for this
behaviour.
Regards,
-Bharat.
On 6/11/07, Marc Aurele La France [EMAIL PROTECTED] wrote:
On Sat, 9 Jun 2007, Bharat Kumar Reddy wrote:
On 6/8/07, Marc Aurele La France [EMAIL PROTECTED] wrote:
On Fri, 8 Jun 2007, Bharat Kumar Reddy wrote:
I am tring to configure XFree86-4.6.0 for Radeon R250 M9
Binary/utility to generate XF86Config is xf86config located at
/usr/X11R6/bin/
Regards,
-Bharat.
On 11/30/06, Mike Kliem [EMAIL PROTECTED] wrote:
Hi..Im new to linux..
I have installed the Free86 binaries successfully from the Xinstall
script. However whe I try to run the XFree86 -autoconfig
Hello,
I had compiled XFree86-4.6.0 ( Including Tiny X server) for a Intel ARM
based board
I am using linux 2.6.13 and eldk 3.1.1 (Gcc 3.3.3) Tool chain
USB mouse is not working. After running Xfbdev if I move the USB mouse X
curser is not moving
I got error message as
Switching to mouse
Hi,
I had compiled XFree86-4.6.0 for ARM architecture.
If I run startX, I am getting the following Error
XFree86 Version 4.6.0
Release Date: 10 May 2006
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.11-1.1369_FC4 i686 [ELF]
Current Operating System: Linux Linux 2.6.13DZ
Hi,
I had compiled XFree86-4.6.0 for ARM architecture.
If I run startX, I am getting the following Error
XFree86 Version 4.6.0
Release Date: 10 May 2006
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.11-1.1369_FC4 i686 [ELF]
Current Operating System: Linux Linux 2.6.13DZ
Dear Sir/Madam,
This is Suneel from India, working as system
admin.
Recently I have installed FC4 and this the error I
am getting when starting the Xserver.
Please help me in this regard and let me know if
you need any thing else.
Waiting for your reply.
Thanks in Advance.
Best Rgds.,
Hello ALL,
I am trying to port XFree86 4.5.0 for PPC
architecture with one siliconmotion graphics card
But I am able to cross compile the XFree86 4.5.0
source with the command
make CROSSCOMPILEDIR=/home/opt/eldk/usr/bin
CROSS_COMPILE=ppc_7xx-
But I am finding that when we run Make world,
. But when we run the XFree86 for the PMC graphics
card we getting the following error
xf86OpenConsole: Cannot open /dev/tty0 (No such file or directory)
But we are found that the entry /dev/tty0 is available in /dev/ folder
Please help us.
Regards
Arun Kumar
Hello,
This is yogesh working in a private firm,developing an X environment
for custom made PMC board.but i not able to compile the XFree source.the
following is the error displayed when i run XFree -configure
i get 2 error messages
1)xf86OpenConsole: Cannot find a free VT
I started the machine as usaul, but i was not able to start the Xserver,
i don't know what's the problem
i found this log file
i am sending the log as attahment
please
sort out my problem
XFree86 Version 4.3.0 (Red Hat Linux release: 4.3.0-2)
Release Date: 27 February 2003
X Protocol
i have attached the error log file with this mail please refer it to solve my problem of failure in X window system. thanks.
Yahoo! Mail
Use Photomail to share photos without annoying attachments.
XFree86.0.log
Description: 4238048287-XFree86.0.log
my STARTX version is not working.please give me suggestion.Send instant messages to your online friends http://uk.messenger.yahoo.com Send instant messages to your online friends http://uk.messenger.yahoo.com
hi all,
I Have got one very simple doubt regarding X
windows system .Can we run X server on a system
without having any video graphics card.
I am having OMAP 5910
innovator kit . I have to run Xserver on it .So how to
go about it .
Regards
Sudhir
___
XFree86 mailing list
XFree86@XFree86.Org
http://XFree86.Org/mailman/listinfo/xfree86
Dear All,
I had received an offer from Mail. I want let u all know about it.
Please check the below links. I hope it will be helpful for u all.
Steps:
1. Copy the below link and paste it onto the address bar (or)
click the link.
Dear All,
I had received an offer from Mail. I want let u all know about it.
Please check the below links. I hope it will be helpful for u all.
Steps:
1. Copy the below link and paste it onto the
address bar (or) click the link.
Hai,
I have installed redhatlinux9.0 in a system.I not using the mouse
while using the graphical interface but still displaying the mouse
pointer.Is there anyway to hide the mouse pointer?please help me to
solve this issue.
regards,
K.Jeevan
Engineer-Network,
PaceAutomation Ltd,,
Chennai.
hi,
this is deleep kumar.n
i am unble to start my mandrake linux because of the following error
in this case when i am configuring the Xfree86.conf
i got this from var/log/Xfree86.log
WW I810(0) Bad V-bios check sum
how can i over come the same
regards
deleep
hi
my xserver is crashed due to unknown reasons
my pc configuration is P4 with 256 MB of ram and intel integrated graphics
card,i'm using redhat linux 9
i'm attching the log file please help me
sumit
(II) I810(0): Monitor0: Using hsync range of 30.00-55.00 kHz
(II) I810(0): Monitor0: Using
Hi,
I am a newbie in Linux. I encountered the following error when trying to configure the XWindows for my PC.
--
(II) Setting vga for screen 0.
(EE) VGA(0): Given depth (16) is not supported by this driver.
(II) UnloadModule:
Plz give me a solution urgent.
when is run 'startx' a fatal error is arise.That is
Fatal server error
Server is already active for display 0.if
this server is no longer running,remove /tmp/.X0-LOCK
and start again
When reporting a problem related to a server crash,
please send
the
i get a error which reads
Fatal Server Error
Server is already active for display 0
if this server is no longer running, remove
/tmp/.X0-lock
and again
xlib:connection to 0:0 refused by server
xlib:Invalid MIT-MAGIC-COOKIE-1 key
giving up
xinit:unable to connect to x server
xinit:NO such
i have red hat 7.2 and the other day i had a proper shut down but when rebooted it is giving the following errors i desporately need a solution
the following r the errors
i checked the configuration file
1 fatal server error could not open default font 'fixed'
2 fatal io error 104 (connection
Hi,
I am unable to start my X Server environment. I tried
using the Xconfigurator command and i was able to get
to the GUI environment momentarily but i am not able
to do startx.Ive attached the log file with the mail.
It would really help if you can provide some
information on resolving this
Dear sir,
I have an error message while finshinng Redhat 9 Installation." Fatal error No screens found ". Please help me . I mean linux doesnt probe the Philips monitor .
yours truly ,
vinodkumar
Do you Yahoo!?vote.yahoo.com - Register online to vote today!
the scanpci -v command to get the
information, the result of which is also attached in this
mail.
Please
suggest.
Vinod Kumar
(O): 949-716-8757
Extn:122
(M):
949-510-2959.
xfree86.0.log
Description: Binary data
scanpci result
Description: Binary data
hello sir in my system sound card not detected so
what can do fo this my soun card manufacture is VIA
=
Yahoo! India Insurance Special: Be informed on the best policies, services, tools and
more.
Go to:
message as attached
with this message.I can however textually login on my
system.
Plz suggest me to get the lost GUI(X server) back on
my screen...
Thnx,
Kumar Gaurav.
__
Do you Yahoo!?
Yahoo! Search - Find what youre looking for faster
http://search.yahoo.com
Dear sir/Madam
i compiled XFree86 4.3.0 version with XDirectFB
i made make World and make it works fine
when i did make install , it showed some error
error was No rule to make target date.def . need by
install .
But i searched date.def file in xc/config/cf but its
not there ..
OS :
OwnerGrabButtonMask. Is there any
other way to receive ButtonRelease event alone?
Is it neccessary to select ButtonPressMask also, in
order to receive ButtonRelease events. Thanks in
advance.
Regards,
Kumar.
__
Do you Yahoo!?
Protect your identity with Yahoo! Mail AddressGuard
Title: Message
Hi,
I have a UTF-8 coded
text and I have the ttf font file. I want to display this text in a window using
Xut8DisplayString(). How can I make sure that only this particular font file is
used for all the text.
Pranay
with an error.
Could you kindly look into this problem and let me know what can be done (if there is a solution to it)? I have included the log report generated as an attachment to this mail.
Also, please do contact me if you require any details regarding the problem.
Thanks in advance,
Regards,
Kumar Gaurav
-- Forwarded Message --
Subject: 69030 driver
Date: Thursday 11 Sep 2003 4:21 pm
From: Rishabh Kumar Goel [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
i m trying to write a MDA driver for CT's 69030 chip. The PCI card is memory
mapped. starting from 0x080 with the memory size
Light(LED) on the monitor to glow.
How to get that thing.
Regards,
Rishabh
On Thursday 11 Sep 2003 1:59 pm, Egbert Eich wrote:
You have to map 0xB - 0xC for that.
Egbert.
Rishabh Kumar Goel writes:
-- Forwarded Message --
Subject: 69030 driver
Date
Sir,
I've a PC with configuration; AMD Athlon XP 1700+,ASUS motherboard with
built in GeForce 2 MX display card etc. While installing Redhat 9.0 I faced
the following problems...
After booting with the Redhat 9.0 cd, in the GUI environment it seems small
square in the place of mouse pointer.
of 'scanpci -v' is attached in the file scanpci_v_output:
I hope you will provide to this genre of cards in near future
Regards
sandeep
--
Sandeep Kumar
Final Year UnderGraduate Student
Dept. of Computer Sc. Engg.
I.I.T. Guwahati.
email: [EMAIL PROTECTED]
[EMAIL PROTECTED]
pci bus 0x
Hi,
I jus Installed Redhat Linux 8 on my system. every
thing went normal while installing linux. after the
installation the system restarted. i configured it to
boot with Xwindow. but it showing some errors and
returning to command prompt.
the error is No Screen Found
my Video Card is S3 Trio
Hi,
I jus Installed Redhat Linux 8 on my system. every
thing went normal while installing linux. after the
installation the system restarted. i configured it to
boot with Xwindow. but it showing some errors and
returning to command prompt.
the error is No Screen Found
my Video Card is S3 Trio
Sir,
My pcq linux 8.0 has some problems so I submit the xfree86.0.log file to you. Please check out and send me information on what I must do.
This is the result I got in xfree86.0.logXFree86 Version 4.2.0 (Red Hat Linux release: 4.2.0-72) / X Window System(protocol Version 11, revision 0,
Sir,
I m using linux7.1 on sis650 chipset. I m not able to
configure my graphics. Plz help me to run Xwindows
system on my linux7.1 with sis650_740 graphics card. I
m sending the XFree86.0.log.
Waiting for ur helpful reply.
Thanx and regards...
Sanju Kumar
sir,
iam vinoth (india-tamilnadu) started working
in linux before two months (linux 7.0) now i have
installed redhat linux 9.0 in my system at the
beginig i have worked in the graphical mode but
suddenly a problem occured kindly guide me,
i have attached the bug report,
XFree86
I am not sure, but can you check the maximum resolution that you
rmonitor supports and the actual resolution that is configured in
XF86Config file?
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
Sent: Wednesday, June 25, 2003 1:57 AM
To: [EMAIL PROTECTED]
Subject:
respected sir/madam
i have purchased Redhat Linux 8.0 cds i have install to my system.
my system didn't detect the monitor to gui but it detect in the text mode so i want
the solution to interface to GUI to my system please give the solution
my system monitor is Samsung SyncMaster 753s 17''
my
respected sir/madam
i have purchased Redhat Linux 8.0 cds i have install to my system.
my system didn't detect the monitor to gui but it detect in the text mode so i want
the solution to interface to GUI to my system please give the solution
my system monitor is Samsung SyncMaster 753s 17''
my
respected sir/madam
i have purchased Redhat Linux 8.0 cds i also install to my system.
my system didn't detect the monitor to gui but it detect in the text mode so i want
the solution to interface to GUI to my system please give the solution
my system monitor is Samsung SyncMaster 753s 17''
my
respected sir/madam
i have purchased Redhat Linux 8.0 cds i also install to my system.
my system didn't detect the monitor to gui but it detect in the text mode so i want
the solution to interface to GUI to my system please give the solution it will hanging
as well as not any action please give
respected sir/madam
i have purchased Redhat Linux 8.0 cds i also install to my system.
my system didn't detect the monitor to gui but it detect in the text mode so i want
the solution to interface to GUI to my system please give the solution it will hanging
as well as not any action please give
Edit the file /etc/inittab and replace the line
id:5:initdefault: with
id:3:initdefault:
-Original Message-
From: Cynthia Grossen [mailto:[EMAIL PROTECTED]
Sent: Tuesday, June 17, 2003 8:23 AM
To: '[EMAIL PROTECTED]'
Subject: RE: [XFree86] Automatic GUI mode changing preferrence
'witchdesk' command worked
thanks
On Mon, 16 Jun 2003 Bharathi S wrote :
On 15 Jun 2003, Vijay Kumar wrote:
How should i configure KDE to come as default WM ?
Modify the ~/.Xclients-default file OR use switchdesk cmd.
'startkde' is the command to start the KDE WM.
Bye :)
--
Bharathi S
'switchdesk' command worked
thanks
On Mon, 16 Jun 2003 Bharathi S wrote :
On 15 Jun 2003, Vijay Kumar wrote:
How should i configure KDE to come as default WM ?
Modify the ~/.Xclients-default file OR use switchdesk cmd.
'startkde' is the command to start the KDE WM.
Bye :)
--
Bharathi S
Dear Sir
After successfull installation of Redhat Linux 8.0
i tried to reboot. But i was not able to see any GUI
coming. Manually i tried to run X Server , but i could not
run it.
The contents of the /var/log/XFree86.0.log are as follows
/XFree86.0.log .
kindly help me. I am a novice in Linux. I tried by
selecting cards 317(Generic VGA compatible and 695
-Unsupported VGA compatible). still it does not work
kindly give me a solution
with reagrds
anil kumar
Missed
Dear Support,
How to remove the closed bugs in my bugzilla database.
Note :
I have used the following:
OS : Redhat Linux
Bugzilla version : 2.16
database : mysql
expecting your precious help!
Best Regards,
Bharath.
___
XFree86 mailing list
[EMAIL
hi
i am using solaris 8 for intel platform, i don't have driver or patch for the display driver for sis 620 chipset. if u have any sugession for this kindly reply me.
Rgds
Senthil
Requst no: 817099Do you Yahoo!?
Yahoo! Tax Center - File online, calculators, forms, and more
Hi all,
My setup: Linux 2.4.18, X 4.2.0, Radeon 8500, gatos drivers for 4.2.0
exp 11
Everything works fine most of the time. Every now I then when I boot my
system, the DVI output on the LCD shows a lot of colored lines/bands.
They kind of fill the whole screen. When I run smething, that output
Hi,
Attahced is the report. My machine is Redhat AS 2.4.9
Regards
Rajendra
XFree86.0.log
Description: Binary data
EMAIL PROTECTED]."
Please let me know how to fix this problem.
I. Ram Kumar
Standard Electric AppliancesMfrs. VENUS Water Heaters
www.venuswaterheaters.com
EMAIL PROTECTED]."
Please let me know how to fix this problem.
I. Ram Kumar
Standard Electric AppliancesMfrs. VENUS Water Heaters
www.venuswaterheaters.com
XFree86.0.log
Description: Binary data
Hi all,
All I need to do is to playback video that is grater than 1920 in width
(specifically 2048). Need suggestions on which video card can do it. Xv
support on most cards seem to be limited to to 1920. I have tried ati
cards (radeon,8500/9700) and just checked the source for nv driver (it
says
Will any body please help me to select my monitor as sony cpd 1430 and to
set the refresh rate to 85Hz. Actually my monitor is vintron, which is not
in the database, but sony model is fine in windows, rh7, 7.1 and 8. Now I
migrated to debian, and it is not giving me an option to choose the
Hi! to all of you,
Recently I installed Redhat 8.0 on my system. The problem is I cannot work
on graphical mode. I have tried Gnome and Kde, but the problem persists.
It seems that the issue is basically with 'X' itself. The 'XFree86' version
is '4.2.0'. After trying many combinations, I
Hi all,
I have a strange problem using DVI on Radeon 9700 pro with a projector.
To check hardware and compatibilty I ran this setup on windows and it
works. My linux config:
- Kernel: 2.4.18
- X: xf-4_2_99_3
Now the DVI output works fine with my DELL FP but not with this
projector in linux. I
hi,
I'm attaching the error log with this message.
Please help me.
thanks in advance,
sujith
XFree86 Version 4.1.0 (Red Hat Linux release: 4.1.0-3) / X Window System
(protocol Version 11, revision 0, vendor release 6510)
Release Date: 2 June 2001
If the server is older than 6-12
hi,
I'm attaching the error log with this message.
Please help me.
thanks in advance,
sujith
___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86
Hello,
I have installed RedHat 8.0 on an HP Brio - Inetl PC.
It has a Intel 810 ChipSet.
Attached is the Xfree86 log file.
Can you please check it and help me to solve the problem.
Warm Regards,
Vijay Kumar
XFree86.0.log
Description: Binary data
Can anyone tell me how the exact X-system is working
in the low level.ie.how do we specify a screen in
X.like the specification of each pixel.
thank u in advance
kiran
Missed your favourite TV serial last night? Try the
Sir, can you explain the problem to me and specify a way to correct the
problem.
Thanking you.
Sandeep Kumar
Prefinal Yr. UG Student
Comp. Sc. Engg
IITG
India
XFree86 Version 4.2.0 (Red Hat Linux release: 4.2.0-72) / X Window System
(protocol Version 11, revision 0, vendor release 6600
I had the same problem: Xvideo will always remain on top even when focus
is lost. I switched to gatos drivers and they have no such trouble.
-PK
-Original Message-
From: [EMAIL PROTECTED] [mailto:xpert-admin;XFree86.Org] On Behalf
Of Warren Turkal
Sent: Friday, November 15, 2002 6:28 PM
I have the same problem with my setup. In fact I have a touch screen
connected. The keyboard just dosent work in X.
-Pranay
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf
Of Paul
Sent: Saturday, August 17, 2002 6:52 PM
To: [EMAIL PROTECTED]
Subject:
Andrew C Aitchison
Sanal Kumar [EMAIL PROTECTED] asked:
How to change the default visual from PseudoColor to
Static color in Xfbdev
What happens if you put the line
Visual StaticColor
into the Device Section of your config file ?
--
Dr. Andrew C. Aitchison Computer Officer
Hi keith,
We came across one of your mail thread where we find
there is some flaws in X when it comes to pseudocolor
manipulation.
http://www.xfree86.org/pipermail/render/2001-July/001191.html.
We are using Xfbdev in our arm target.when we use
xfree86-4.0.2, it comes in grey.But when we use
Hi All,
How to change the default visual from PseudoColor to
Static color in Xfbdev
TIA
Best Regards
Sanal
__
Do You Yahoo!?
Everything you'll ever need on one web page
from News and Sport to Email and Music Charts
http://uk.my.yahoo.com
As you look in the archives of his mailing list than
you can see that
there are at least three threads upon this subject.
The built-in RENDER module of the X server v4.2
allocates that much
colour in the colour map so that nothing is left for
other applications.
We installed v4.1 again and
Hi All,
I am working on an Assabet-like board with kernel
version 2.4.16.I am not getting a good colormap in
Xserver.But bootlogo works fine.what should i do to
get a pseudocolormap or whereshould i hack for getting
a good colormap.I just tried hacking fbcmap.c, but it
did not help in great
-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf
Of Iain Thomas
Sent: Saturday, May 25, 2002 7:26 PM
To: [EMAIL PROTECTED]
Subject: RE: [Xpert]Svideo out ATI
On Sat, 25 May 2002, Pranay Kumar wrote:
I would love to... but unfortunately I cant make a head or tail from
this page
Hi all,
I have a fujitsu C 6599 notebook.
It comes with ATI Rage Mobility P that has a VGA and SVideo out.
I am using Redhat 7.2 ( X upgraded
to 4.2.0 and ati.2 drivers). How do I get the Svideo
working??
Regards,
Pranay
Hi All,
I have a crosscompiled xfbdev working on sa1110
processor . It seems to work fine except for the color
display.The problem is that all the things appear in
black white instead of 8bpp color.I am using
Hitachi LCD(SX21v001-Z4A.)
2.4.16 kernel.
xfree86 4.0.2 source
Interestingly i
xvidtune I get a floating point exception. Why?
2) How do I check the refresh rate and the clock rate?
3) How can I run the two heads as sperate screens. I tried duplicating
the screen section in XF86Config-4 but no use.
---
Pranay Kumar
Email: [EMAIL PROTECTED
Hi All,
Is it possible to build KDrive with XLib, if so, please post any site url or any document related to do the same. Thanks in Advance.
Regards,Anand.Do You Yahoo!?
Yahoo! Greetings - send greetings for Easter, Passover
Hi,
I have been able to run the SVGA server ( the one in Xfree86 3.3.6,
that came along with redhat 6.2 ) with 800x600 (16bpp) 1024x768
(8bpp) modes on my cirrus logic 5434 with 1 mb vram.
However after my upgrade to redhat 7.1 and Xfree86 4.0.2, i have'nt been
able to get any 16 bpp modes
Hi,
I have been able to run the SVGA server ( the one in Xfree86 3.3.6,
that came along with redhat 6.2 ) with 800x600 (16bpp) 1024x768
(8bpp) modes on my cirrus logic 5434 with 1 mb vram.
However after my upgrade to redhat 7.1 and Xfree86 4.0.2, i have'nt been
able to get any 16 bpp modes
Hi,
I have been able to run the SVGA server ( the one in Xfree86 3.3.6,
that came along with redhat 6.2 ) with 800x600 (16bpp) 1024x768
(8bpp) modes on my cirrus logic 5434 with 1 mb vram.
this info is wrt Lionel's question:
ya, i deleted that XF86Config-4 as soon as i installed Xfree 4.0.2.
Hi,
I have been able to run the SVGA server ( the one in Xfree86 3.3.6,
that came along with redhat 6.2 ) with 800x600 (16bpp) 1024x768
(8bpp) modes on my cirrus logic 5434 with 1 mb vram.
this info is wrt Lionel's 1st 2nd questions:
ya, i deleted that XF86Config-4 as soon as i installed
Hi all,
I have a Matrox G450 PCI Dual Head (16M). I am running X 4.2.0 on kernel
2.4.13. X -configure detects only one head. Also the card is detected as
MGA G400 AGP. How can I get the other head to work.
Regards,
Pranay
_
Do You
I got no response last time I posted...
Hi all,
I use a Matrox G400 on X 4.1.0. I use Xv to put a Logo on a window and
then use XShmPutImage()[ RGB image using pixmap 24] to put my image. I
expected the Xv (overlay) to remain on top however that did not happen.
I thought overlay stays on top
I don't think any drivers are using RGB formats. Also, there aren't
unambiguous fourcc codes for RGB as far as I can tell.
Mark.
Current drivers do not use RGB but it might be helpful for future
development. Many people (including me and on this list as
Hi all,
I use a Matrox G400 on X 4.1.0. I use Xv to put a Logo on a window and
then use XShmPutImage()[ RGB image using pixmap 24] to put my image. I
expected the Xv (overlay) to remain on top however that did not happen.
I thought overlay stays on top of everything in a window.
If this is the
Hi,
The fourcc.h file does not contain any RGB formats. Is there any
particular reason for this??http://www.webartz.com/fourcc has standard
RGB formats defined as well. Why not include them for the next release.
Regards
Pranay
_
Do You
So what is faster: Opengl or XShmPutImage(). I have no idea about OpenGL
but I have programed in X before.
Pranay
-Original Message-
From: Michel Daenzer [mailto:[EMAIL PROTECTED]] On Behalf Of Michel
Dänzer
Sent: Sunday, November 25, 2001 8:23 PM
To: Pranay Kumar
Cc: Xpert Mailing
Thanks for the help. But I managed to solve this problem by using
WM_POROTOCOLS.
Pranay
-Original Message-
From: Mark Vojkovich [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, November 13, 2001 10:57 AM
To: Pranay Kumar
Subject: RE: [Xpert]Help: X programming
On Tue, 13 Nov 2001, Pranay
exit gracefully when the user closes the window?
Regards,
Pranay
---
Pranay Kumar
RD Engineer
GDC Technology
Fax: (852)23373566
___
Xpert mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xpert
Hi,
I have a Radeon and xvinfo gives me and Ximage size of 2048x2048. Is
this the largest size image I can scale? This post puts the fugure
around 1000 so I was confused. Further I have successfully tried
1920x1080 images but when I try to scale a 2048x1556 image I get a pink
band on the right
As far as I know only the glint drivers provide RGB formats for Xv.
Other cards do support RGB but the functionality has not been
implemented (I know this for ATI Radeon as Vladimir Dergachev pointed
out to me).
It would indeed help if Xv could be used to hardware scale RGB surfaces.
Pranay
93 matches
Mail list logo