, Michael Steinmann
mike.steinm...@gmail.com wrote:
Hi
Hi,
on other alix boards the same GPIO is used for the buzzer, that is why the
alix6f2 has no buzzer.
Unload the pcspkr module and try again.
Best regards,
Michael Steinmann
2014-11-27 7:49 GMT+01:00 Abhay Gupta abhay.gu...@symstream.com:
Hi All,
I am trying to enable the SIM slot under
the
GPIO driver?
On Thu, Nov 27, 2014 at 2:04 PM, Michael Steinmann
mike.steinm...@gmail.com wrote:
Hi,
on other alix boards the same GPIO is used for the buzzer, that is why
the alix6f2 has no buzzer.
Unload the pcspkr module and try again.
Best regards,
Michael Steinmann
2014-11-27
instead of enabling and disabling PXE in the settings of the alix before
and afterwards, simply press 'n' while the RAM is counting and it boots to
PXE.
Best regards,
Michael Steinmann
2015-08-06 17:04 GMT+02:00 cotarelo2 cotare...@hotmail.com:
Yes, I know the process :)
But in the version
have you tried giving the clients behind the bridge fixed IP addresses?
does traffic pass?
have you also tried unencrypted wlan?
2016-10-05 9:20 GMT+02:00 tux john :
> Thanks a lot for the quick reply. the post you send, it is currently the
> one that i am using. The problem is
Voyage Linux outputs the console to the serial port.
Perhaps the board is running. Ping it, ssh to it, change /etc/inittab.
2016-09-15 21:05 GMT+02:00 Rainer Stratmann :
> Voyage 0.10 does not run with the
> Mainboard Jetway NF9T-2930 (Intel Bay Trail-M)
>
do this:
remountro
e2fsck /dev/sda1
2016-11-26 14:04 GMT+01:00 Andreas Delleske :
> Hi all,
>
> after having successfully installed Voage Linux 0.10.0 on a Compact
> Flash disk for an ALIX board, the startup messages are reminding me to
> use fsck as the data structure
38 matches
Mail list logo