CVSROOT:/home/x-cvs
Module name:xc
Changes by: [EMAIL PROTECTED] 03/11/24 08:19:53
Log message:
SiS driver:
- Don't load DRI by default on 315/330 series; solves the problem of
unresolved symbols for people who had glx and GLcore not loaded and
DRI
CVSROOT:/home/x-cvs
Module name:xc
Changes by: [EMAIL PROTECTED] 03/11/24 08:26:54
Log message:
SiS driver:
- Refine previous patch: Load DRI module by default only on 300 series,
not on others.
Modified files:
CVSROOT:/home/x-cvs
Module name:xc
Changes by: [EMAIL PROTECTED] 03/11/24 11:08:53
Log message:
SiS driver:
- Fix panning in 1400x1050 mode (and other modes with horizontal resolutions
which aren't a multiple of 8) on CRT2
- Cleanup
Modified files:
Hi,
On Thu, 20 Nov 2003, Mark Vojkovich wrote:
Current XAA only supports rendering to a single surface where the
location to draw at is indicated by pDrawable-x and pDrawable-y.
Yeah, I figured that too after staring at the xaa sources for a day ;-)
Hmm.
It doesn't know anything about
On Mon, 2003-11-24 at 00:31, Alex Deucher wrote:
The attached patch converts radeon_video.c to use the CP rather than
MMIO if direct rendering is enabled. I wanted to get some feedback
before committing to DRI cvs. I doubt this will affect overall
performance much, but it will reduce the
Hi again!
We're going to switch into the __GNU_userland__ macro for GNU/K*BSD systems.
Please could you apply this tiny patch so that both the old and new scheme
are supported:
--- xc/config/cf/Imake.cf.~3.86.~ 2003-11-24 03:02:26.0 +0100
+++ xc/config/cf/Imake.cf 2003-11-24
Hi!
Just in case you want something to put in the OS-Support section of RELNOTES
about the recent fixes for GNU/Hurd, GNU/KFreeBSD and GNU/KNetBSD. I suggest:
--- xc/RELNOTES.~1.21.~ 2003-11-21 06:49:53.0 +0100
+++ xc/RELNOTES 2003-11-24 16:48:53.0 +0100
@@ -215,6 +215,10 @@
I was wondering if we could make some use of the VESA VGA extension, to set
video modes at least. That would eliminate all of the video mode problems,
such as bad offsets, out of sync, and scanline problems. The VESA standard
covers everything the XVidMode extension does, but does it more
On Mon, Nov 24, 2003 at 09:19:01PM +, Raymond Jennings wrote:
I was wondering if we could make some use of the VESA VGA extension, to set
video modes at least. That would eliminate all of the video mode problems,
such as bad offsets, out of sync, and scanline problems. The VESA standard
So if I got the latest version, and decided to change video modes, would it
use VESA?
From: Alan Hourihane [EMAIL PROTECTED]
To: Raymond Jennings [EMAIL PROTECTED]
CC: [EMAIL PROTECTED]
Subject: Re: Could the VESA BIOS be of assistance? (ID 20311056 ignore this
filter)
Date: Mon, 24 Nov 2003
The 'vesa' driver is just like any other driver. If you use the 'vesa' driver
then it will change video modes using the VESA BIOS. Note that you won't
get any acceleration from this driver. One problem with using the BIOS is
that your set in the fixed modes provided by the BIOS. Some people like
On Mon, Nov 24, 2003 at 09:19:01PM +, Raymond Jennings wrote:
I was wondering if we could make some use of the VESA VGA extension, to set
video modes at least. That would eliminate all of the video mode problems,
such as bad offsets, out of sync, and scanline problems. The VESA standard
On Mon, 24 Nov 2003 21:46:09 +, Raymond Jennings wrote:
Could you fudge it so that the VESA driver just sets standard modes and
passes custom modes and all other requests to the default driver? That way
you wouldn't miss out on any acceleration. I was talking about only using
VESA to set
On Mon, Nov 24, 2003 at 08:09:13PM -0800, Ping Cheng wrote:
I think I can get rid of xf86Optrec.h in my code. But, data passing between
wacom driver and xserwacom, a user space app,is required to enable the user
with live function changes.
Can you give an example of how this is used?
Do you have
Hello folk!I'm trying to implement two
independent USB keyboards in a X. Normal keys are working as I expected,
but I found some problems with modified keys (shift, alt, ctrl).
If I use a modified key in one keyboard, it affects the other keyboard's
action. Caps_lock, Num_lock are working
I would never commit any thing non-trivial with out some validation
first. that's why I posted it here. Thanks for your comments.
Alex
--- Michel D�nzer [EMAIL PROTECTED] wrote:
On Mon, 2003-11-24 at 00:31, Alex Deucher wrote:
The attached patch converts radeon_video.c to use the CP rather
I18n becky
Got money problems
High interest cost got you down
We can help
We have programs for any credit situation
www.iveer.com/?21065
melcher
to exclude please
www.iveer.com/goodbye.asp
Gwendolyn Woodard
Arrgh. you were right :) I wrote Buttons 7 instead of
Buttons 7 :)
Anywho after I set that the extra buttons behave weired -- the
scroller doesn't scroll up/down, I guess I just need to do some
configuration tweaking. Thanks.
David Dawes wrote:
On Sun, Nov 23, 2003 at 09:56:16PM
Alon Weinstein [EMAIL PROTECTED] writes:
Arrgh. you were right :) I wrote Buttons 7 instead of
Buttons 7 :)
Anywho after I set that the extra buttons behave weired -- the
scroller doesn't scroll up/down, I guess I just need to do some
configuration tweaking. Thanks.
Most
Title: New Document
Désinscription : Si vous ne désirez plus recevoir de
Hi all,
I have a problem I'd like to ask your opinion about.
I've been putting together a diskless X terminal and since I
had a lot of monitors lying around I put in 3 identical video
adapters ( S3 - Trio64 - PCI - 1 MB ) so I could make it a
triple-head xinerama terminal :))
Using
Title: New Document
Désinscription : Si vous ne désirez plus recevoir de
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Anywho after I set that the extra buttons behave weired -- the
scroller doesn't scroll up/down, I guess I just need to do some
configuration tweaking. Thanks.
I've the same mouse model and it's similar configured like yours. Buttons 6
and 7
I have installed Gentoo on my Medion MAM2020 notebook. It uses S3 Savage
chip. When I set driver to savage the screen fickers (yes, LCD screen
fickers!), while changing it to vesa makes it OK.
Here is XF86Config extract:
Section Monitor
Identifier lcd
HorizSync 31.5-48.5
We're building a cluster with a bunch of dual DVI nVidia cards. The first port on each
card is plugged into a KVM. The second port
is plugged into a stereo projector. Our system guys want to retain the VGA console on
the KVM port--no X. At the same time we want
to run X on the projector. The
I have a simliar problem with a syncmaster 763mb and X where I get flickering from other electrical interference. It almost seems that the frequency isn't set correctly. My XF86Config file has a range which is correct for the monitor. How does Xfree86 determine the needed freqency and how do you
Peppe wrote (in a message from Sunday 23)
How to compile cvs? I do xmkmf xc, but I get:
imake -Ixc/config/cf -DTOPDIR=xc -DCURDIR=.
imake: No such file or directory
imake: No description file.
Read http://www.xfree86.org/current/BUILD.html first.
Executive summary for the impatient
Tyler Parrott wrote (in a message from Monday 24)
Hey all,
I'm currently trying to install X on my Gentoo system but I'm running into
a problem. I'm using emerge to compile Xfree.
There error I get is:
final link failed: no space left on device
Hmm, it looks like one of your
Hello.
I have a HD-2000 HDTV PCI card. When using the XVideo extension to
display HDTV format video, the right third of the image is a pink bar.
I have looked through the driver source and noticed that although the
maximum image size in radeon_video.c is 2048x2048 , the offscreen image
size
Hello,
I've been having a nasty freezing problem with my Linux PC and Radeon
9600 Pro based card, Sapphire Radeon 9600 Pro Atlantis Ultimate Edition,
to be exact.
Unless I have Option XaaNoScreenToScreenCopy in XF86Config-4, I get a
freeze, the kind that needs the reset button. With XFree86
If you get this going please let me know. I have submitted reports to XFree86
but so far they have all been ignored ! It appears that there are some
Logitech mice for which X see no button events at all beyond 1 2. I have a
variety of Logitech wheel mice. The only one that works with the
Hello,
Im newbie in Debian, and Im trying to
configure Xfree. But I dont understand how to set up my Flat Panel 1800
FP (Dell), with my Nvidia graphic card. It seems to be so difficult for me. Can
you help me please ?
Regards,
Alex
FYI, the nv driver that comes with XFree86 didn't support
the DVI interface until XFree86 4.3.0, so if you're using something
older than 4.3.0, it's not going to work.
Mark.
On Tue, 25 Nov 2003, Alexandre Morales wrote:
Hello,
I'm newbie in Debian,
RE: Sell cookware, tableware and look for partner in very country
Our company is located at Guangzhou, China
establishing in 1996. It has many years of experience in producing
kitchenware, tableware and cookware including non-stick frying pan, kettle, spice
containers,
mesh net basket,
Greetings, whoever is willing to help...
I've just installed Woody, which came with XF86. Almost everything's fine
except for the X system. I type startx and get errors saying: No devices
detected and Fatal server error: no screens found. I do not understand
what the problem could be. My video
Hello folk!
I'm trying to implement two independent USB keyboards in a X.
Normal keys are working as I expected, but I found some problems with
modified keys (shift, alt, ctrl).
If I use a modified key in one keyboard, it affects the other keyboard's
action.
Caps_lock, Num_lock are
Please excuse my bad english
I can see fine the tv, but only with a resolution of 800x600 if i change
my configuration to 1280x1024, I see in the the tv a fragment ( 800x600
) of a 1280x1024 total size.
How i can have 1280x1024 in the monitor and 800x600 in the tv ???
Here is my xf86config
37 matches
Mail list logo