Hi,
Is there a way to build binaries for distribution from the 4.3.0 source
tree, similar to the ones made publicly available? I am using XFree86
4.3.0 on Solaris 2.5.1 x86, so there are none currently available that I
can use, plus there are some minor changes that I need to be included in
our
glenn greenfield wrote on 2003-06-22 03:21 UTC:
Here's the offending line from fonts.conf:
!--Font directory list configured Sat Jun 21 17:29:27 Local timezone
must be set--see zic manual page 2003 --
XML is known to be a rather dangerous file format that requires enormous
care to be
first check on your log which version of X you run (RH 7.3 has both 3.3.6 and 4.1 if I
remember
well)
Check in the same log whether it uses XF86Config or XF86Config-4
Then look in the appropriate file whether there is a Section Keyboard
if yes this is a 3.3.6 config file if not it is a X 4.x
I am confronted with a similar problem
I understood that, according to this list, one should use the X 4.2 Matrox drivers
instead of the
ones for 4.3
I would be interested to have that confirmed
Lionel
--- Ian Romanick [EMAIL PROTECTED] wrote:
[EMAIL PROTECTED] wrote:
I have downloaded the
I thought that the 845 was first supported by X 4.3 which would be RH 9.0
Lionel
--- rajaguru mahadevan [EMAIL PROTECTED] wrote:
redhat 8.0 gui won't start because i changed the display resolution to
1024 * 768 at 24 bitsper second
the monitor is a lg 500g
845 intel glly original motherboard
Hello,
I tried to upgrade from 4.3.0 to the cvs snapshot, but I have problem :
I started X just by typing X so I have the X background and the mouse.
From another console I typed export DISPLAY=:0 and xclock :
nothing is printed on the console, nothing is displayed on the X screen.
You probably clobered the init file in which you started whichever window manager you
were using.
The file is usually .initrc (I am not sure, I am not on my linux mobo) but it can be
something
else (I believe RH uses .Clients or something like that...) depending on your distro
Lionel
---
Emmanuel writes:
On 2003.06.20 18:10, Christoffer Dahl Petersen wrote:
fre, 2003-06-20 kl. 14:31 skrev Emmanuel:
All these options are commented out by the leading #. You just
have
to remove it to active the option. Moreover several of this option
takes an argument (the
This message is in my XFree86.log Can someone tell me
what this means and how to correct?
Thanks,
AUDIT: Sun Jun 22 07:33:20 2003: 3170 X: client 4
rejected from local host
__
Do you Yahoo!?
SBC Yahoo! DSL - Now only $29.95 per month!
http://sbc.yahoo.com
respected sir/madam
i have purchased Redhat Linux 8.0 cds i have install to my system.
my system didn't detect the monitor to gui but it detect in the text mode so i want
the solution to interface to GUI to my system please give the solution
my system monitor is Samsung SyncMaster 753s 17''
my
respected sir/madam
i have purchased Redhat Linux 8.0 cds i have install to my system.
my system didn't detect the monitor to gui but it detect in the text mode so i want
the solution to interface to GUI to my system please give the solution
my system monitor is Samsung SyncMaster 753s 17''
my
respected sir/madam
i have purchased Redhat Linux 8.0 cds i also install to my system.
my system didn't detect the monitor to gui but it detect in the text mode so i want
the solution to interface to GUI to my system please give the solution
my system monitor is Samsung SyncMaster 753s 17''
my
respected sir/madam
i have purchased Redhat Linux 8.0 cds i also install to my system.
my system didn't detect the monitor to gui but it detect in the text mode so i want
the solution to interface to GUI to my system please give the solution it will hanging
as well as not any action please give
respected sir/madam
i have purchased Redhat Linux 8.0 cds i also install to my system.
my system didn't detect the monitor to gui but it detect in the text mode so i want
the solution to interface to GUI to my system please give the solution it will hanging
as well as not any action please give
Dear Users and Experts,
my machine has the following problem. When I exit XFree86
(configured with Xinerama) the second screen becomes inaccessible and
the display manager (kdm) does not redisplay its window. Moreover, the
system does not accept ssh connections. However, if a ssh is
I have a problem while i try to start XWindow
During the red hat installation i cannot install in graphic mode because
XWindow fail start.
I have installed red hat in text mode and now i have this problem.
Good work.
XFree86 Version 4.3.0 (Red Hat Linux release: 4.3.0-2)
Release Date: 27
Title: Help enabling X extensions, Xrunner program
I am trying to get my X test suite running on RedHat 9.0/XFree86 4.3.0 on an IBM 225 eServer (Xeon) w/ onboard ATI Mach64 card.
Currently I have added Load lines to the Module Section of my XF86Config file, however I cannot seem to get
Hello,
I've received the info, that the version 4.2.99 (the last before 4.3.0)
could help to solve the problem with my ATI Rareon card.
Can sombody give me a hint / link to find this version of XFree86 ?
thanx in advance
oTTo JmgRunD
___
XFree86
Do things change if you start with X -ac ?
Mark.
On Sun, 22 Jun 2003, Stephane Corbe wrote:
Hello,
I tried to upgrade from 4.3.0 to the cvs snapshot, but I have problem :
I started X just by typing X so I have the X background and the mouse.
From another
On Sun, 22 Jun 2003 [EMAIL PROTECTED] wrote:
This message is in my XFree86.log Can someone tell me
what this means and how to correct?
Thanks,
AUDIT: Sun Jun 22 07:33:20 2003: 3170 X: client 4
rejected from local host
It means the X-server denied a particular XOpenDisplay()
request
You need to upgrade your XFree86 version to 4.3 OR you need to
use NVIDIA's binary Linux drivers which will work with your current
XFree86 version.
Mark.
On 22 Jun 2003, shanmugham senthil kumar wrote:
respected sir/madam
i have purchased Redhat Linux 8.0 cds i
My guess is that this would be a driver problem with the one
of the cards and is probably not a configuration issue. Which
screen is the primary? Ie, which screen does the machine boot
up on? If you can go into your motherboard bios and switch
those around, you may have better luck with it.
I guess I'm not clear as to what an unauthorized
client is.
Is this something I need to correct? Never happened
before.
Thanks,
--- Mark Vojkovich [EMAIL PROTECTED] wrote:
On Sun, 22 Jun 2003 [EMAIL PROTECTED] wrote:
This message is in my XFree86.log Can someone tell
me
what this means
Any client which wants to talk to the server needs to have
authorization to do so. X is a network transparent window system
and it's what keeps *me* from popping windows up on *your* server.
It also keeps other processes on your system (potentially owned
by other users) from displaying or
I am desperately in need of help. I have the following set up
++ ++++++
| A | ssh | B | ssh| C | ssh | D |
++ ++++++
a and D are both on private networks and can't talk to each
I write the new parameter in the XFreee86. config file, but the not start
and the font for the screen change to blue coulor.
Do you have what the parameter is correct for the BusID for my card?
Thanks
XFree86 Version 4.3.0 (Red Hat Linux release: 4.3.0-2)
Release Date: 27 February 2003
X
I cannot get startx or any GUI to work. When I type startx my monitor
shuts off and my computer freezes. I can't reboot it or anything -- the
only way to get out of it is to manually turn the computer off. I tried a
different monitor and that made no difference. I'm running Mandrake 9.1 on
my system configuration is as follows :
intel pentium 4 1.7 Ghz
256 mb ram
nvidia riva tnt model 64 / model 64 pro
acer ac711 17 " monitor
genius netscroll + ps/2 mouse
plz help me ... my xserver crashes
the full bug report is attached
Do you Yahoo!?
SBC Yahoo! DSL - Now only $29.95 per
The problem lies with the Nvidia nforce chipset utilised with the Asus A7n266-VM motherboard. I have the same mobo and am using the same version of Redhat Linux. To fix this problem you need to first install in text mode, taking care NOT to install/setup the Xserver first. Then, get hold of audio
Title: How to reduce the size of XFree86 in RedHat 9?
Hi, All
I want reduce the size of X in RedHat 9. My idea size is about 30M with fvwm. Somebady tell me, I can just keep the lib bin folder in the /usr/X11. But the size of the two folders is about 90 M.
Can you give me any information
I think the best way for you is finding out and setuping the nvidia driver from the
www.nvidia.com.
wish it can help you. 8-)
Tom
-ì©l?¥ó-
?¥ó¤H: firoz [mailto:[EMAIL PROTECTED]
?°e??: 2003¦~6¤ë23¤é 11:15
¦¬¥ó¤H: [EMAIL PROTECTED]
¥D?: [XFree86] xserver crashes
my system
Someone else on this list seemed to have the exact same problem...
When I try to start X with DRI, I get a black screen. I can telnet in from a
different host, though, and through that I see that X is taking 100% cpu
time. When I SIGKILL X, the computer halts.
http://ioioio.net/XF86Config
XFree86 Version 4.3.0 (Red Hat Linux release: 4.3.0-2)
Release Date: 27 February 2003
X Protocol Version 11, Revision 0, Release 6.6
Build Operating System: Linux 2.4.20-3bigmem i686 [ELF]
Build Date: 27 February 2003
Build Host: porky.devel.redhat.com
Before reporting problems, check
On Sun, 22 Jun 2003, firoz wrote:
my system configuration is as follows :
intel pentium 4 1.7 Ghz
256 mb ram
nvidia riva tnt model 64 / model 64 pro
acer ac711 17 monitor
genius netscroll + ps/2 mouse
plz help me ... my xserver crashes
You don't have a NVIDIA chip you have an SiS
On Mon, 23 Jun 2003 [EMAIL PROTECTED] wrote:
I think the best way for you is finding out and setuping the nvidia driver from the
www.nvidia.com.
wish it can help you. 8-)
Won't help, since according to his log, he doesn't have an NVIDIA chip.
The stock XFree86 would have worked fine if
On Mon, 2003-06-23 at 08:44, firoz wrote:
my system configuration is as follows :
intel pentium 4 1.7 Ghz
256 mb ram
nvidia riva tnt model 64 / model 64 pro
acer ac711 17 monitor
genius netscroll + ps/2 mouse
plz help me ... my xserver crashes
I have had most success by changing the
On Sunday, June 22, 2003 10:55 pm, root wrote:
nothing :^(
Your log doesn't indicate any error. Probably what's happening is X is
starting successfully but whatever program it's trying to run either doesn't
exist or exits/crashes immediately.
Try this:
startx $(which xterm)
This ought to
37 matches
Mail list logo