On Sun, 29 Oct 2006, Mark Vojkovich wrote:
-Were the GLX or DRI modules loaded in this case? I still suspect
- a DRI or GLX bug, mostly because I haven't seen this with NVIDIA drivers
- which don't use the XFree86 dri or glx modules.
Yes, as this machine (the i810 one) didn't have
Here's the same type crash as was happening with the S3 VirgeDX chipset, only
this time on i810. No mention of glx module, but it was loaded. Two different
machines, same XFree86, 4.6.0. Both crashes only happen if X is left running
for over a day or so, then shut down. Once the server closes,
Were the GLX or DRI modules loaded in this case? I still suspect
a DRI or GLX bug, mostly because I haven't seen this with NVIDIA drivers
which don't use the XFree86 dri or glx modules.
Mark.
On Sun, 29 Oct 2006, jayjwa wrote:
Here's the same type crash as was happening
(If you missed it, I posted a few issues back about a strange crash, now I
have more info as to the cause and how to get out of it again.)
Yup, it is definately the glx module. Remove it and everything is OK. It won't
crash right away. I have to have X up for about 20 minutes and then close
On Tue, 17 Oct 2006, Mark Vojkovich wrote:
-Does omitting the glx module help? Perhaps the trace (which
- implies a segfault in __MESA_destroyBuffer unless I'm reading that
- incorrectly) is misleading and it would crash somewhere else if
- that module wasn't loaded. A new trace without the
On Mon, 16 Oct 2006, jayjwa wrote:
On Mon, 16 Oct 2006, Mark Vojkovich wrote:
-It looks like a problem related to OpenGL. My guess is this
- happened when cleaning up resources for an OpenGL app (like the
- screen saver) during shutdown. Does killing the screensaver while
- the server
This just started this morning, but I don't use this machine as much so
prehaps this may be due to a kernel upgrade?
Exiting X results in the screen locking, black, with just the pointer where I
left it. The command line is still usable, but the only way to get the display
back is a full
It looks like a problem related to OpenGL. My guess is this
happened when cleaning up resources for an OpenGL app (like the
screen saver) during shutdown. Does killing the screensaver while
the server is running produce the same problem?
To my knowledge the S3 driver doesn't support
On Mon, 16 Oct 2006, Mark Vojkovich wrote:
-It looks like a problem related to OpenGL. My guess is this
- happened when cleaning up resources for an OpenGL app (like the
- screen saver) during shutdown. Does killing the screensaver while
- the server is running produce the same problem?
hi
I am using linux-2.6.11 (uclibc) kernel with ati
framebuffer driver (RAGE XL).
When i am using Xserver on my normaly it started and
works, but it get crashed when moving windows on it,
and we cannot predict when it crash.At the time of
crash always get the debug message
debug atyfb:
Dear All,
I am using Red Hat Linux 9.0 with glib 3.3 and kernel
2.4.20-8 versions. The XServer crashed when I tried to read the contents of the
/dev/mem file and /proc/kmem file using the cat command inorder to retrieve the
contents of the physical memory.
As suggested in the kernel
Dear All,
I am using Red Hat Linux 9.0 with glib 3.3 and kernel
2.4.20-8 versions. The XServer crashed when I tried to read the contents of the
/dev/mem file and /proc/kmem file using the cat command inorder to retrieve the
contents of the physical memory.
As suggested in the kernel
hi,
i have been working on this for two days
reading and such
but to no avail
this is on a redhat 8.0 box
reloaded(through an upgrade) the system
without formatting, just trying to over write
i am able to logon to a shell prompt
but not able to start the xserver
can you tell me how to go about
This is a pre-release version of XFree86, and is not supported in any
way. Bugs may be reported to [EMAIL PROTECTED] and patches submitted
to [EMAIL PROTECTED] Before reporting bugs in pre-release versions,
please check the latest version in the XFree86 CVS repository
This is a pre-release version of XFree86, and is not supported in any
way. Bugs may be reported to [EMAIL PROTECTED] and patches submitted
to [EMAIL PROTECTED] Before reporting bugs in pre-release versions,
please check the latest version in the XFree86 CVS repository
hi !
i have xserver XFree86 Version 4.3.0 on RH9.0. it was working fine until i
happen to reboot the machine from terminal without exiting from the
xwindow. since then i am not being able to run xwindow. it prompts for
username and password as normal. but when both username and password is
Hi there,
after installing FreeBSD 4.7 on a P4 machine i tried to configure my
GeForce FX 5200 by downloading its driver from the NVIDIA website (and did
as they've specified). After installation of the driver, the startx command
ended by a crash : the output said that a card was found but was
The GeForce FX 5200 wasn't supported until XFree86 4.3, so
xfree86 -configure isn't going to work with versions older than
that.
Mark.
On Mon, 1 Dec 2003, Faissal ABDALLAH wrote:
Hi there,
after installing FreeBSD 4.7 on a P4 machine i tried to configure my
On Tue, Jun 24, 2003 at 01:22:26PM +0100, Andy Myers wrote:
X server wont start says:
could not init font path element unix/:7100, removing from list!
fatal server error:
could not open default font 'fixed'
On Tuesday, June 24, 2003 8:24 am, Daniel Godas Lopez wrote:
im am almost a
X server wont start says:
could not init font path element unix/:7100,
removing from list!
fatal server error:
could not open default font 'fixed'
there is more but this is exacly what happended
before to me and i had to reinstall, i really dont want to have to do that
again! why is it
:[EMAIL PROTECTED]
Sent: Tuesday, June 24, 2003 8:22 AM
To: xfree86
Subject: [XFree86] XSERVER CRASH - newbie needs help!
___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86
im am almost a newbie too but it seems you deleted one of the fonts, if
its that the only thing you have to do is find it (search for it on
google) and put it in the directory it was before, if it isnt that i
have no idea what happened :s
On Tue, Jun 24, 2003 at 01:22:26PM +0100, Andy Myers
thanks that worked:)
cool andy
- Original Message -
From: Cynthia Grossen [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Tuesday, June 24, 2003 2:17 PM
Subject: RE: [XFree86] XSERVER CRASH - newbie needs help!
Your font server has failed.
Here is a link to Red Hat documentation
hi
need help to recover my xserver
__
Do you Yahoo!?
Yahoo! Mail Plus - Powerful. Affordable. Sign up now.
http://mailplus.yahoo.com
XFree86.0.log
Description: XFree86.0.log
Can somebody take a look at this Xfree log file. My Xserver will not start.
cheers, conor
XFree86 Version 4.2.0 (Red Hat Linux release: 4.2.0-8) / X Window System
(protocol Version 11, revision 0, vendor release 6600)
Release Date: 23 January 2002
If the server is older than 6-12 months,
After an up2date update in RedHat linux 7.3 I have been unable to either
boot to level 5 or to use startx. I'm including the log file below. Can
you help me?
Thanks,
Wade Shepherd
Furman University
864-294-2276
[EMAIL PROTECTED]
XFree86 Version 4.2.0 (Red Hat Linux release: 4.2.0-8) / X
26 matches
Mail list logo