After installing debian in one pc connected to the monitor it sets resolution automatically.So i disconnect that monitor and attach some Projector and booted my OS then its not automatically setting resolution.If i tried to reduce or increaase the resolution its not showing any other resolution
Hi!
I have a Clevo M55G notebook with 1400x1050 resolution, and
SuSE 10.0 system. The installer creates a modeline for this
resolution, but the X server silently ignores this, and uses
the next built-in resolution (1280x1024).
If I create a modeline by hand, it is accepted only for some
known
I have a system that has to support a 17inch and 15inch LCD monitor. I
want the 17 inch monitor to support 1280x1024 and the 15 inch to only
support 1024. When the system boots up the 15 inch monitor is put into
virtual 1280 mode (even though the logs correctly identify its max
resolution as
Sorry, I sent this from the wrong address the first
time.
Hello, I have been having some problems setting up my
SGI 1600SW to display correctly with XFree86 4.3. Here
is my setup.
XFree86-4.3
ATI Radion 7500 (Using DVI)
SGI 1600SW (via multilink adapter)
I located the correct modeline here
hi all,
I had compiled Xfree86
configured with XFree86 -configure
edited XF86Config to my likings
when running the server, the only available resolution was 640x480
in the log files, the problem appeared to be the horizontal sync and the
vertical refresh rates that were not set.
solution to
Greetings,
I am having difficulty getting my m305x gateway laptop to run at the
advertised 1024x768 18bit color depth. The best resolution that I have
been able to get is 800x600.
It seemed to work under WinXP, but that is gone now :)
The system is running Fedora Core 1, the chipset is Intel
I recently moved from Red Hat 9 to Fedora 1. In RH, my resolution
colors were fine. I had 1024x768 in 24-bit. When I moved to Fedora,
When I try to run XFree86 in the same settings, it locks. The best I
can do is 1024x768 in 8-bit. I've got an ATI Radeon 7000 (64MB) and a
DigiView 17
David Hansen Jr. wrote:
I recently moved from Red Hat 9 to Fedora 1. In RH, my resolution
colors were fine. I had 1024x768 in 24-bit. When I moved to Fedora,
When I try to run XFree86 in the same settings, it locks. The best I
can do is 1024x768 in 8-bit. I've got an ATI Radeon 7000
Hi,
I am using a compaque presario machine p4, intel MB,
256MB RAM.
I dual boot b/w win and rh linux 9.0.
windows gives maximum resolution (1024 x 768) at 24
bits, once the disaplay driver is provided.
but, Redhat doesnt seem to give the needed resolution,
only (800x600 max), that too with
how can I change the resolution of my Xfree server, since Mandrake
control center, the options where permit the change its disabled; I must
edit some files of config or what?
In the same way when I try to run some games like tuxracer change for a
few instants the size of the screen , but it seems
Hello,
I have a problem with the resolution of Xfree86 and running fluxbox. I've
gone into XF86Config and changed the Section screen, and Section
Display, both leading to dead ends. I'm not quite sure what to do, so as a
last resort I'm email you. Attached is my current XF86Config file. I'm not
According to the PDF on ADI's web site, this should be:
HorizSync30 - 96
VertRefresh 50 - 160
That should be capable of 1600x1200 @ 75Hz
Mark.
http://www.adi.com.tw/Menu%20Download%20c.htm
On 4 Dec 2003, Jeff wrote:
Thanks, I have an ADI
Hi Guys,
Ive got a geforce 4ti 4200 AGP8x and cant get the resolution above
1280x960. I'm running the latest nvidia drivers - are there any problems
with them?!
my config is attached.I have even tried commenting out all other
resolutions apart from 1600x1200 (the res i want) with no luck.
I
Hi Guys,
Ive got a geforce 4ti 4200 AGP8x and cant get the resolution above
1280x960. I'm running the latest nvidia drivers - are there any problems
with them?!
my config is attached.I have even tried commenting out all other
resolutions apart from 1600x1200 (the res i want) with no luck.
I
Section Monitor
Identifier Monitor0
VendorName Monitor Vendor
ModelNameADI MicroScan 17X+
HorizSync24.6 - 60.0
VertRefresh 50.0 - 120.0
Option dpms
EndSection
If those specs are correct, that monitor cannot do 1600x1200.
If it
Hello,
I need to obtain a resolution of 1920X1200 using
XFree86 4.3.0. I have been able to run XFree86 4.3.0
on LynxOS 4.0 and it is working fine.
The graphics card being used is ATI Radeon Mobility
9000 that supports an even higher resolution than
required.
Could you please tell me the maximum
Hello,
I am in an urgent need to obtain a resolution of
1920X1200 using XFree86 4.3.0.
I am using LynxOS 4.0 operating system and am running
XFree86 4.3.0 on LynxOS 4.0.
The graphics card being used is ATI Radeon Mobility
9000 that supports an even higher resolution than that
required as
Hi, My name is Fábio, and I have a display board of
Trident TGUI 9685, I would like to know how resolution i coul use and how could
I centralize the graphics pixels, etc
I recently upgraded from Linux Red Hat 7.2 to 9.0
In the upgrade, I/ve lost the ability to use hi resolutions on my
laptop. Config files and logs are attached.
Please advise. Thank you --
---
Jefferson A. Rampy
19 matches
Mail list logo
