On Sunday 14 March 2004 01:46, Patrick Hampton wrote:
I have been having problems setting up my X configuration file. I keep
getting a No Screens Found error. The log file shows that it is using a
default set of horizontal and vertical rates. I have in my configuration a
different set of
Dear Sir/Madam,
I have installed Red Hat Linux 7.1 on my Home system. When i type the command "startx" at the command prompt in order to open up KDE or GNOME windows i get some errors.
I have attached the file xFree86.0.log which includes those errors thrown by the system.
Please let me know
On Sunday 14 March 2004 12:46, ~VJ~Savio~Pereira~ wrote:
Please let me know how to trouble shoot this problem.
Here are the lines I found to be most interesting:
(--) PCI:*(1:0:0) S3 unknown chipset (0x8d04) rev 0, Mem @ 0xec00/19,
0xe000/27
(II) VGA: Generic VGA driver (version 4.0)
Xfree86 Please wait E-mail is loading.
Xfree86 Stdop being shdy about yodur pednis sixze, Disdcreet
paczkaging, Ortder todxay at your doodrstep tomorrow!
Cldick hezre nogw
eagle relaxation leaden
madras meson mitosis quadrant congratulatory salaam transferred flatulent
I jumped into the upgrade with both feet without taking the
time to really understand what I was doing and now cant seem to get to
my Gnome desktop. I am new to Linux and havent quite got the
startup process figured out. My problem is I now boot into a light green
low resolution screen
I am struggling to use any resolution other than 800x600, which is not
good for my 20 monitor.
When I CTRL-ALT +/-, the screen appears Smeared diagonaly.
I am using ATI RADEON 8500, and have installed the rpm from ATI.com
my XFree86Config section is:
Identifier My Monitor
HorizSync 31.5 -
On Sunday 14 March 2004 16:14, Phil wrote:
I am struggling to use any resolution other than 800x600, which is not
good for my 20 monitor.
Identifier My Monitor
HorizSync 31.5 - 50.0
VertRefresh 40-90
Hmm, with a maximum of 50 MHz for the Horizontal Sync, you're likely to get a
Vertical
On Sunday 14 March 2004 16:36, Phil wrote:
I have no idea of the capabilities of my monitor.
Do you have a brand and type of the monitor? Google is your best friend in
these things. :)
Btw, is vesa really the driver you want to be using for your Radeon 8500? You
wrote you installed the driver
My monitor is a 10yr old Hitachi 20 ... no, I am not crawling round the
back of it to look for model numbers (not just yet ...).
I dno;t know why XFree86Config says it is using VESA drivers ... i
downloaded and installed the ATI rpm (rpm2tgz, installpkg), and thougth
that would do it.
Being
Newbie myself, I'm not sure I can help. But I can share! I also went to 4.4.0
quite fast because of res./color problems with my Intel chipset (laptop). Tne
install went well but I kept on getting error messages of various natures
(fontpath, etc...). So, my experience is
1- When you get to that
On Sunday 14 March 2004 17:04, Phil wrote:
My monitor is a 10yr old Hitachi 20 ... no, I am not crawling round the
back of it to look for model numbers (not just yet ...).
Hmmm, with a 10 year old monitor I don't know if I'd be willing to chance the
trial and error method of increasing your
Well yes I have a TV attached also. But I was just trying to get the Monitor
working first before I tried the TV.
I thought I told it to use the View Port for the monitor.
- Original Message -
From: Pieter Hulshoff [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Cc: Patrick Hampton [EMAIL
to: [EMAIL PROTECTED]
New Kernel makes X fail
Try starting with a new kernel(linux-2.6.3) I get this error.
_XSERVTransSocketOpen: socket() failed for local
_XSERVTransSocketOpenCOTSServer: Unable to open socket for local
_XSERVTransOpen: transport open failed for local/debian:0
Phil wrote:
My monitor is a 10yr old Hitachi 20 ... no, I am not crawling round the
back of it to look for model numbers (not just yet ...).
I dno;t know why XFree86Config says it is using VESA drivers ... i
downloaded and installed the ATI rpm (rpm2tgz, installpkg), and thougth
that would do
I'm no expert on modern S3 cards, but I think you want to be using
an XFree86 version that's a few years newer than the one you are trying
to use, and I think you want to be using the savage driver rather
than the vga driver.
Mark.
On Sun, 14 Mar 2004, [iso-8859-1]
I think I have at least figured out that I am launching into the fvwm2
window manager.
I have attempted to add the gnome-session line to the xinitrc file but
it still starts the fvwm interface. I must be missing something.
Richard
I jumped into the upgrade with both feet without taking the
On Sunday 14 March 2004 18:22, Patrick Hampton wrote:
Well yes I have a TV attached also. But I was just trying to get the
Monitor working first before I tried the TV.
I thought I told it to use the View Port for the monitor.
I'm on thin ice here, as I have no experience with your setup, but
Hi,
I'm sending files requested to give proper help. Like I said it seems like
Xv is not working (I get lower cpu if I set -vo x11 in mplayer). I suspect
that software scaling is going on, but don't know what to do to correct this
( I get CPU for X 40-50% and for mplayer or mythtv frontend about
On Fri, 5 Mar 2004, Wes Jennings wrote:
I have a persistent XF86 server crash. Here are some details and
my attached /var/log file. Any help with what I am dealing with
greatly appreciated.
Thanks in advance, Wes Jennings email: wes @harbornet.com
1. Generic 200MHz Pentium computer with
Now I tried to install Mandrake 10 and it
said(EE) Unable To Determine The Screen Layout
Try To Change some Parameters
So I tried using xf86config and it still gave me
the same message. Help Me.
Thanks,
Jared
Sorry If The Log file is a bit jumbled, I'm sending
it from windows because
V-ICODIN XAN3X FULL MEDS
Shop Canda Rx Click Here
Interest, Hearing, Town, Wax, Living, Nose, Hospital, Thought, Grey/gray, Middle, Bag, Cow, Thick, Unit, Fixed, Able, Present, Whip, Hanging, Doubt,
I'm certainly no expert, but running xf86config without saving to XF86Config-4
seemed to induce that kind of problems with me. At some point I had 4
different config files in X11... I wonder how init can determine which is the
good one... Not sure that helps!
On Sunday 14 March 2004 04:14
Robert Rozman wrote:
Hi,
I'm sending files requested to give proper help. Like I said it seems like
Xv is not working (I get lower cpu if I set -vo x11 in mplayer). I suspect
that software scaling is going on, but don't know what to do to correct this
( I get CPU for X 40-50% and for mplayer or
Specifically it said:
(==) ServerLayout layout1
(**) |--Screen screen1 (0)
(**) | |--Monitor monitor1
(**) | |--Device device1
(EE) No core pointer device specified
(EE) Unable to determine the screen layout
(EE) Error from xf86HandleConfigFile()
There's no pointer InputDevice
On Mon, 15 Mar 2004, Thomas Winischhofer wrote:
Robert Rozman wrote:
Hi,
I'm sending files requested to give proper help. Like I said it seems like
Xv is not working (I get lower cpu if I set -vo x11 in mplayer). I suspect
that software scaling is going on, but don't know what to do
On Fri, 12 Mar 2004, Marc Aurele La France wrote:
Please try the attached patch.
FWIW, if this patch doesn't apply cleanly, then your report is based on
out-dated information.
It applyed cleanly, but doesn't work! I made a guess that's the new gcc-3.4,
so I recompiled all (make
On Sun, 14 Mar 2004, Wes Jennings wrote:
Actually, it states the following:
Fatal server error:
Caught signal 11. Server aborting
I noticed this message. Do you figure the xboard program is sending an
abort command that the X server is picking up? That doen't make any
sense in the
On Sun, 14 Mar 2004 10:08:00 -0500
Richard Tree [EMAIL PROTECTED] wrote:
I jumped into the upgrade with both feet without taking the time to
really understand what I was doing and now can't seem to get to my Gnome
desktop. I am new to Linux and haven't quite got the startup process
figured
Hi,
I have built a debian server and recompiled it to have a minimum kernel,
no mouse, no cdrom, no video, etc.
And now I want to build a X server run on it so I can use X feature through SSH.
Is it possible?
thx
_
/
Hello there,
I am able to run the X from the Linux machine itself (I am using Redhat
Enterprise Linux Advanced Server 2.1) but not from the remote machines. I
am using a software called X-manager from the remote machine. I can work
with the Linux server from the remote machine in text mode.
I don't known whether this is still the case: there used to be a logic in the madness:
X 4.x would
first look for a config file in a file given in the command line if not found then (I
believe, not
sure anymore) in the home directory, then in /etc/X11 for XF86Config-4, if this did
not exist for
CVSROOT:/home/x-cvs
Module name:xc
Changes by: [EMAIL PROTECTED] 04/03/14 16:19:45
Log message:
Fix a typo in the nv driver.
Modified files:
xc/programs/Xserver/hw/xfree86/drivers/nv/:
nv_hw.c
Revision ChangesPath
1.7 +5 -5
Herzlichen Glückwunsch !
Ihre Regestrierung auf www.ianta-ki.de war erfolgreich .
Benützername = Sabine
Passwort = 28142678
Sie können sich ab sofort mit den daten unter www.ianta-ki.de einlggen !
Ihr [EMAIL PROTECTED]
___
Devel mailing list
[EMAIL
As cartas comerciais, têm grande importância na administração de qualquer
empreendimento, pois uma parte significativa das transações mundiais se
realiza por esse meio. A carta é o instrumento que faz a conexão entre os
negociantes.
http://www.gueb.de/modelosdecartascomerciais
Estamos lançando
On Fri, 27 Feb 2004, Paul Jarc wrote:
[I'm not subscribed. Mail-Followup-To set.]
In xc/config/cf/{host,site}.def, is there a way for the user to supply
linker flags for building shared libraries? I couldn't find one, but
I need to supply them (-L and -Wl,-R, to find certain other
Sun, 14 Mar 2004 13:09:40 -0500
Academic-Qualifications from NONACCR. Universities.
No exams. No classes. No books.
Call to register and get yours in days - 1-603-457-0203.
No more ads: http://bluster.DigXDigX.com?unsub=1001868305510
centrifugate
corroborate clearance lenore coney
As cartas comerciais, têm grande importância na administração de qualquer
empreendimento, pois uma parte significativa das transações mundiais se
realiza por esse meio. A carta é o instrumento que faz a conexão entre os
negociantes.
http://www.gueb.de/modelosdecartascomerciais
Estamos lançando
37 matches
Mail list logo
