Hi, Iam using Xfree4.7.0 crosscompiled on a 7448 powerpc board with Marvell system controller Marvel *PCI 0* is connected to PMC site in which* PMC silicon motion vga card *is used Marvel *PCI 1* has *TSI 148* chip. The devices are not detected on running scanpci ... Help me to solve the issue
----------------------------------results---------------------------------------------------------------------------------------------------------- *on running ./scanpci *it displays only pci bus 0x0000 cardnum 0x01 function 0x00: vendor 0x10e3 device 0x0148 Tundra Semiconductor Corp. Device unknown *on running ./XFree86 -configure* (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:01:0: chip 10e3,0148 card 10e3,0000 rev 01 class 06,80,00 hdr 00 (II) PCI: End of PCI scan (II) Host-to-PCI bridge: (II) Bus 0: bridge is at (0:0:0), (-1,0,0), BCTRL: 0x0008 (VGA_EN is set) (II) Bus 0 I/O range: [0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] (II) Bus 0 non-prefetchable memory range: (II) Bus 0 non-prefetchable memory range: (II) Bus 0 prefetchable memory range: [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] List of video drivers: sm731 (II) Addressable bus resource ranges are [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] [1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] (II) OS-reported resource ranges: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x00000000 - 0x00000000 (0x1) MX[B] [2] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [3] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] (II) OS-reported resource ranges after removing overlaps with PCI: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x00000000 - 0x00000000 (0x1) MX[B] [2] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [3] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] (II) All system resource ranges: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x00000000 - 0x00000000 (0x1) MX[B] [2] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [3] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] *No devices to configure. Configuration failed.*