Re: [wsjt-devel] TS-450S

On 2/8/21 9:33 PM, Black Michael via wsjt-devel wrote: Hmmm..that's 4-wire...so ground, tx, rx, and 5V and wouldn't work with hardware flow control. Mike W9MDB Hi Mike and all, RTS/CTS is the same as HARDWARE. Here these lines are not present, as you explain well. XON/XOFF (aka DC1/DC3,

[wsjt-devel] #Feature request. 2.4.0

Hi all. I am testing Q65 and realized that we are missing Short hand indicator on waterfall display, which is provided for JT65. (three yellow lines suggesting the RO/RRR/73 tones.) While less Q65/QRA64 users are using shorthand, it is good to have those since Sh will not be decoded and users

Re: [wsjt-devel] TS-450S

This one will work. https://www.adafruit.com/product/4364 Aug AG5AT Sent from my iPad > On Feb 8, 2021, at 3:53 PM, August Treubig wrote: > > Too many on ebay are garbage clones. So find a legit 5 volt one. > You can wire rts to cts, etc. > Aug > AG5AT > > Sent from my iPad > >>>

[wsjt-devel] Splash screen update

2.3 and 2.4-rc1 both still have the defunct Yahoo Groups support email address on the splash screeen. ~W. Halstead KN6HXP ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] WSJT-X v2.3.0 Oc42df.

Hi Bill, I was surprised I had seen no replies, and then went to the archives and found ; " *Re: [wsjt-devel] WSJT-X v2.3.0 Oc42df. * From: Bill Somerville - 2021-02-08 15:44:41 On 08/02/2021 15:29, Adrian wrote: Working with

[wsjt-devel] WSJT-X v2.3.0 Oc42df.

Thanks Preston, will try again tonight. I am actually using 2000 audio freq not 1500. So that setting changed the gui options seen, makes sense. You were on my 2000 mark last night, so F Tol should be within needed limits at 20, with both our txcr extremely freq accurate. I am using the

Re: [wsjt-devel] RFI Susceptibility

On 2/8/2021 4:19 PM, JOE MIXSELL wrote: Wonder if anyone has seen this behavior and if so what might you have done to eliminate it.  Set up is TS 590, MFJ 1204 and HP labtop. Cabling supplied by MFJ with the 1204 unit.  Antenna is ground mounted vertical about 35 to 40 feet from shack.  For a

Re: [wsjt-devel] RFI Susceptibility

Doug, easy to check, will do. Joe From: Doug Bates Sent: Monday, February 8, 2021 3:38 PM To: WSJT software development Subject: Re: [wsjt-devel] RFI Susceptibility Joe, Before blaming the problem on RFI you may want to verify that the rig is getting full

Re: [wsjt-devel] RFI Susceptibility

Joe, Before blaming the problem on RFI you may want to verify that the rig is getting full power into the rig. I once had a problem with my TS-2000 that turned out to be a power cord fuse problem, the rig ran ok at low power but at higher output settings I had multiple intermittent problems.

[wsjt-devel] RFI Susceptibility

Wonder if anyone has seen this behavior and if so what might you have done to eliminate it. Set up is TS 590, MFJ 1204 and HP labtop. Cabling supplied by MFJ with the 1204 unit. Antenna is ground mounted vertical about 35 to 40 feet from shack. For a power out level of 25 watts or less the

Re: [wsjt-devel] TS-450S

Too many on ebay are garbage clones. So find a legit 5 volt one. You can wire rts to cts, etc. Aug AG5AT Sent from my iPad > On Feb 8, 2021, at 3:30 PM, David Tiller wrote: > > Also, the CP2012 is not 5v tolerant. > https://www.sparkfun.com/datasheets/IC/cp2102.pdf > >> On Feb 8,

Re: [wsjt-devel] TS-450S

Also, the CP2012 is not 5v tolerant. https://www.sparkfun.com/datasheets/IC/cp2102.pdf > On Feb 8, 2021, at 3:33 PM, Black Michael via wsjt-devel > wrote: > > Hmmm..that's 4-wire...so ground, tx, rx, and 5V and wouldn't work with > hardware flow control. > > Mike W9MDB > > > > > On

Re: [wsjt-devel] TS-450S

Hmmm..that's 4-wire...so ground, tx, rx, and 5V and wouldn't work with hardware flow control. Mike W9MDB On Monday, February 8, 2021, 01:33:11 PM CST, August Treubig wrote: A din 6 pin and this will work fine. https://www.adafruit.com/product/954 No magic.  Just a bit of

Re: [wsjt-devel] TS-450S

A din 6 pin and this will work fine. https://www.adafruit.com/product/954 No magic. Just a bit of soldering. Aug AG5AT Sent from my iPad > On Feb 8, 2021, at 1:02 PM, Bill Somerville wrote: > >  > Hi Mike, > > there are several third-party replacements for the now unavailable IF-232C >

Re: [wsjt-devel] TS-450S

Hi Mike, there are several third-party replacements for the now unavailable IF-232C module that is needed on this and other early Kenwood rigs. Most faithfully replicate the original IF-232C, some may not. The manual is almost certainly correct, the reporter, if he is correct, almost

Re: [wsjt-devel] WSJT-X 2.3.0 and Later vs. FTDX3000

On 08/02/2021 18:50, Jim Jennings wrote: Spent a couple hours on the phone last weekend with (my cousin) AC6CD, trying to resolve a problem he has experienced with both v. 2.3.0 and v. 2.4.0-RC1 while operating FT8.  When he enables transmit in that mode, the Enable TX is dropped at the end of

Re: [wsjt-devel] TS-450S

The output of the 6 pin connector is 5 volts ttl. And it does work. My 450 died, but I used it as recently as 2 years ago. Aug AG5AT Sent from my iPad > On Feb 8, 2021, at 12:46 PM, John Brooks wrote: > >  > The 80s standard Kenwood 6 pin CAT interface used with the IF-232C level >

[wsjt-devel] WSJT-X 2.3.0 and Later vs. FTDX3000

Spent a couple hours on the phone last weekend with (my cousin) AC6CD, trying to resolve a problem he has experienced with both v. 2.3.0 and v. 2.4.0-RC1 while operating FT8.  When he enables transmit in that mode, the Enable TX is dropped at the end of the transmission, requiring him to

Re: [wsjt-devel] TS-450S

The 80s standard Kenwood 6 pin CAT interface used with the IF-232C level converter has CTS on pin 4, and RTS on pin 5.  TX (out of the radio) is pin 2, RX is pin 3. http://www.radiomanual.info/schemi/KENW_ACC/Kenwood_IF-232C_user.pdf John N9ZL On 2/8/21 1:17 PM, Black Michael via wsjt-devel

Re: [wsjt-devel] TS-450S

The dude said "manual is wrong". Trying to get more information on serial cable to see if that's the cause. Old thread noticed a difference between cable types on a 450.  Might have to do with RTS/CTS wiring differences and whether the cable supports hardware flow control.

Re: [wsjt-devel] TS-450S

On 08/02/2021 17:45, Black Michael via wsjt-devel wrote: Anybody with a TS-450S out there that is available for some testing? I've got somebody claiming it needs 1 stop bit and XONXOFF handshake which I've never heard before and 2 stop bits and HARDWARE handshake is the default setup and has

[wsjt-devel] TS-450S

Anybody with a TS-450S out there that is available for some testing? I've got somebody claiming it needs 1 stop bit and XONXOFF handshake which I've never heard before and 2 stop bits and HARDWARE handshake is the default setup and has been for years. Mike W9MDB

Re: [wsjt-devel] wsjtx-2.4.0-rc1-Darwin.dmg crashes

Thanks John - I’ll wait for rc2 as 2.3.0 works great > On Feb 8, 2021, at 8:03 AM, John Nelson via wsjt-devel > wrote: > > Manfred, > > This has already been reported. A bug in rc1 which willl be fixed in the > next release. > > You can launch wsjtx by typing this in a Terminal window: >

Re: [wsjt-devel] wsjtx-2.4.0-rc1-Darwin.dmg crashes

Manfred, This has already been reported. A bug in rc1 which willl be fixed in the next release. You can launch wsjtx by typing this in a Terminal window: /Applications/wsjtx.app/Contents/MacOS/wsjtx assuming that your code is in the Applications folder. — John G4KLA smime.p7s

[wsjt-devel] wsjtx-2.4.0-rc1-Darwin.dmg crashes

On a MacPro 2012 - running Mojave - 12 cpu’s 128gb memory 2.4.0-rc1 crashes after about 30 seconds, No debug page. This happens on precompiled version from website , also if I compile on my machine same thing Latest git version of Hamlib and wsjt-x install on my machine: wsjt-x source:

Re: [wsjt-devel] WSJT-X v2.3.0 Oc42df.

On 08/02/2021 15:29, Adrian wrote: Working with N6SS trying FST4-300 tonight on 160m we noticed a few things ; His wsjtx gui has a freq high and low parameter, whereas mine does not, but has a F Tol parameter, which he has not. However both his and mine show version WSJT-X v2.3.0 Oc42df. For

[wsjt-devel] WSJT-X v2.3.0 Oc42df.

Working with N6SS trying FST4-300 tonight on 160m we noticed a few things ; His wsjtx gui has a freq high and low parameter, whereas mine does not, but has a F Tol parameter, which he has not. However both his and mine show version WSJT-X v2.3.0 Oc42df. For final v2.3.0 release in the help info