CVS Update: xc (branch: trunk)
CVSROOT:/home/x-cvs Module name:xc Changes by: [EMAIL PROTECTED] 03/08/18 13:36:00 Log message: build fix Modified files: xc/programs/xdm/: genauth.c Revision ChangesPath 3.17 +2 -2 xc/programs/xdm/genauth.c ___ Cvs-commit mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/cvs-commit
CVS Update: xc (branch: trunk)
CVSROOT:/home/x-cvs Module name:xc Changes by: [EMAIL PROTECTED] 03/08/18 14:40:05 Log message: Fix a race condition in the nv driver that caused a scribble sometimes. Plus new device IDs. Modified files: xc/programs/Xserver/hw/xfree86/drivers/nv/: nv_driver.c nv_setup.c nv_xaa.c Revision ChangesPath 1.112 +17 -6 xc/programs/Xserver/hw/xfree86/drivers/nv/nv_driver.c 1.36 +6 -1 xc/programs/Xserver/hw/xfree86/drivers/nv/nv_setup.c 1.32 +3 -1 xc/programs/Xserver/hw/xfree86/drivers/nv/nv_xaa.c ___ Cvs-commit mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/cvs-commit
Re: Some patches to luit
From: David Dawes [EMAIL PROTECTED] Date: Sun, 17 Aug 2003 16:35:20 -0400 I'll commit the patch. Thanks. It solved the problem on my FreeBSD 4.8-RELEASE-p* environment. Thanks. Best regards, Tsuyoshi --- ITO Tsuyoshi [EMAIL PROTECTED] --- --- Dept. of Computer Science, University of Tokyo. --- ___ Devel mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/devel
SiliconMotion Rotation
The siliconmotion driver has its own internal rotation option. It appears that this works by enabling ShadowFB, then using the hardware rotation capabilities to rotate-blt the changed areas. This worked fine with XF 4.2.0. However, with the same hardware, this is broken with XF 4.3.0. I diffed the smi_driver.c code between those versions and nothing seems to have been changed in the driver code that would have affected rotation. One thing that is not clear to me is how the X system in general is notified of the rotated resolution. In the driver, when rotation is enabled, the only apparent swapping of width and height that goes to anything outside of the driver is the initialization of the framebuffer layer's ScreenInit. Is this enough to communicate the rotated resolution? Running XF 4.2, if I start the server, then run xwininfo, click on the desktop, it reports back a window size of 600x800, which is what I would expect. If I then switch to XF 4.3, start the server, run xwininfo, click on the desktop, it reports a window size of 800x600. So, did something change about the higher level stuff that now requires something else to be done to change the desktop size? Thanks, -Chris ___ Devel mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/devel
Re: SiliconMotion Rotation
On Mon, 18 Aug 2003, Chris Edgington wrote: The siliconmotion driver has its own internal rotation option. It appears that this works by enabling ShadowFB, then using the hardware rotation capabilities to rotate-blt the changed areas. This worked fine with XF 4.2.0. However, with the same hardware, this is broken with XF 4.3.0. I diffed the smi_driver.c code between those versions and nothing seems to have been changed in the driver code that would have affected rotation. I have heard that the addition of the RandR (Rotate and Resize) extension into 4.3 broke some drivers which already did rotation. One thing that is not clear to me is how the X system in general is notified of the rotated resolution. In the driver, when rotation is enabled, the only apparent swapping of width and height that goes to anything outside of the driver is the initialization of the framebuffer layer's ScreenInit. Is this enough to communicate the rotated resolution? If I heard correctly, one of the features of RandR is that it allows this sort of notification. Unfortunately this area suffered in the political fight which happened around the time of the 4.3 release. -- Dr. Andrew C. Aitchison Computer Officer, DPMMS, Cambridge [EMAIL PROTECTED] http://www.dpmms.cam.ac.uk/~werdna ___ Devel mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/devel
1NKJET SUPPLIES, Great Pricing n
67 Percent off all printing supplies Please come see the stores, feel what others have already, quality ink cartridges at an amazining price. I offer many printer models including, Lexmark, Canon Epson, and HP http://spec1al1nksatspec1alpr1c1ng.com/neb.html If you wish to stop further sending of all our mails, http://theplacefor1nk.com/s20.html sharhw
[Fonts] DEVON
j2f7 Hi I have been receiving emails saying that I'm contributing to the moral decay of society by selling the Banned CD. That may be, but I feel strongly that you have a right to benefit from this hard-to-find information. So I am giving you one last chance to order the Banned CD! With this powerful CD, you will be able to investigate your friends, enemies and lovers in just minutes using the Internet. You can track down old flames from college, or you can dig up some dirt on your boss to make sure you get that next promotion! Or maybe you want a fake diploma to hang on your bedroom wall. You'll find addresses for companies that make these diplomas on the Bannedd CD. Need to disappear fast and never look back? No problem! Using the Banned CD, you will learn how to build a completely new identity. Obviously, the Powers That Be don't want you to have the Banned CD. They have threatened me with lawsuits, fines, and even imprisonment unless I stop selling it immediately. But I feel that YOU have a Constitutional right to access this type of information, and I can't be intimidated. Uncle Sam and your creditorss are horrified that I am still selling this product! There must be a price on my head! Why are they so upset? Because this CD gives you freedom. And you can't buy freedom at your local Walmart. You will have the freedom to avoid creditorss, judgments, lawsuits, IRS tax collectors, criminal indictments, your greedy ex-wife or ex-husband, and MUCH more! Please go the URL for the Detail! http://www.meds247.biz/CD/ n o m a i l to [EMAIL PROTECTED] s6N0Av32gUjv7D2Hc3B7f2Iw8 MJ1Q04xTy ___ Fonts mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/fonts
[Fonts] INKJET INKS, Best Ever Prices
66% off all printing supplies Please come see my store, feel what others already have, the best ink cartridges at an amazining price We offer many printing brands including, HP, Epson, Canon, and Lexmark. http://wholesale-products-4-less.com/neb.html If you want to prevent sending of mails, http://wholesale-products-4-less.com/s20.html lgetwo
[XFree86] x window don't run
I have operated Linux Server. Suddenly X Window don't run. attached Log file, help me. XFree86.0.log Description: Binary data
Re: [XFree86] x window don't run
Try starting your X font server. As root, run '/etc/init.d/xfs start' . Then see if it works. If so, set xfs to start at boot. http://www.google.com/search?q='cannot find default font fixed' Craig Ringer ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] X Server's crash
Hi, friends! I have some problem with X Server's start after building and installing XFree86 4.3.0 from latest source via CVSUp on FreeBSD 4.8-STABLE. Support of IPv6 is disabled on my system. What should I do to resolve this problem? Thanks! --- cut the log file /var/log/XFree86.0.log. _XSERVTransSocketOpenCOTSServer: Unable to open socket for inet6 _XSERVTransOpen: transport open failed for inet6/ozz.nensi.net:0 _XSERVTransMakeAllCOTSServerListeners: failed to open listener for inet6 Fatal server error: Failed to establish all listening sockets When reporting a problem related to a server crash, please send the full server output, not just the last messages. This can be found in the log file /var/log/XFree86.0.log. --- --- My Bests! Valery V. Lunyov, UNIX SysAdmin ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] Display Driver
Dear sir, I'm an Indian, a Computer Science student, interested in RedHat Linux since a year before. I've the hardware as: motherboard-Intel845GLLY mode4l, VBideo memory=8 MB(max), has a PS/2 mouse. I have a probleb, that is , I can't get into the X-Serverit shows the message that proper driver is not installed for VGA Sound. I'm using RedHat Linux-7.2 version. Plese suggest me some tips so that i can rectify them. Thanking you. Yours truly, Prasanjit Bhattacharya. E-mail:[EMAIL PROTECTED], [EMAIL PROTECTED] ___ Meet your old school or college friends from 1 Million + database... Click here to reunite www.batchmates.com/rediff.asp ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] Japanese fonts
Anyone? Someone has to know how to do this. - Original Message - From: Rob Taft [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Friday, August 15, 2003 5:00 PM Subject: [XFree86] Japanese fonts Hi, I'm trying to get Japanese fonts working without the X Font Server. The seem to work fine with the font server, but I need to get it working without going through the font server. This is the section I am concerned with: Section Files RgbPath /usr/X11R6/lib/X11/rgb # Multiple FontPath entries are allowed (they are concatenated together) # By default, Mandrake 6.0 and later now use a font server independent of # the X server to render fonts. # xfs FontPath unix/:-1 FontPath /usr/X11R6/lib/X11/fonts/misc:unscaled FontPath /usr/X11R6/lib/X11/fonts/75dpi:unscaled FontPath /usr/X11R6/lib/X11/fonts/misc:unscaled FontPath /usr/X11R6/lib/X11/fonts/Type1 FontPath /usr/X11R6/lib/X11/fonts/TTF FontPath /usr/X11R6/lib/X11/fonts/Speedo FontPath /usr/X11R6/lib/X11/fonts/mdk:unscaled FontPath /usr/share/fonts/default/Type1 EndSection This was done previously to get the fonts working without the font server. They seem to include everything in the fonts directory, and I know Japanese fonts are installed somewhere because I had them working with the font server. I mean not working as in getting blocks or getting UTF-8 garble. Any suggestions? ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86 ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] Mouse warp feature/bug.
When I use xinerama where one screen is smaller(in pixels), moving the mouse horizontally will cause it to warp vertically when moved off the screen. When the same is done vertically, however, the mouse stops and there is no warping. I'd like the vertically behavior to be the default when moving off the screen and for there to be no warping. __ Do you Yahoo!? Yahoo! SiteBuilder - Free, easy-to-use web site design software http://sitebuilder.yahoo.com ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] Japanese fonts
On Mon, 18 Aug 2003, Rob Taft wrote: Anyone? Someone has to know how to do this. 1. Check the dir list in XF86Config is equal to the /etc/X11/fs/config 2. Are you loading freetype and type1 modules in XF86Config ? HTH :) -- Bharathi S, IndLinuX Team, (__) DON Lab,TeNeT Group, oo ) IIT-Madras, Chennai-INDIA. (_/\ Known is DROP, Unknown is OCEAN. ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] Where to set modelines?
In data Sun, 17 Aug 2003 16:51:21 -0600 Brian Richardson [EMAIL PROTECTED] scriveva: This is most easily accomplished by creating a virtual desktop using both monitors, and keeping windows on the left screen until the right screen is working. Now... some more questions.. (I'm a bit confused, XFree and its config files are pretty scary and new to me!!!)... What if I don't create a [Section Modes] and I just add the ModeLine I need to use directly to the [Section Monitor]? And what does it mean what you wrote above? I mean: using two screens?!? Would it be like having 2 different set-ups and I could select the one I need in relation to _which_ monitor I actually connected to the PC? Is there a way to switch between them as it's possible to switch between different sizes (like 800x600, 1024x768, etc.) without having to restart X or reboot? Thank you... BTW: as I don't know the hoizontal and vertical frequency ranges, what should I put in HorizSync and VertRefresh for my Monstrum? -- Bonny - Registered Linux User #251752 --- VB LUG Moderator --- Computers run on faith, not electrons. pgp0.pgp Description: PGP signature
[XFree86] compile failure on 2.6.0-test3 system.
I am getting the below error when I try to compile xfree86 4.3.99.10 on a system with the 2.6.0-test3 kernel using gcc 3.3.1. Any idea how to fix this? gcc -m32 -c -march=athlon-mp -mmmx -mfpmath=sse -msse -m3dnow -O3 -march=athlon-mp -mmmx -mfpmath=sse -msse -m3dnow -O3 -fno-merge-constants -I../../../../../../programs/Xserver/hw/xfree86/common -I../../../../../../programs/Xserver/hw/xfree86/os-support -I. -I../../../../../../programs/Xserver/include -I../../../../../../exports/include/X11 -I../../../../../../include/extensions -I../../../../../../programs/Xserver/hw/xfree86/os-support/shared -I../../../../../.. -I../../../../../../exports/include -Dlinux -D__i386__ -D_POSIX_C_SOURCE=199309L -D_POSIX_SOURCE -D_XOPEN_SOURCE -D_BSD_SOURCE -D_SVID_SOURCE -D_GNU_SOURCE -DSHAPE -DXINPUT -DXKB -DLBX -DXAPPGROUP -DXCSECURITY -DTOGCUP -DXF86BIGFONT -DDPMSExtension-DPIXPRIV -DPANORAMIX -DRENDER -DRANDR -DGCCUSESGAS -DAVOID_GLYPHBLT -DPIXPRIV -DSINGLEDEPTH -DXFreeXDGA -DXvExtension -DXFree86LOADER -DXFree86Server -DXF86VIDMODE -DXvMCExtension -DSMART_SCHEDULE -DBUILDDEBUG -DXResExtension -DX_BYTE_ORDER=X_LITTLE_ENDIAN -DNDEBUG -DFUNCPROTO=15 -DNARROWPROTO -DHAS_MTRR_SUPPORT -DUSESTDRES -DHAVE_SYSV_IPC lnx_io.c lnx_io.c: In function `KDKBDREP_ioctl_ok': lnx_io.c:90: error: structure has no member named `rate' lnx_io.c:98: error: structure has no member named `rate' lnx_io.c:100: error: structure has no member named `rate' lnx_io.c:101: error: structure has no member named `rate' lnx_io.c:102: error: structure has no member named `rate' make[7]: *** [lnx_io.o] Error 1 make[7]: Leaving directory `/usr/src/xc.bld/programs/Xserver/hw/xfree86/os-support/linux' make[6]: *** [linux] Error 2 make[6]: Leaving directory `/usr/src/xc.bld/programs/Xserver/hw/xfree86/os-support' ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] ATI R200 Radeon 8500
Hi, I have serious problems with my video card!!! Where I can see the: ChipID MemBase IoBase ?? /var/log/XFree86.0.log: XFree86 Version 4.3.0 Release Date: 27 February 2003 X Protocol Version 11, Revision 0, Release 6.6 Build Operating System: Linux 2.4.20 i686 [ELF] Build Date: 04 May 2003 Before reporting problems, check http://www.XFree86.Org/ to make sure that you have the latest version. Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: /var/log/XFree86.0.log, Time: Mon Aug 18 10:58:10 2003 (==) Using config file: /etc/X11/XF86Config (==) ServerLayout Simple Layout (**) |--Screen Screen 1 (0) (**) | |--Monitor My Monitor (**) | |--Device VESA Framebuffer (**) |--Input Device Mouse1 (**) |--Input Device Keyboard1 (**) Option XkbRules xfree86 (**) XKB: rules: xfree86 (**) Option XkbModel pc105 (**) XKB: model: pc105 (**) Option XkbLayout us_intl (**) XKB: layout: us_intl (==) Keyboard: CustomKeycode disabled (**) FontPath set to /usr/X11R6/lib/X11/fonts/local/,/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/CID/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/,/usr/X11R6/lib/X11/fonts/cyrillic/ (**) RgbPath set to /usr/X11R6/lib/X11/rgb (==) ModulePath set to /usr/X11R6/lib/modules (--) using VT number 7 (II) Open APM successful (II) Module ABI versions: XFree86 ANSI C Emulation: 0.2 XFree86 Video Driver: 0.6 XFree86 XInput driver : 0.4 XFree86 Server Extension : 0.2 XFree86 Font Renderer : 0.4 (II) Loader running on linux (II) LoadModule: bitmap (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor=The XFree86 Project compiled for 4.3.0, module version = 1.0.0 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.4 (II) Loading font Bitmap (II) LoadModule: pcidata (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor=The XFree86 Project compiled for 4.3.0, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.6 (II) PCI: Probing config type using method 1 (II) PCI: Config type is 1 (II) PCI: stages = 0x03, oldVal1 = 0x802c, mode1Res1 = 0x8000 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 1002,cab2 card , rev 02 class 06,00,00 hdr 00 (II) PCI: 00:01:0: chip 1002,7010 card , rev 00 class 06,04,00 hdr 01 (II) PCI: 00:06:0: chip 10b9,5451 card 0e11,0056 rev 02 class 04,01,00 hdr 00 (II) PCI: 00:07:0: chip 10b9,1533 card 10b9,1533 rev 00 class 06,01,00 hdr 00 (II) PCI: 00:0a:0: chip 104c,ac41 card 8c00, rev 02 class 06,07,00 hdr 82 (II) PCI: 00:0a:1: chip 104c,8017 card 0e11,0056 rev 02 class 0c,00,10 hdr 80 (II) PCI: 00:0b:0: chip 10ec,8139 card 0e11,0056 rev 20 class 02,00,00 hdr 00 (II) PCI: 00:0c:0: chip 14f1,2f00 card 0e11,8d88 rev 01 class 07,80,00 hdr 00 (II) PCI: 00:10:0: chip 10b9,5229 card 10b9,5229 rev c4 class 01,01,fa hdr 00 (II) PCI: 00:11:0: chip 10b9,7101 card 10b9,7101 rev 00 class 06,80,00 hdr 00 (II) PCI: 00:13:0: chip 1033,0035 card 0e11,0056 rev 41 class 0c,03,10 hdr 80 (II) PCI: 00:13:1: chip 1033,0035 card 0e11,0056 rev 41 class 0c,03,10 hdr 00 (II) PCI: 00:13:2: chip 1033,00e0 card 0e11,0056 rev 02 class 0c,03,20 hdr 00 (II) PCI: 01:05:0: chip 1002,4337 card 0e11,0056 rev 00 class 03,00,00 hdr 00 (II) PCI: End of PCI scan (II) Host-to-PCI bridge: (II) Bus 0: bridge is at (0:0:0), (0,0,2), BCTRL: 0x0008 (VGA_EN is set) (II) Bus 0 I/O range: [0] -1 0 0x - 0x (0x1) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -1 0 0x - 0x (0x0) MX[B] (II) Bus 0 prefetchable memory range: [0] -1 0 0x - 0x (0x0) MX[B] (II) PCI-to-PCI bridge: (II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000c (VGA_EN is set) (II) Bus 1 I/O range: [0] -1 0 0xa000 - 0xa0ff (0x100) IX[B] [1] -1 0 0xa400 - 0xa4ff (0x100) IX[B] [2] -1 0 0xa800 - 0xa8ff (0x100) IX[B] [3] -1 0 0xac00 - 0xacff (0x100) IX[B] (II) Bus 1 non-prefetchable memory range: [0] -1 0 0xf030 - 0xf03f (0x10) MX[B] (II) Bus 1 prefetchable memory range: [0] -1 0 0xf800 - 0xfbff (0x400) MX[B] (II) PCI-to-ISA bridge: (II) Bus -1: bridge is at (0:7:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set) (II) PCI-to-CardBus bridge: (II) Bus 2: bridge is at (0:10:0), (0,2,2), BCTRL: 0x05c0 (VGA_EN is cleared) (II) Bus 2 I/O range: [0] -1 0 0x8c00 - 0x8cff (0x100) IX[B] [1] -1 0 0x8800
Re: [XFree86] compile failure on 2.6.0-test3 system.
On Mon, 18 Aug 2003, Robin Cook wrote: I am getting the below error when I try to compile xfree86 4.3.99.10 on a system with the 2.6.0-test3 kernel using gcc 3.3.1. Any idea how to fix this? gcc -m32 -c -march=athlon-mp -mmmx -mfpmath=sse -msse -m3dnow -O3 -march=athlon-mp -mmmx -mfpmath=sse -msse -m3dnow -O3 -fno-merge-constants -I../../../../../../programs/Xserver/hw/xfree86/common -I../../../../../../programs/Xserver/hw/xfree86/os-support -I. -I../../../../../../programs/Xserver/include -I../../../../../../exports/include/X11 -I../../../../../../include/extensions -I../../../../../../programs/Xserver/hw/xfree86/os-support/shared -I../../../../../.. -I../../../../../../exports/include -Dlinux -D__i386__ -D_POSIX_C_SOURCE=199309L -D_POSIX_SOURCE -D_XOPEN_SOURCE -D_BSD_SOURCE -D_SVID_SOURCE -D_GNU_SOURCE -DSHAPE -DXINPUT -DXKB -DLBX -DXAPPGROUP -DXCSECURITY -DTOGCUP -DXF86BIGFONT -DDPMSExtension-DPIXPRIV -DPANORAMIX -DRENDER -DRANDR -DGCCUSESGAS -DAVOID_GLYPHBLT -DPIXPRIV -DSINGLEDEPTH -DXFreeXDGA -DXvExtension -DXFree86LOADER -DXFree86Server -DXF86VIDMODE -DXvMCExtension -DSMART_SCHEDULE -DBUILDDEBUG -DXResExtension -DX_BYTE_ORDER=X_LITTLE_ENDIAN -DNDEBUG -DFUNCPROTO=15 -DNARROWPROTO -DHAS_MTRR_SUPPORT -DUSESTDRES -DHAVE_SYSV_IPC lnx_io.c lnx_io.c: In function `KDKBDREP_ioctl_ok': lnx_io.c:90: error: structure has no member named `rate' lnx_io.c:98: error: structure has no member named `rate' lnx_io.c:100: error: structure has no member named `rate' lnx_io.c:101: error: structure has no member named `rate' lnx_io.c:102: error: structure has no member named `rate' make[7]: *** [lnx_io.o] Error 1 make[7]: Leaving directory `/usr/src/xc.bld/programs/Xserver/hw/xfree86/os-support/linux' make[6]: *** [linux] Error 2 make[6]: Leaving directory `/usr/src/xc.bld/programs/Xserver/hw/xfree86/os-support' Humm. This looks like an oversight. Try changing lnx_io.c to #include linux/version.h. Marc. +--+---+ | Marc Aurele La France | work: 1-780-492-9310 | | Computing and Network Services | fax:1-780-492-1729 | | 352 General Services Building | email: [EMAIL PROTECTED] | | University of Alberta +---+ | Edmonton, Alberta | | | T6G 2H1 | Standard disclaimers apply| | CANADA | | +--+---+ XFree86 Core Team member. ATI driver and X server internals. ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
RE: [XFree86] (no subject) S3 prosavage DDR driver
Hi ( i?m spanish native so excuse my english ) Well i have the same problem with Suse 8.2 and the reason is in the driver for the video S3 prosavage DDR, I now two solutions: 1. Fast: Download the driver from: http://www.probo.com/timr/savage40.html and a) make a backup copy of the existing savage driver in /usr/X11R6/lib/modules/drivers/ b) unpack the archive and copy the driver (savage_drv.o) to /usr/X11R6/lib/modules/drivers/ c) run sax2 to configure XFree ( you must download the driver for your Xfree version ) d) sometime you must open /etc/X11/XF86Config find the Device section and add the following line Option UseBIOS no With this solution you don?t have 3D acceleration 2. Best: I now for sure that there is better patch for Red hat 7.2, you can find it in the same web of the other driver ( http://www.probo.com/timr/savage40.html) it?s only work with xfree 4.2.0 but some people say it?s work perfect. With this solution you will have 3D ACELLERATION So that?s all i hope this could help you. atte. MMM -- Mensaje Original -- From: nanda gopal [EMAIL PROTECTED] To: [EMAIL PROTECTED] Reply-To: [EMAIL PROTECTED] Subject: [XFree86] (no subject) Date: Mon, 18 Aug 2003 16:33:36 +0100 (BST) sir, iam nanda gopal. my system configuration is P-IV,1.8Ghz processor,motherboard is VIA P4M266a Mercury Chipset,dispaly card is S3 graphics prosavage DDR,monitor is Samtron Syncmaster 56v 15 monitor,Memory is 128 DDR RAM. yesterday i have installed Red Hat Linux 7.2 in my system.i have allocated 5GB for LINUX.3.5GB for Linux root and 1.5GB for SWAP. during installation i have applied for GUI mode. After the successful installaton my system responds only to Text mode it doesn't enter into GUI mode. while iam typing Startx comand. i got the following error FATAL SERVER ERROR NO SCREEN FOUND XIO: fatal IO error 104 (connection reset by peer) on X server ;0.0 after 0 requests ( 0 known processed) with 0 events remaining. what is the problem? i need ur help.plz guide me.i have GRUB for multi booting i.e i have win xp and win 98 in my harddisk. iam the new user to red hat operating system. iam awaiting a reply from ur side as soon as possible. regards nanda gopal. Yahoo! India Promos: Win TVs, Bikes, DVD players more! Go to http://in.promos.yahoo.com ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86 ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] Solaris 2.5.1 XInternAtom
Good day. I've a trouble with compiling a some programm for Qt 3.x under Sun Solaris 2.5.1: after compiling linker wrote that XInternAtom isn't resolved reference... When I copied libX11.so from Solaris 8 - linked created binary, but I can't run it, because this XInternAtom isn't present in another library, where ls looking for it. How can I resolve this trouble, w/o coping .so file to Solaris 2.5?.. ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] Solaris 2.5.1 XInternAtom
Vadim Bondarev wrote: I've a trouble with compiling a some programm for Qt 3.x under Sun Solaris 2.5.1: after compiling linker wrote that XInternAtom isn't resolved reference... When I copied libX11.so from Solaris 8 - linked created binary, but I can't run it, because this XInternAtom isn't present in another library, where ls looking for it. How can I resolve this trouble, w/o coping .so file to Solaris 2.5?.. Solaris 2.5.1 is a very old release - it only had X11R5, while almost everything these days assumes X11R6 or newer. If you must run under Solaris 2.5.1, your best bet is compiling a complete set of X11 libraries and installing them in /usr/X11R6 - then using those only for apps that require them and leaving the /usr/openwin libraries for the apps already present in Solaris. -- -Alan Coopersmith- [EMAIL PROTECTED] Sun Microsystems, Inc. - Sun Software Group Quality / User Experience (QUE) - Globalization Platform Globalization Engineering: X11 Development ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
RE: [XFree86] ATI R200 Radeon 8500
all PCI values below are taken from http://yourvote.com/pci database. /var/log/XFree86.0.log: XFree86 Version 4.3.0 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 1002,cab2 card , rev 02 class 06,00,00 hdr 00 ATI IGP 340M host bridge (II) PCI: 00:01:0: chip 1002,7010 card , rev 00 class 06,04,00 hdr 01 ATI RS200 PCI to AGP bridge (II) PCI: 01:05:0: chip 1002,4337 card 0e11,0056 rev 00 class 03,00,00 hdr 00 ATI RS200M Mobility M6 (U2) laptop typcial chipset (II) Primary Device is: PCI 01:05:0 (**) ChipID override: 0x514C (**) Chipset ATI Radeon 8500 QL (AGP) found Boy, you are using overrides - telling the driver that it should see something it knows which is not present at all in your system. You will better take one of the latest snapshots from XF86 or the DRI people and retry than trying things that will surely crash. (WW) RADEON(0): Failed to set up write-combining range (0x800,0x200) I think your CPU is our of MTRR resources our your Linux kernel does have some coding flaw for MTRR. (EE) RADEON(0): Idle timed out, resetting engine... The engine got some bogus data, possibly from AGP range. Alternatively the programmed and/or checked bits do not at all match what the driver wants them to be. Use latest drivers. the RS200 was not supported in the last XF86 release since those chipset is newer or at least Linux coding for that was not there at this time. /etc/X11/XF86CONFIG: its XF86Config or rather XF86Config-4. Section Device Identifier VESA Framebuffer Driver radeon ChipID0x514c VideoRam32768 #Option AGPMode 4 MemBase 0x800 # physical address of the linear framebuffer #IOBase 0xf030 # physical address of the MMIO registers BusID PCI:1:05:0 EndSection Forget about all those overrides, those were merely for ISA boards which did not expose full autoconfiguration and autodetection. PCI/AGP boards do nicely autodetect if they are supported. The sole purpose of the ChipID override for PCI boards is the fact that some newer chipset IDs are mostly compatible with former designs. You already failed that with the stock drivers. Use beta drivers. -Alex. ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] problem...
Sir, My system configuration is P-III 500Mhz,128MB RAM, 810DST Intel motherboard. And after I installed Red hat linux 8.0 (psych), it seems okay.Later on, I upgraded it to Red hat linux 9.0(shrike).To a sudden, the XFRee86 gave problem...and x display did not come, showed only text based linux, after i typed my user id with password, and i typed startx to open GUI, and the monitor blinked thrice, showed problem with bitmap modules. And I am also attaching the log files..Please reply with the solutions immediately. I am an expert on perl and PHP on unix at home and doing my engineering final yr. reply fast... thanking you Hare Krshna India ___ Meet your old school or college friends from 1 Million + database... Click here to reunite www.batchmates.com/rediff.asp ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re[2]: [XFree86] Solaris 2.5.1 XInternAtom
Solaris 2.5.1 is a very old release - it only had X11R5, while almost everything these days assumes X11R6 or newer. If you must run under Solaris 2.5.1, your best bet is compiling a complete set of X11 libraries and installing them in /usr/X11R6 - then using those only for apps that require them and leaving the /usr/openwin libraries for the apps already present in Solaris. -- Alan, thanks for your answer, but your solution disagree for my situation: I must use Solaris 2.5.1 and pre-installed XWin and nothing more. I've downloaded Qt 1.x and see that it's use XInternAtom too. So, may be libX11.so incomplete?.. Vadim. ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] Help
I had trouble to install my video Could you help me? I am sending the log file Thank you. Breno Coelho XFree86.0.log Description: Binary data
RE: [XFree86] EPOX 8RDA+ ( nForce2 chipset)
would you mind, if am redirecting you to the Rage3D forums. there you will find several threads and step by step instructions to bring nForce to life. of course they do a bit more concentrate on ATI, but that location should solve your problem anyways. -Alex. -Original Message- From: Morel I. Aboga [ mailto:[EMAIL PROTECTED] mailto:[EMAIL PROTECTED] ] Sent: Monday, August 11, 2003 04:35 To: [EMAIL PROTECTED] Subject: [XFree86] EPOX 8RDA+ ( nForce2 chipset) Sir, I'm using EPOX 8RDA+ mainboard and Nvidia FX 5200 ultra videocard. I've installed the RedHat Linux 9.0, and upgrade/update the NVIDIA chipset and videocard kernel, edit the XF86Config using emacs. but still no video output. Please send me an information,about installing / upgrading the kernel, step by step what to do in Upgrading my kernel.Thank you Morel I. Aboga ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] Help
You should upgrade to XFree86 4.3. Your version (4.0.3) is a couple years old and predates your graphics hardware. Mark. On Mon, 18 Aug 2003, Breno Coelho wrote: I had trouble to install my video Could you help me? I am sending the log file Thank you. Breno Coelho ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] (no subject)
On Mon, 18 Aug 2003, Ken Copling wrote: hello i bought freebsd desktop edition and the x window didnt reconize my graphics card so now im wondering what would be a powerful graphics card to install on this system that x does reconize Why doesn't it recognize your graphics card? We need to see your /var/log/XFree86.0.log Chances are, if your X-Server is too old, you won't get a modern graphics card to work with it. ie, the drivers are the problem, not the card. Mark. ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
RE: [XFree86] Help
doing some research with http://yourvote.com/pci once again, XFree86 Version 4.0.3 / X Window System (protocol Version 11, revision 0, vendor release 6400) Release Date: 16 March 2001 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (See http://www.XFree86.Org/FAQ) totally outdated and unsupported!!! you should upgrade to a newer version of XFree86 - really. (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 10de,01a4 card , rev b2 class 06,00,00 hdr 80 (II) PCI: 00:00:1: chip 10de,01ac card 10de,0c11 rev b2 class 05,00,00 hdr 80 you are running an nForce 1 based system. you must ensure to have latest patches for your kernel applied if you want to run hardware accellerated OpenGL without crashing your system. (II) PCI: 02:00:0: chip 10de,01a0 card 10de,0c11 rev b1 class 03,00,00 hdr 00 you are having the GeForce2 integrated grafics chipset. i cant see anything else on PCI bus that has a grafics ID. you might be forced to get either latest DRI development beta drivers (for X4.3.0) or possibly try something from your grafics hardware vendor's download area. (EE) VGA(0): Given depth (16) is not supported by this driver. (II) UnloadModule: vga (EE) Screen(s) found, but none have a usable configuration. Fatal server error: no screens found i am not finally sure - possibly only 4bpp and lower is supported by vga drivers. at least i am sure VGA does not offer 16 bpp, but maybe only 8bpp for 320x200 resolution. you might have better success trying the VESA drivers. -Alex. -Original Message- From: Breno Coelho [mailto:[EMAIL PROTECTED] Sent: Monday, August 18, 2003 23:02 To: [EMAIL PROTECTED] Subject: [XFree86] Help I had trouble to install my video Could you help me? I am sending the log file Thank you. Breno Coelho ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] problems with xwindows
This is the eror i saw when i tried startx command can u help please [EMAIL PROTECTED] achun]$ startx Fatal server error: Server is already active for display 0 If this server is no longer running, remove /tmp/.X0-lock and start again. When reporting a problem related to a server crash, please send the full server output, not just the last messages. Please report problems to [EMAIL PROTECTED] ___ Meet your old school or college friends from 1 Million + database... Click here to reunite www.batchmates.com/rediff.asp ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] PLS help - no screen found
Title: Sprva I have some problem with starting xfree86 at home. Can you help me, please? log file included. Thanks Radoslav Kukula REPLY TO: [EMAIL PROTECTED] pozadie_email.jpg XFree86.0.log Description: Binary data
Re: [XFree86] (no subject)
On Mon, 18 Aug 2003, nanda gopal wrote: P4M266a Mercury Chipset,dispaly card is S3 graphics prosavage FATAL SERVER ERROR NO SCREEN FOUND I am NOT sure abt the support for the S3. So try to install in new release of X OR Try to reconfigure ur X using XConfigurator. Again if you get the same error, send xf86config and xfree.log files. what is the problem? i need ur help.plz guide me.i have GRUB for multi booting i.e i have win xp and win 98 in my harddisk. iam the Read the GRUB Manual page( /usr/share/doc/grub-xyz ) Check the sample files. HTH :) -- Bharathi S, IndLinuX Team, (__) DON Lab,TeNeT Group, oo ) IIT-Madras, Chennai-INDIA. (_/\ Known is DROP, Unknown is OCEAN. ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] fonr problem
Hi all, When i run gedit from Xterm . i get the following error. But still i can run gedit with no problem. Paras. -- bash-2.05a# gedit ** (gedit:852): WARNING **: Couldn't load font Sans Regular 10 falling back to Sans 10 ** (gedit:852): WARNING **: Couldn't load font Sans Regular 10 falling back to Sans 10 ** (gedit:852): WARNING **: Couldn't load font Monospace Regular 10 falling back to Sans 10 bash-2.05a# Paras pradhan Systems Dept. Bajranet PVT LTD Kathmandu Nepal. Paras pradhan Systems Dept. Bajranet PVT LTD Kathmandu Nepal. ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
