I need to display some text on top of an Xv image.
I guess I need to arrange for the text to be rendered into the destination
window, which would have been painted in the colour of the chroma key by Xv.
Is there an easy way to do this?
Thanks,
Paul Robertson
I think this solution which will work for me...
Place a borderless window on top of the overlay window.
Paint the window with the chroma key as the background, and draw the text in
the foreground.
Paul
- Original Message -
From: Paul Robertson [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
On Fri, 7 Dec 2001, Antonio Prioglio wrote:
On Thu, 6 Dec 2001, Ferris McCormick wrote:
[..]
else to complain about. The short answer is that with David Miller's
hint, I have been able to put both screen blanking (xset s on s blank)
and DPMS support (xset dpms p q r) into the
Hi guys,
I've installed Mandrake Linux 8.1 (default installation).
I'd like to use the XFree86 4.1.0 as its driver status
shows:
4.1.0:
Support (accelerated) for the ViRGE, ViRGE/VX, ViRGE/DX,
ViRGE/GX, ViRGE/GX2, ViRGE/MX, ViRGE/MX+, Trio3D and
Trio3D/2X is provided by
the s3virge driver.
On Mon, 10 Dec 2001, Martin Held wrote:
Hello, I am in the market for buying a Radeon 8500, and read your post to
the Xpert mailing list. Have you found DRI to be working yet at all in
CVS? I like to be able to play my DVD's under linux, and I only use
Windows for gaming. The 8500 has
Gabiele,
Would you mind sending me your XF86Config-4 file off list ? I've tried forcing the
chipset w/out success.
My email is [EMAIL PROTECTED]
Thanks in advance,
Cheers,
Olivier.
On Tue, 11 Dec 2001 11:24:57 -0400
gabriele castellini [EMAIL PROTECTED] wrote:
Hi
I am happy to be able
yesterday in a fit of optimism i wrote:
, doing some research on the logitech itouch keyboard has
led me to the conclusion that my keyboard generates the same scancodes
that it does, though with different keysyms. so i can probably make
use the itouch xkb keyboard map pretty much
On Tue, 11 Dec 2001, Andre Werthmann wrote:
when I try use the kernel sisfb (kernel 2.4.17pre8), the kernel module
gives me an oops.
You sayed it works for you, have you used any special patches ?
Where can I find Torsten's DRIVER_CTX_CTOR/DTOR fixes ?
They're in the kernel already.
PROTECTED] and patches submitted
to [EMAIL PROTECTED] Before reporting bugs in pre-release versions,
please check the latest version in the XFree86 CVS repository
(http://www.XFree86.Org/cvs)
XFree86 Version 4.1.99.1 (Unofficial Build: 4.1.99.1-20011211) / X Window System
(protocol Version 11, revision
At 08:26 AM 12/11/01, Noah Romer wrote:
On Mon, 10 Dec 2001, Martin Held wrote:
Hello, I am in the market for buying a Radeon 8500, and read your post to
the Xpert mailing list. Have you found DRI to be working yet at all in
CVS? I like to be able to play my DVD's under linux, and I only
Hi,
How do I get the latest version of X (4.1.0-99?) from the CVS repository?
Mookerjea
___
Xpert mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xpert
i still don't get any events from my internet keys though. is there
something else i have to turn on or enable? the other odd thing is that
the ctrl:swapcaps setting doesn't seem to work for me, making me think
i really have screwed something up. bear in mind that i've been running
On Tue, Dec 11, 2001 at 11:05:28AM -0500, Paul Fox wrote:
yesterday in a fit of optimism i wrote:
, doing some research on the logitech itouch keyboard has
led me to the conclusion that my keyboard generates the same scancodes
that it does, though with different keysyms. so i can
On Tue, Dec 11, 2001 at 11:32:06AM -0500, Paul Fox wrote:
i still don't get any events from my internet keys though. is there
something else i have to turn on or enable? the other odd thing is that
the ctrl:swapcaps setting doesn't seem to work for me, making me think
i really have
On Tue, 2001-12-11 at 07:45, Carl Wilhelm Soderstrom wrote:
I built X from CVS; and got it to install. however, DRI doesn't work. :(
glxinfo says it's using indirect rendering, and games are dead slow.
this was a config that had DRI working before; so I know it's possible.
I installed X to
but something else occurred to me: does version 4.0.1a, which is what
i'm running, have the necessary support for internet keys? when did
the code snippet that david dawes quoted yesterday get added, relative
to the release train?
It should be there in 4.0.1. In that version you
I have a notebook with SIS 630 video
card.
When i try to install Mandrake 8.X or RedHat 7.X in
EXPERT MODE,
its install in my PC XFree 3.3.6, no XFree 4.1.
Why ?
How i can install Mandrake or RedHat so who its
install in my PC XFree 4.1 ?
--
Best regards...
Fabio Dell'Aria
E-mail:
On Tue, 11 Dec 2001, Bhaswati Mookerjea wrote:
Hi,
How do I get the latest version of X (4.1.0-99?) from the CVS repository?
http://www.xfree86.org/cvs/
Don't use a branch tag and you get latest CVS.
Mark.
___
if so, how do I tell it where the proper libraries are?
Set LD_LIBRARY_PATH=/usr/local/X11R6/lib:$LD_LIBRARY_PATH or add it to
/etc/ld.so.conf (probably before /usr/X11R6/lib) and run ldconfig.
thanks. I figured it was something like that. still new to library
path
Hi:
I have a Linux RedHat 7.1 with Xfree 4.03 and a trident
9680 vga card with 1mb ram and I am using it at 8000x600@60hz. The mouse pointer
looks allright and it points to to the right place (according to the mouse
things are where they have to be and if I point the lower right part of the
--- Noah Romer [EMAIL PROTECTED] wrote:
On Mon, 10 Dec 2001, Martin Held wrote:
Hello, I am in the market for buying a Radeon 8500, and read your post to
the Xpert mailing list. Have you found DRI to be working yet at all in
CVS? I like to be able to play my DVD's under linux, and I
I have a new ATI Radeon 8500, and it's not being detected by XFree86.
I had it shipped next day air direct from ATI so It may not even be a
week old.
I'm running Debian (Woody) and am having trouble recompiling XFree86 in the
Debian manner. I also was trying to get the cvs working, it seems
On Tue, 11 Dec 2001, Mike Mestnik wrote:
--- Noah Romer [EMAIL PROTECTED] wrote:
On Mon, 10 Dec 2001, Martin Held wrote:
Hello, I am in the market for buying a Radeon 8500, and read your post to
the Xpert mailing list. Have you found DRI to be working yet at all in
CVS? I like
On Tue, Dec 11, 2001 at 09:06:21PM +0100, Olivier Fourdan wrote:
Alan,
Sorry, but although the card is correctly detected, the driver doesn't
work well for me (CyberBladeXPAi1, Toshiba S1800-814)
In 16 and 24bpp the display shows a lot of noise, especially when moving
windows/cursor.
The question, then the context:
I have a bitmap, A. I set this bitmask as the clip mask
in my GC. If I modify A, do I have to re-call XSetClipMask()
for the modifications to take effect?
I have a square area, lets say 400x400. I frequently re-paint the
whole area with different sections of a
Alan,
Try a 60Hz mode.
I'll try that in a few minutes...
Turn on ShadowFB and you should get the same speed as Vesa and FBDev.
Humm, nope, ShadowFB is on in my XF86Config-4 :
Section Device
Identifier Trident
Driver trident
BoardName cyberbladeXPAi1
Hi,
I've got a problem getting DGA to work properly with a Radeon mobility LY
(AGP). The application I try to use with DGA is VMWare 3.0. When switching to
fullscreen mode in VMWare the display gets completely scambled. (you can see
mouse moves by appearing horiz. lines, but that's all you
On Tue, 11 Dec 2001, Jonathan Walther wrote:
The question, then the context:
I have a bitmap, A. I set this bitmask as the clip mask
in my GC. If I modify A, do I have to re-call XSetClipMask()
for the modifications to take effect?
Yes.
I have a square area, lets say 400x400. I
On Tue, 2001-12-11 at 22:06, Stefan Oettl wrote:
I've got a problem getting DGA to work properly with a Radeon mobility LY
(AGP). The application I try to use with DGA is VMWare 3.0. When switching to
fullscreen mode in VMWare the display gets completely scambled. (you can see
mouse moves
On Tue, Dec 11, 2001 at 09:49:37PM +0100, Olivier Fourdan wrote:
Try a 60Hz mode.
I'll try that in a few minutes...
Turn on ShadowFB and you should get the same speed as Vesa and FBDev.
Humm, nope, ShadowFB is on in my XF86Config-4 :
Section Device
Identifier Trident
Paulo Igor Nascimento wrote:
Hi guys,
I've installed Mandrake Linux 8.1 (default installation).
I'd like to use the XFree86 4.1.0 as its driver status
shows:
4.1.0:
Support (accelerated) for the ViRGE, ViRGE/VX, ViRGE/DX,
ViRGE/GX, ViRGE/GX2, ViRGE/MX, ViRGE/MX+, Trio3D and
Thank you Mark. Your description was just what the doctor ordered. I
can get rid of clip masks entirely now, and a bunch of other
extraneous operations.
Thanks to your description, I don't need to know the following
information now, but its been bugging the heck out of me:
how did Keith
Hi there,
I have a Toshiba Satellite 1800-S204 with a Trident
cyberbladeXPAi1 video chip and of course RedHat 7.0 did not recognize it. I
upgraded to XFree-4.1.0 but no improvement. I recently downloaded and installed
the latest
CVS of December 4 and although everything seemed to
be
ok,
Hi
This is the configuration file that worked for
me.
Gabriele
P. S. I did some cut and paste in order to include
the XF86Config file below. Since I am not familiar with microsoft oriented
programs I don't know if this includes some extra control characters that will
need to be removed
Around 1 o'clock on Dec 11, Jonathan Walther wrote:
What is the method that involves the least amount of X calls, or at
least is the fastest possible, method to repaint my window?
You can do this in one call with the Render extension -- create a 1 bit
mask that has 0 where the image is and
Around 16 o'clock on Dec 11, Jonathan Walther wrote:
Thanks to your description, I don't need to know the following
information now, but its been bugging the heck out of me:
how did Keith Packard make his twn menu-windows translucent?
Serious server hacking suitable for a rigged demo only.
On Tue, Dec 11, 2001 at 06:42:01PM -0800, Keith Packard wrote:
What is the method that involves the least amount of X calls, or at
least is the fastest possible, method to repaint my window?
You can do this in one call with the Render extension -- create a 1 bit
mask that has 0 where the
I have probably the worst configuration :-(
ASUS A1000 series laptop with 14.1 LCD (1024x768x15)
Silicon Integrated Systems [SiS] SiS630 GUI Accelerator+3D (rev 11) (prog-if 00 [VGA])
Subsystem: Asustek Computer, Inc.: Unknown device 1452
Flags: 66Mhz, medium devsel
BIST result: 00
Memory at
On Tue, Dec 11, 2001 at 05:07:02PM -0800, Mark Vojkovich wrote:
Actually, if the arrow is simple, the fastest way to draw
it would be with a rectangle and a polygon (triangle). That
would be faster than an arrow shaped stipple.
Alas, the arrow is a png that uses 200 different colors, plus
Around 20 o'clock on Dec 11, Jonathan Walther wrote:
Alas, the arrow is a png that uses 200 different colors, plus has alpha
channel information which I'm ignoring for now.
You'll end up using the Render extension sooner or later in any case; the
alpha channel information can't be used with
Hi
I am happy to be able to say that finally I got a good screen
configuration on my Toshiba 1800-S204 laptop
with a trident cyberbladeXPAi1 chip. It took me a lot of attempts but
this is what I did.
I installed RedHat 7.0 that comes with XFree86-4.0.1 and it did not
detect my card.
Next I
On Tue, Dec 11, 2001 at 11:24:57AM -0400, gabriele castellini wrote:
Hi
I am happy to be able to say that finally I got a good screen
configuration on my Toshiba 1800-S204 laptop
with a trident cyberbladeXPAi1 chip. It took me a lot of attempts but
this is what I did.
I installed RedHat
snip
The strange thing is that if I force the chipset as a cyberbladeXPAi1,
which is what it should be, then it does not work. I wonder if this
is a bug or something is wrong with my setup.
How about this as a clue: On my 1805-274 when I look at Windoze XP the
chip is reported as a
Hi,
Somebody knows about DVD? or am I in the wrong place.
I would like to know about the software and the steps to install this
software.
Thanks in advance for your help.
Fernando
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On
Behalf Of gabriele castellini
Sent:
44 matches
Mail list logo