you can try to XWarPCursor if ya want ... some WM's may not like this
behavior tho
- Original Message -
From: Indy [EMAIL PROTECTED]
To: devel@XFree86.Org
Sent: Friday, December 16, 2005 4:22 PM
Subject: grabbing the mouse cursor
I'm making a radically advanced help system for
I've seen this I believe in some ports ... I seem to recall permissions
being the issue ...
- Original Message -
From: Marc Aurele La France [EMAIL PROTECTED]
To: Stefan Strobl [EMAIL PROTECTED]
Cc: devel@XFree86.Org
Sent: Monday, October 24, 2005 10:11 AM
Subject: Re:
by default the keepalive interval is 2 hours (rfc1122) I doubt this is what
you are looking for.
- Original Message -
From: Nick Hill [EMAIL PROTECTED]
To: devel@XFree86.Org
Sent: Friday, June 10, 2005 8:52 AM
Subject: SO_KEEPALIVE - a solution for where X servers are shut down?
The
-
From: Nick Hill [EMAIL PROTECTED]
To: devel@xfree86.org
Sent: Friday, June 10, 2005 12:29 PM
Subject: Re: SO_KEEPALIVE - a solution for where X servers are shut down?
Rob Currey wrote:
by default the keepalive interval is 2 hours (rfc1122) I doubt this is
what you are looking for.
If running
I installed xfree86 on fedora 2 and need to uninstall it to get my kde
desktop back. How do I uninstall xfree?
_
On the road to retirement? Check out MSN Life Events for advice on how to
get there!
I installed the binaries from Linux-ix86-glibc23 on a Fedora 2 system. All
worked well. But now I want to go back to my K Desktop Environment, and I
don't know how. How do I uninstall XFree86? or how do I log into KDE? Is
there a config file somewhere that controls what gets loaded? Thanks.
show me where my
search technique is deficient!
Cheers,
Rob Brown.
___
Devel mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/devel
, but can't see anything wrong, and all my MMIO_OUT32
writes into BRxx are correctly expanding into xf86WriteMmio32Le.
Have you ever seen anything like this before?
Thanks,
Rob Taylor
whoo! fixed!
ok attached are my initial diffs, i'm gonna do soem work to clean
this up, cos there are a number
one way to do what you want (from kernel space) is to use the kernel
framebuffer driver for writing graphics, and use up one of the VT's for your
debugger, switching to that vt when doing, umm, whatever your doing
I have to ask tho, whats wrong with kgdb?
-Original Message-
From:
. the line
'BASE0 0xfa00 addr 0xfa00 MEM'
disappears from scanpci -v)
odd.
Luckily i can just work around this using NoINT10 :)
Onwards!
Rob Taylor
Senior Developerrobt at flyingpig dot com
Flying Pig Systems http://www.flyingpig.com
Please avoid sending me Word or PowerPoint
Egbert Eich writes:
Rob Taylor writes:
Has anyone sucessfully run the chips 69030 driver on powerpc
based systems?
I'm trying to get it running on a custon 7410 based board
with two 69030's
on,a nd i;'m seing soem off things:
my /proc/pci gives me that:
Bus 0
Tim Roberts writes:
On Thu, 23 Oct 2003 17:16:19 +0100, Rob Taylor wrote:
Has anyone sucessfully run the chips 69030 driver on powerpc
based systems?
I'm trying to get it running on a custon 7410 based board
with two 69030's
on,a nd i;'m seing soem off things:
...
Also
information, or have i got the wrong end of the stick?
Also does anyone know the reason for the addition of 0x80 to the base
address in the big-endian case?
Thanks to anyone who can spread some light on this for me!
Rob Taylor
Senior Developerrobt at flyingpig dot com
Flying Pig Systems http
think
it was 23, I see now that extract is a different size in each of the
subdirectories.)
reran: sh Xinstall.sh -check
got the a.out message, called for help.
Thanks!
- Original Message -
From: Mark Vojkovich [EMAIL PROTECTED]
To: Rob [EMAIL PROTECTED]
Cc: [EMAIL PROTECTED]; [EMAIL
There are 3 sets of Linux binaries, each for the different
generations of C libraries. You'll want to use the
ones that matches the version of your /lib/libc-X.X.so.
Which libc do you have?
/lib/libc-2.2.4.so
thanks
___
XFree86 mailing
/lib/libc-2.2.4.so
I believe that means you want to get all your binaries
from the /pub/XFree86/4.3.0/binaries/Linux-ix86-glibc22 directory.
Did that already while I was waiting for a response.
Actually I copied Xinstall.so and extract, from each of the
/pub/...glibc2x directories one
1998 vintage pc with win98, dual boot to
Linux.
X would not work on this pc because: 1) 64m shared
ram (cpu and video), 2) mandrake min rqmts were 64m ram plus 2m ram on video
card. Original video is onboard SiS597/598. (Actually it's the
desktop application (gnome, kde, etc), it works, it
I copied all the binaries and subdirectories from XF86.org release 4.3 to a
cd (took about 2 hours).
copied Xinstall.sh (from the common subdirectory) to a temporary directory
under root (/root/jrmtemp).
ran: sh Xinstall.sh -check from that temporary directory.
Got an error message saying I
Anyone? Someone has to know how to do this.
- Original Message -
From: Rob Taft [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Friday, August 15, 2003 5:00 PM
Subject: [XFree86] Japanese fonts
Hi, I'm trying to get Japanese fonts working without the X Font Server.
The
seem to work
Hi, I'm trying to get Japanese fonts working without the X Font Server. The
seem to work fine with the font server, but I need to get it working without
going through the font server. This is the section I am concerned with:
Section Files
RgbPath /usr/X11R6/lib/X11/rgb
# Multiple FontPath
The screen goes black and the X process takes 99% of the cpu.
Happens a few times a week.
I attached the Xfree86.log
Any help would be greatly appreciated.
Regards,
Robert Iaboni
Systems Administrator
Waterfront International Ltd.
Tel: 416-368-6500
E-mail: [EMAIL PROTECTED]
XFree86.0.log
Surely it'd be less difficult nowadays, with the job market in its current
state?
Rob
On Tue, 15 Jul 2003, Alex Deucher wrote:
This proposal comes up periodically on this and other xfree lists, but
never really goes anywhere. Why not raise money from the open source
community to fund
Hi
When I try to compile any software I get a error.
ERROR: /etc/x11 exists, but is not a symlink to /usr/x11r6/etc.
Then the install fails and cant install, any ideas
Rob
[EMAIL PROTECTED]
___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86
Not sure what happened... it just segfaulted. Everything seemed totally
fine, when X just suddenly disappeared.
Anyway, here's the log.
XFree86 Version 4.3.0 (Red Hat Linux release: 4.3.0-2)
Release Date: 27 February 2003
X Protocol Version 11, Revision 0, Release 6.6
Build Operating System:
fails.
Any hints about what I am doing wrongly would be most welcome.
Thanks
Dr Rob C W Henderson
Department of PhysicsLancaster University
Telephone : 01524 593617
___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo
development to get together, plan out some work, log bugs/features in
bugzilla and then do some coding.
I'm interested in making it work with xinerama, whats your interest?
Rob Taylor
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf
Of Robert Woerle Paceblade
obsoletes the Cyrix driver for
the Cyrix MediaGX ?
greetings,
Rob van Nieuwkerk
___
Devel mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/devel
cursors, no?
Anyhow, thanks for the solution! Its a shame that X isn't going to be able
to cope with multiple focus trees, but I agree the issues are many, and the
need little...
Rob
___
Devel mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman
Noted the other day that RandR explictly doesnt initialse when panoramix is
on. Whats the issue? are there fundamental probelems with using the two
together, or is there just some work left to do? I've probably got some time
to throw at it if its just a matter of code.
Thanks,
Rob Taylor
in Xfree86.
Another concrete example is when implementing a collaborative decktop in
whcih you want a separate pointer for each of the users remotely viewing
that desktop.
Yours,
Rob Taylor mailto:[EMAIL PROTECTED]
FPShttp://www.flyingpig.com
-Original Message-
From: [EMAIL PROTECTED
this problem, but much
elation once it was found.
Enjoy
Rob Morris
X-Video Extension version 2.2
screen #0
Adaptor #0: video4linux
number of ports: 1
port base: 61
operations supported: PutVideo
supported visuals:
depth 24, visualID 0x23
depth 24, visualID 0x24
depth
Depth 24
Modes 1280x1024 1024x768 800x600
Option Overlay
Visual TrueColor
EndSubsection
EndSection
Any advice? Can XF4.2 run 8bit apps in any way?
Thanks,
Rob
___
Xpert
fix it in X 3.3.6, but all attempts have been
unsuccessful under X4.2.
Clear Skies,
Rob Clark
On Fri, 12 Jul 2002 11:07:56 +0200 (MEST)
volker [EMAIL PROTECTED] wrote:
hello everyone,
i didn't find anything about this in the archives, so i
hope someone can give me a hint:
i installed
be the resolve but
must be missing the boat somewhere.
Any help at this point is welcomed.
XF86Config File is listed below.
Thanks In Advance,
Rob
---
---
-
# File
Have you attempted to go through the setup process using /stand/sysinstall
to see if the X configuration gui comes up correct?
Also was this a fresh install or did you do an upgrade install? If upgraded
did you just cvsup the system and rebuild the source tree? Or did you do
the bootdisk
Actually you left quite a bit out..
When you setup X through /stand/sysinstall did it work when you attempted
to start it up? I mean the details in what your problem exactly is are
vauge at best..
I'm running 4.6 with the current version of Xfree installed by the base
system and other than
is crystal clear. If I remove the mouse from highlight
it goes into rather crap colors..
I've been searching for answers to this and thusfar have yet to
find any real answers. Anyone have any helpful suggestions?
X runs fine otherwise, I'd just like cleaner colors for my vid apps :)
Thanks.
Rob
umm, Adrian Cox ([EMAIL PROTECTED]) did some work on a multihead 69030
driver for my company a while back . I dont know if it ever got integarted into
the main tree, and AFAIK it may only work with our custom board ;-), but its
worth asking him about.
Yours,
Rob Taylor
-Original Message
I though i should point out that you already have a volunteer to set up a bug
database: Kurt Wall ( see
http://www.xfree86.org/pipermail/xpert/2002-May/017211.html ).
Yours,
Rob Taylor
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf
Of Mike A. Harris
This is all very well, but i sent patches to [EMAIL PROTECTED] nearly 3 weeks
ago and i've had nothing back apart from an automatic response! does *ANYONE*
read it?
Yours
Rob Taylor
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf
Of Dr Andrew C
the list archives but have been unable to find any references to this
specific laptop.
Any help greatly appreciated.
Thanks.
Rob
___
Newbie mailing list
[EMAIL PROTECTED]
*** To unsubscribe , or change message options, see:
http://XFree86.Org/mailman
I've seen bugs like this in the matrox drivers before. As i recall its a bug in
handling caching bitmaps in video memory (the cached bitmap is only accessible
to one of the pipes). try a newer matrox driver (from their site) if no luck
mail a bug report to matrox.
Rob
-Original Message
to bug reports..
Rob
I want to use dual touchscreen monitor to show the one application. But
I want to take input from both screen and at the same time different
part of the program can be seen in two monitors. Is it possible? How can
do that?
Thank you...
Are you saying you want
getting ahold of a
similar unit to try and reproduce can anyone comment on whether or not
it's been fixed?
Anyway thats the end,
Thanks
Rob
___
Xpert mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xpert
What program are you trying to run?
You might try from your terminal window to type the full path and binary
name.
For example from my machine if I wanted to open another xterm I could enter:
/usr/X11R6/bin/xterm
Rob
[EMAIL PROTECTED] wrote:
Hello, I am new to XF86. I am a Mac OS X User
previous post but I'm using NetBSD 1.5.2 this may
be relevant.
Thanks
Rob
At 09:11 PM 4/8/02 -0700, you wrote:
On Tue, 9 Apr 2002 [EMAIL PROTECTED] wrote:
Not sure where to send problem reports but I just want to point out an oddity in
the current xfree cvs co. The experimental support
.
Thanks
Rob
At 06:47 AM 4/9/02 +0200, you wrote:
On Mon, 8 Apr 2002, Mark Vojkovich wrote:
On Tue, 9 Apr 2002 [EMAIL PROTECTED] wrote:
Not sure where to send problem reports but I just want to point out an oddity in
the current xfree cvs co. The experimental support for the Nvidia GeForce2
The program x2x does just what you're looking for.
http://freshmeat.net/projects/x2x/?topic_id=861
This is available as a debian package in the debian distribution. Don't
know about other systems.
-Rob
On Fri, 2002-03-29 at 17:51, martin f krafft wrote:
could someone point me to a document
any suggestions on workarounds or fixes that you
might have. If someone wants the whole trace I'll send it to you, but
be warned that it is 12MB is its entirety.
-Rob Adams
close(7)= 0
munmap(0x401a1000, 4096)= 0
open(/usr/lib/X11/fonts/Speedo
In what configuration file should xset - commands be placed?
e.g. I normally prefer to run xset r rate but am sick of doing it by hand
what is the appropriate place to put this command so that it's loaded when x
starts?
Thanks
___
Newbie mailing
, the Xserver output, and
the complete output of xpdyinfo.
Also, please reply to me and to the list, since I am not subscribed to
the list.
Thanks,
Rob
/etc/X11/XF86Config-4
Section ServerLayout
Identifierdefault
Screen screen0
Screen screen1 RightOf screen0
InputDevice
it.
Thanks
Rob
If you feel this is a NetBSD specific problem you can sign up to the
tech-x11 mail list at www.netbsd.org it may yield a better response that
what your getting here.
Rob
- Original Message -
From: Randall Stewart [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Friday, February 22, 2002 12
in the future for the nvidia GeForce Go driver
for the Dell mobile?
Thanks for the reply.
Rob
- Original Message -
From:
Art Fore
To: '[EMAIL PROTECTED]'
Sent: Wednesday, February 20, 2002 12:01
AM
Subject: RE: [Newbie]Nvidia GeForce 2 Go
Mobile (Dell)
Yes
GeForce2, QUADRO2
NV11 NV15 (except GeForce2 Go, which is NOT supported)
So my original question stands is there planned support for the Go or not?
Where can I find out?
I appreciate the reply but I require a NetBSD solution NOT Linux.
Rob
- Original Message -
From: Art Fore
To: '[EMAIL
here's a context patch to make the default background black (i'm workinng on an
embedded device and the flash of moire was just too messy ;)
Rob
--- xc/programs/Xserver/dix/window.cMon Jan 28 15:45:50 2002
+++ xc.orig/programs/Xserver/dix/window.c Wed Jan 17 22:36:44 2001
@@ -114,12
in
the other part). In /var/log/XFree86.0.log I get timeout messages (see
at the end of the log file), but
these are not very informative. Any suggestions?
Regards
Rob
XFree86 Version 4.2.0 / X Window System
(protocol Version 11, revision 0, vendor release 6600)
Release Date: 18 January 2002
in
the other part). In /var/log/XFree86.0.log I get timeout messages, but
these are not very informative. Any suggestions?
Regards
Rob
XFree86 Version 4.2.0 / X Window System
(protocol Version 11, revision 0, vendor release 6600)
Release Date: 18 January 2002
If the server is older than 6-12 months
of XNextEvent.
Has anyone got any ideas why this isn't working? Could it be a window manger
issue?
Thanks to anyone who can help, this has me completely bamboozled!
Rob Taylor
___
Xpert mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo
And here is the output of xauth list:
c888746-a.attbi.com/unix:0 MIT-MAGIC-COOKIE-1
e0cae68d99242
Note that the /unix is not present in the session display name. I
wonder that is going wrong?
Thanks in advance for any help. Rob.
--
The Numeric Python EM Project
At 02:15 20/10/2001, you muttered something like:
Can't see nothing but quoting on your posts...
From: Joseph Slemp [EMAIL PROTECTED]
Sent: Friday, October 19, 2001 8:07 AM
- Original Message -
From: suresh grandhi [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Wednesday,
and it appears I'm doing it
right, but obviously I'm not.
Thanks,
Rob
- Original Message -
From: Rob Lofland [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Thursday, October 11, 2001 10:09 PM
Subject: Re: [Newbie] Radeon AIW + AMD 751 chipset
Well I have a motherboard with an AMD 761 and Radeon 32
fixes for AMD 761 agpgart support have gone in but unless you have more free
time than I do to fool around with it, I'd wait for a 2.4.10 distro to come
out. Maybe that will work. SuSE 7.3 is supposed to have it in mid-October.
Rob
- Original Message -
From: Sprague, IT3 [EMAIL PROTECTED
Anybody seen this ?
I attempt to "Make World and make install" 4.1.0
and I get a "Fatal Server Error". So I download and compile kernel 2.4.10 and
when I try to reboot, my PC crashes with:
loading labelnameBEDA
too big
What's this all about ?
Thanks,
Rob
at least get you going..
Rob
- Original Message -
From: Sprague, IT3 [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Sunday, September 30, 2001 10:59 PM
Subject: RE: [Newbie]trouble with 4.1.0?? (Radeon 32mb DDR/AMD Athlon/Asus
A7M266)
To answer your question on why the Radeon is listed
suggestions
would be appreciated.
Thanks,
Rob
This is a pre-release version of XFree86, and is not supported in any
way. Bugs may be reported to [EMAIL PROTECTED] and patches submitted
to [EMAIL PROTECTED] Before reporting bugs in pre-release versions,
please check the latest version in the XFree86
66 matches
Mail list logo