The mailbox ([EMAIL PROTECTED]) rejected your mail as a basic prevention to
unauthorized
mail (spam).
**
Detected w32.sobig worm virus
**
Disallowd Subject headers: My details, Your details, Your application,
The subject line of your message was Re: Wicked screensaver.
This did NOT contain the word Linux.
The counter has unfortunately been the recipient of many sorts
of messages, some of which were not intended as registrations.
Therefore, the subject line MUST include Linux to perform a
simple
tar: Unable to remove directory ./geometry/hp: Directory not empty
*** Error code 1
I'm assuming that's /etc/X11/xkb/geometry/hp it's complaining
about. Remove it manually and make install again. Perhaps
you are aliasing rm someplace so that it's not being forced.
Or I suppose it
This is a real bug. It should be:
if (cPtr-PanelType ChipsLCD)
ChipsNew-XR[0x51] |= 0x04;
else
ChipsNew-XR[0x51] = ~0x04;
Could you please test this for me?
Egbert.
OK, I was tested this for you.
Now, we have useal module for ct65548 and other chips.
But its
Hi folks,
got some worries with starting the X-Server and hope one of you would like
to help.
Attached you find XF86Config and Xfree86.0.log. I tried to run the Font
Server as well as giving explicite fonts path however both ends up with:
Fatal Server Error: Cannot find default font fixed
Hi folks,
got some worries with starting the X-Server and hope one of you would like
to help.
Attached you find XF86Config and Xfree86.0.log. I tried to run the Font
Server as well as giving explicite fonts path however both ends up with:
Fatal Server Error: Cannot find default font fixed
Is your LCD a TFT or a DSTN? What about the error messages in the
logs does it say
(--) CHIPS(0): TFT probed
or
(--) CHIPS(0): DS-STN probed
In any case although its been a while since I looked at the code, I
think you have identified a real bug. I'd suggest a better fix might
be the attached
hai good evening
I am doing my sys-admin course in REDHAT.
please find herewith i'm sending attach file
Fatal server error.
please send me different types of errors and
troubleshooting methods.
please do the needful.
Thanks
With regards
RAMESH SREENIVAS
See the attached file for details
Unknown command.
---
Ecartis v1.0.0 - job execution complete.
___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86
Thank you for contacting Metro Link. This is an auto-response message with
important instructions.
Due to an inordinate amount of spam sent to [EMAIL PROTECTED], we have
eliminated this address and created a new one. Please resend your message
to the following address, changing the words to
Hi all,
I have a NVidia Geforce 2 GO videocard on a laptop, so I want to use my
external monitor for presentations, but it doesn't work. I have tried installing
the latest driver from NVidia which gives some progress: from an image of a
testscreen (lots of colors on a text screen) I go to a
Jeroen,
I have a Dell Latitude C800 with the NVidia GeForce 440 Go. I had
similar problems and found that I had to set up a second screen in my
XFree86 config file and turn of the LCD using the Panel Off line.
HTH,
Chuck
[EMAIL PROTECTED] wrote:
Hi all,
I have a NVidia Geforce
Guys,
All your responses are coming to me. Please fix.
___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86
You might also want to play with the SetMClk option.
I do not know how about with SetMClk option.
Shall you teach me that ?
In my case, please read three files.
XFree86 Version 4.3.0 (Red Hat Linux release: 4.3.0-2)
Release Date: 27 February 2003
X Protocol Version 11, Revision 0, Release 6.6
Jeron,
I am currently working in WinBlows right now, I will send you the
config a little later when I can boot up a real OS. :-)
[EMAIL PROTECTED] wrote:
Could you please aid me by sending me your config file? I have fiddled a lot
with setting up a second screen, but I cant get it
On Fri, 22 Aug 2003, Lars Hecking wrote:
tar: Unable to remove directory ./geometry/hp: Directory not empty
*** Error code 1
I'm assuming that's /etc/X11/xkb/geometry/hp it's complaining
about. Remove it manually and make install again. Perhaps
you are aliasing rm someplace
Hi,
I am running freebsd-stable on my box and I often got the gdm crash and
the whole X would restart. (I didn't do some heavy job.) In the console,
I got gdm[63037]: gdm_slave_xioerror_handler: Fatal X error -
Restarting :0. Can somebody tell me why? Thank you!
/var/log/XFree86.0.log
XFree86
Thank you for applying with Avnet, Inc., and for the opportunity to review
your background and experience.
Your resume will remain active in our centralized database for six months
and should an appropriate position become available, we will contact you
directly.
To assist Avnet in its
I often use the alt-key to generate eight-bit characters directly
into text editors and such. I have recently discovered that this
ability comes and goes. It works in XFree86 4.1.0 and 4.2.1 but
not 4.2.0. In each case, all settings in my user-account were
identical. My questions are:
1)
How do I go about switching to xfree86-4.3.99.10 on my Debian Woody?
I've downloaded the cvs, compiled and installed, but have a problem
configuring everything as it still has the old XF86Config-4 and when I
run the xfree86config script I can't get it to run all that well as the
driver as lots
From your xfree 85 log I can see that your on 4.2.1.1, so you need to
uipgrade to xfree86 4.3.0 or above for Radeon 9000 support.
Bernt Hansen wrote:
I just purchased a new Toshiba Tecra S1 laptop with an ATI Radeon 9000
video card. XFree86 fails to load when I run 'xf86cfg'.
I get the
I was running out of room in my /usr/src and have therefore installed
both the new kernel source and xfree86 cvs source on another volume,
but do I need to set an environment varialble for xfree86's make file
to find the correct kernel source and headers?
I've made a symbolic link from
CVSROOT:/home/x-cvs
Module name:xc
Changes by: [EMAIL PROTECTED] 03/08/22 06:29:16
Log message:
384. Fix bugs in Xlib's EUC string converters that cause incorrect work of
_Xmblen. Fix _Xmblen usage in imCallbk.c when Xlib is built with
X_LOCALE (Etsushi
CVSROOT:/home/x-cvs
Module name:xc
Changes by: [EMAIL PROTECTED] 03/08/22 06:31:11
Log message:
382. Fixes and updates for XKB keyboard maps:
- Fix for Uzbek keyboard map (Bugzilla #595, Mashrab Kuvatov).
- Fix for the problem with Alt+Tab combinations in
CVSROOT:/home/x-cvs
Module name:xc
Changes by: [EMAIL PROTECTED] 03/08/22 06:32:35
Log message:
updates
Modified files:
xc/programs/Xserver/hw/xfree86/:
CHANGELOG
Revision ChangesPath
3.2815+11 -1
CVSROOT:/home/x-cvs
Module name:xc
Changes by: [EMAIL PROTECTED] 03/08/22 06:30:26
Log message:
383. Update xev program for print the result of XmbLookupString call
(Bugzilla #582, Noah Levitt, Ivan Pascal)
Modified files:
xc/programs/xev/:
xev.c
CVSROOT:/home/x-cvs
Module name:xc
Changes by: [EMAIL PROTECTED] 03/08/22 10:56:24
Log message:
Add missing i2c symbol.
Modified files:
xc/programs/Xserver/hw/xfree86/ddc/:
xf86DDC.c
Revision ChangesPath
1.26 +2 -1
CVSROOT:/home/x-cvs
Module name:xc
Changes by: [EMAIL PROTECTED] 03/08/22 12:27:33
Log message:
392. Fixed a crash when _XIMProtoOpenIM(), hich is called through XOpenIM()
API when protocol IM is being set up, fails (Bugzilla #618,
Hisashi MIYASHITA).
Dr Andrew C Aitchison writes:
Are you sure you actually want the problem solved anyway ?
We have a laptop with a 125dpi screen and a lecture room projector
with about 8dpi.
If I were to make it run a two screen desktop, and my slide viewer
honoured the true screen DPI, on one screen
Hi Alan,
My impression was that the purpose of the dummy driver was a skeletal
implementation of a device driver which people could use when writing
new drivers. That's what I used if for anyway :-)
The intention was to add the headless and input device-less support
from Xvfb
--Original Message Text---
From: Tao, Qian (Ý+ IES)
Date: Sun, 17 Aug 2003 15:04:31 +0800
the relationship between framebuffer and starting speeda newbie question
I want to make Xserver start more fast.
Why? What is the point? The typical X server starts once and runs for days,
Greetings!
I would like to report something which does not look right to me with Rel. 4.3.x: I
have a Matrox Mystique which performed flawlessly on 4.2.0. Both releases were
compiled from source locally. Kernel version is 2.4.19. With any of the 4.3.x -
releases (I tried 4.3.0, 4.3.0_1 and the
Mark McLoughlin writes:
Hi Alan,
My impression was that the purpose of the dummy driver was a skeletal
implementation of a device driver which people could use when writing
new drivers. That's what I used if for anyway :-)
Not really. It is a fully working driver. I wrote it to
David Dawes writes:
On Fri, Aug 22, 2003 at 02:42:55PM +0100, Mark McLoughlin wrote:
Hi Alan,
My impression was that the purpose of the dummy driver was a skeletal
implementation of a device driver which people could use when writing
new drivers. That's what I used if for anyway :-)
How do I unsubscribe from this list?
TERI 9
Do you Yahoo!?
Yahoo! SiteBuilder - Free, easy-to-use web site design software
hi, Batbileg.
Normally, Mongolian xkb was supported in XFree-4.3 already.
(2002-12-01).
You can use some unicode font with this xkb.
It would be useful for your problem. http://www.openmn.org
There is some documentation in your native language. If your problem is
not solved you can contact
On Friday 22 August 2003 10:25, Ivan Pascal wrote:
Hi,
Frank Murphy wrote:
So what's the difference between alt+c on Mac OS and Multi_key+, on X11?
Is it just the display of the greyed-out character? I had thought that a
dead key was a real key on the keyboard (that had the accent
So after some deliberation, I have the first patch to the pc/ directory. It's
just the README.naming to define what the files in this directory should
contain. This is probably just an intermediate solution, but will enable
people to easily separate the language keymaps from the country
Hi,
I checked lcEuc.c and found euc_mbstowcs() is doing wrong about
*from_left value. Referencing with stdc_mbstowcs() in lcgenConv.c, I
modified euc_mbstowcs() and also euc_wcstombs() in lcEuc.c. With this
modification, _Xmblen began to work fine .
Good work!
I was going to tell you
Hello.
I'm a maintainer of im-sdk distributed by OpenI18N.org, and I received a
report that Mozilla with macromedia flashplayer crashes if it using XIM
facility.
According to my investigation, it is a critical bug of ximcp.so.
Potentially, this problem might occur on any XIM application when
40 matches
Mail list logo
