On Tue, 26 Feb 2002, Matthew Smith wrote:
I am designing an information system which presently has two networked
PCs in a box, one driving a touch screen and the other displaying
(different) information through a window.
The human/machine interface is Mozilla running straight on top of
On Mon, 25 Feb 2002, Bjoern Fischer wrote:
My problem : I find 2D acceleration pretty poor. Despite I compiled
a kernel without even sound drivers and with agpgart, when moving
quickly a window (for instance, the gdm window after boot), the
movement isn't smooth at all : it looks choppy. I
I had the same problem, take a look at the following, fixed it for me.
http://xfree86.org/pipermail/xpert/2002-February/015571.html
On Mon, Feb 25, 2002 at 05:48:16PM -0500, Antonio MATTA wrote:
Hello guys:
I hava a i810 video chipset. I have followed all the instructions to make
dri to
Hi,
under X. I am having difficulties with getting X going and would
appreciate if you could send me a) your XF86Config-4 file, b) any tips
I'm unclear. Are you using a Tecra 9000 ? If not my config file won't
help you. It won't help you anyway it's pretty stock standard as
produced
Hello all,
Yes, I've done the legwork to try and find out what the proper XF86Config-4 settings
should be. I've tried turning off gpm, and going directly to /dev/psaux, without
success.
Here is my setup:
Dell Optiplex GX1
Debian Linux (woody, 2.4.17)
XFree86 4.1.0.1
MS Intellimouse PS/2
Hello list,
I have some troubles in setting up my notebook for both
CRT and LCD output. I tried to find some documentation
about this issue but did not find anything! The situation
is as follows:
Both outputs work and I can even switch between LCD, CRT and
LCD/CRT-mode with Fn-F6 but I don't
Hi!
I would like to have some comments about that...
Using a VESA card with the XF86_FBDev server you don't need
to worry about the monitor and the resolution, but you must
specify the DefaultDepth.
I don't understand why this parameter can't be autodetect
directly from the kernel.
Having such
On Mon, Feb 25, 2002 at 07:49:21PM +0100, Nino Margetic wrote:
under X. I am having difficulties with getting X going and would
appreciate if you could send me a) your XF86Config-4 file, b) any tips
I'm unclear. Are you using a Tecra 9000 ? If not my config file won't help you.
It
Hi all,
I'm running Xfree 4.2.0 on an ATI Radeon VIVO (now known as Radeon 7200, according to
ATI new specifications) under Debian 3.0 Woody.
First of all, my system :
Athlon 1.2 GHz
512Mo PC133 / 2x IBM DTLA30 30 Go = 60Go
MSI K7T Turbo mainboard (VIA KT133A chipset)
Terratec 512i
I have gone through alot with this.Basically
when i first installed, I boot up using "Linux" mode on LILO and it gives me a
login prompt with the ASCII tux penguin, then my screen goes Black. I was
told its X trying to start, and can't so its some kind of loop. I have
tryed
hi All.
I have two qestions:
How can I get pointer idle time, I need it for my own screen saver
activation, and he secon I can I change teh core pointer wen the XSrever
is running, without xserver restart ?
Thanks for reply..
Gustaw
Hello,
I'm running slackware linux 7.1 (i believe),
and when i attempt to run startx I get the following error
Fatal server error:
Cannot establish any listening sockets - Make sure an X server isn't
already running.
I have tried rebooting the server, tried
runnning XF86configure, X -configure,
Hi,
I tried to compile drm 4.2.0 in order to be able to install XFree86-4.2.*,
but it failed. Do you know what I am missing?
[root@hugin drm]# make -f Makefile.linux
Error: Could not locate kernel tree in /lib/modules/2.2.14-12/build/include
/usr/src/linux-2.2.14-12/include
Dear Sir,
I have just devleoped a X input driver for my small graphic tablet.
It is a small tablet that is very popular in Hong Kong, Taiwan and China
for Chinese handwriting recoginition. It is working now. I have cursor
that will move according to mouse OR graphic tablet.
Hi everyone,
I have a problem with XFakeButtonEvent. Two Sun boxes are connected using
TCP/IP. One track the mouse event and send it to the other. The other would
call XFakeButtonEvent to simulate down or up. But If I keep double clicking
for sometimes the other won't response anymore. It
I have a problem concerning memory consumption. After boot, the Xserver
consumes only a few MB of memory. With increasing uptime the used amount of
memory rises, just until the kernel kills some processes to stay alive.
I heard that 4.1.0 had a problem with font antialiasing, and disabled
Hi.
I installed RHL 7.2 on my Toshiba 1800-814 laptop and everything
was Ok except that I can not run X.
I have seen from previous messages that this is not a new problem and
that it has something to do with the video card.
After reading previous messages looking for some help I'm now more
This is a forward from the Peanut Forum..
One of our Guru's seem's to be very frustrated... ( he's trying to get
the drm
kernel modules to work with 2.4.17 | 2.5.0 /XFREE86 4.2.0)
quoted remarks follow
Yak!. Nothings worked.
I've been using the patches rc2 and rc2-ac2. I'm going to try
On Mon, 25 Feb 2002, Chris Goldman wrote:
Hello all,
Yes, I've done the legwork to try and find out what the proper XF86Config-4 settings
should be. I've tried turning off gpm, and going directly to /dev/psaux, without
success.
Here is my setup:
Dell Optiplex GX1
Debian Linux
Hello guys again:
I am still trying to set up my i810 to work with DRI.
After following many of your advices I still have the same problem:
(WW) AGPIOC_ACQUIRE failed (Device or resource busy)
(EE) GARTInit: AGPIOC_INFO failed (Invalid argument)
Could any body please tell me what is wrong?
I'm looking into writing of video device drivers
for x11 and am wondering if there are any resources
available that can make the learning process a
little bit easier.
If anyone can direct me to well commented drivers,
sample skeleton drivers or any other useful
resources I would appreciate
- Original Message -
From: Andrew Daviel [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Sunday, February 24, 2002 2:39 PM
Subject: [Xpert]junk following cursor in X (ATI Rage II)
The problem:
In an X app (xdoom, or gnuterm/kterm etc.) there is junk following the
cursor around.
I would like to ask you for advice on how to upgrade from 3.3.6. to 4.x
and what the recommanded 4.x version that are more stable and do
supports Geforce2 MX series chipset or closely matched chipset that I
could use without losing all the settings and other things, try to
explain in easy step by
hello,
i want to change the WM_CLIENT_LEADER property of a window with xprop.
typing
xprop -set WM_CLIENT_LEADER 0x82
lets me click on a window to change, but gives out the error:
xprop: error: unsupported conversion for WM_CLIENT_LEADER
I tried some other variants, but i
On Die, 2002-02-26 at 17:37, ODOU Michel wrote:
1- Why does is DRI code used for 2D acceleration ? I thought it was a
sort of API (like OpenGL), and didn't expect it to be used in 2D.
Not actually DRI code is used but the CP engine via the DRM.
2- This doesn't solve my problem : DRI works
On Tue, 26 Feb 2002, ODOU Michel wrote:
Well, Mike, I understood but I still have some remarks :
1- Why does is DRI code used for 2D acceleration ? I thought it
was a sort of API (like OpenGL), and didn't expect it to be used
in 2D.
Common misconception. DRI is an interface between userland
On Sat, Feb 23, 2002 at 09:19:14AM -0800, Doug Fong wrote:
and when i attempt to run startx I get the following error
Fatal server error:
Cannot establish any listening sockets - Make sure an X server isn't
already running.
Have you used either 'lsof' or 'netstat -lnp --inet' to see what's
On Sun, 24 Feb 2002, Tankred Mueller wrote:
I have a problem concerning memory consumption. After boot, the Xserver
consumes only a few MB of memory. With increasing uptime the used amount of
memory rises, just until the kernel kills some processes to stay alive.
I heard that 4.1.0 had a
On Tue, 26 Feb 2002, Stephen Wenzler wrote:
I would like to ask you for advice on how to upgrade from 3.3.6. to 4.x
and what the recommanded 4.x version that are more stable and do
supports Geforce2 MX series chipset or closely matched chipset that I
could use without losing all the settings
I am using the latest CVS from Xfree and the introduction of Quake III is
not working.I have changed xc/xc/lib/GL/mesa/src/drv/mga/mga_xmesa.c line
220 from __driMesaMessage(...) to __driUtilMessage(...) as Klaus Rose
suggested and although I can play the game, the introduction renders the
first
On Mon, Feb 25, 2002 at 04:25:49PM +0100, Thomas Winischhofer wrote:
José Romildo Malaquias wrote:
Not all SiS chipsets are supported by the current driver. DRI is only
available for the 300/540/630/730. 2D accelleration is also supported on
the 530 and some older 55xx chipsets.
31 matches
Mail list logo