CVSROOT:/home/x-cvs
Module name:xc
Changes by: [EMAIL PROTECTED] 03/11/27 16:49:18
Log message:
Development - 2003/11/27 - XFree86 4.3.99.17
* correct wrapping logic for line-drawing characters written in
non-UTF-8 mode of xterm
1. aiptek not working in absolute mode
I used evtest /dev/input/event2 and verified I am getting absolute x,y, and
reset messages. (not sure what a reset message is) however the cursor is
still relative in x (i.e. unusable) even though the Xserverlog says
absolute, and it's configed absolute.
Kambo Lohan wrote:
1. aiptek not working in absolute mode
I used evtest /dev/input/event2 and verified I am getting absolute x,y,
and reset messages. (not sure what a reset message is) however the
cursor is still relative in x (i.e. unusable) even though the Xserverlog
says absolute, and it's
I have a epia M1 with Gentoo, kernel 2.6.0-test9, xfree 3.99.16 and a
DVB-S card.
I can see tv with xawdecode using xv and surfaces 4:2:0 but if I try tvtime
which uses 4:2:2 I see the image distorted:
Seems like the two halves overlapped, combining in only half witdh of the
screen.
For
On Wed, Nov 26, 2003 at 12:27:26PM -0500, David Dawes wrote:
With the new IPv6 code, clients connect to IPv4 addresses using AF_INET6
with the compatibility address ':::a.b.c.d' where a.b.c.d is the IPv4
address.
I noticed this while trying to figure out why connections from a
FreeBSD 5.1
Saven Inkjet Inks 20% OFF NOW!!! :-)
Beijing Saven Times Digital Technology CO., Ltd is specialized in producing
Piezo Solvent based durable inks for super wide and grand format inkjet
printers
all around the world. We are the one of the largest
On Thu, Nov 27, 2003 at 06:33:47PM -0500, David Dawes wrote:
On Wed, Nov 26, 2003 at 12:27:26PM -0500, David Dawes wrote:
With the new IPv6 code, clients connect to IPv4 addresses using AF_INET6
with the compatibility address ':::a.b.c.d' where a.b.c.d is the IPv4
address.
I noticed this
Try libpam
- Einar
onsdag 26. november 2003, 11:01, skrev Joshua Brickel:
Hi,
When I tried to install Xfree86 version 4.3 the installation failed with
a message that it could not find the pam_appl.h file. I am using debian
3.0. I was wondering if anyone knows what library this is
Greetings,
I am working on a video project and have hit a problem. The system is
based on RH7.3, Xfree 4.2 and a custom kernel based on 2.4.21. Most of
the time things are fine. Sometimes, however, when a button is clicked
(with a mouse) which should cause a screen to change, nothing happens
Hello all!
Is anybody able to advice me on how to correctly configure my ATI Radeon
7500 Card for XFree on RH9?
I'm working with it, but I noticed that the graphics displayed by XFree
are a bit out of focus...
What's wrong? It wasn't so with my old GeForce2 MX-400 card...
Thanks for any help!
Hi!
Is it possible to get 3d acceleration with a ATI 3D Rage Pro Turbo and
the 2.6.0-test9 kernel???
Everything i find seem to be made for kernel-2.4.X only ;(
//Nicklas Haraldsson
___
XFree86 mailing list
[EMAIL PROTECTED]
Hi,
we are attempting to use a i810 graphics chip with a 320x240 LCD display.
X11 works fine when we connect a monitor, but we only get a white
display on the LCD.
According to the XFree86 log file the clock range is:
XFree86 Version 4.3.0
Release Date: 27 February 2003
X Protocol
Greetings,
I am working on a video project and have hit a problem. The system is
based on RH7.3, Xfree 4.2 and a custom kernel based on 2.4.21. Most of
the time things are fine. Sometimes, however, when a button is clicked
(with a mouse) which should cause a screen to change, nothing happens
Dear,
I need a support to install a HW SIS 300 video driver in my ccomputer with
Linux HadRet 9.0.
I'm sending a log file named XFree86.0 with information when I start my
computer.
Thanks for all.
Esio
_
MSN Hotmail, o maior
Ive hit a snag converting a HP pavilion 4145 to
RedHat 9. The 2 issues I have are PCMCIA not loading and graphicial desktop not
loading due to no screen found. The PCMCIA device is a 02Micro OZ6912 Cardbus
controller and im still digging to find something on the TFT LCD display for it
comes
Hi,
I'm using KDE 3, XFree86-4.3.99.16 on a VIA Nehemiah M1, Linux 2.4.22. I
needed to upgrade to snapshot 16 to get the VIA graphics going, however, I
cannot any more select keyboards. I normally switch between US and NO
keyboards. I had the same problem with snapshot 14 and 15.
Any idea
Hi folks..
I'm using two keyboard with single X. As far as I know, xkb extension
controls keyboard events. It also maintains status of keyboard.
(modifier, Locking.. etc)
If I use two keyboard at the same time in single X, modifiers key events
affect the other keyboard's status. Am I right?
I`m trying to install redhat 9 on a Compaq presario 900us, but the x windows
doesnt work...what can Ido?
___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86
Edward Wagner Jr. wrote:
I have a simliar problem with a syncmaster 763mb and X where I get
flickering from other electrical interference. It almost seems that the
frequency isn't set correctly. My XF86Config file has a range which is
correct for the monitor. How does Xfree86 determine the
Not at this time, however the work around I have been using is setting up more than
one layout in
my XF86Config. Then I write scripts for common apps/tasks that call the right
xSession and
layout.
I had a dream that apps would be free from persecution of color depth and of
screen/root
helo sir ...myself Anil .m using red hat linux from last 2 months ...but yesterday m
got a problem from which i am unable to get rid... the problem is that m X server is
unable to load the Error m got is .
(EE) failed to load module bitmap(module dosent not exist)
Fatal server error
21 matches
Mail list logo