Fai wrote:
Hello! I am new to this mailing list!
Hi Fai!
[...]
the other is SiS6325, which XFree86 4.x is no supported but reported
as valid screen, very strange!
Are you sure you mean 6325 and not 6326?
The SiS632_6_ is supported by the SiS driver in 4.2. However, I could
not test
Is it possible to run XFree on an NOMMU device?
I need an X frontend for an m68k without mmu system, just to export window
on network exporting display.
Is there a minimal implementation of X?
Any suggestion will be appreciate.
Mirco Cremasco
I have a thinkpad A20p with a 16MB ATI Rage 128 Mobility L chip, running
Linux (Mandrake, but with kernel 2.4.17) and XFree 4.2.0
I have two small problems...
1. If DRI is enabled, then on resuming from suspend or hibernation, the
X server will die... Or lock up...
2. If running without DRI
On Die, 2002-03-12 at 11:41, Hamish Marson wrote:
I have a thinkpad A20p with a 16MB ATI Rage 128 Mobility L chip, running
Linux (Mandrake, but with kernel 2.4.17) and XFree 4.2.0
I have two small problems...
1. If DRI is enabled, then on resuming from suspend or hibernation, the
X
Michel Dänzer wrote:
On Die, 2002-03-12 at 11:41, Hamish Marson wrote:
I have a thinkpad A20p with a 16MB ATI Rage 128 Mobility L chip, running
Linux (Mandrake, but with kernel 2.4.17) and XFree 4.2.0
I have two small problems...
1. If DRI is enabled, then on resuming from suspend
Hi Andris,
Thank you for your quick response!
Andris Pavenis writes:
Tried (started startx locally and attached to X from remote SSH session).
Recompiled dispatch.c with debug info, but there were litle use of it as
I anyway don't know where pGC-ops-CopyArea points to.
Yes, this
On Mon, Mar 11, 2002 at 04:45:21PM +, Alan Hourihane wrote:
I've released a binary driver to replace the current one in XFree86 4.2.0
that supports acceleration on the CyberBladeXP series chips.
I need to clean up the source code at the weekend and I'll be getting
it into XFree86's CVS,
Hello,
do somebody know, how I can setup my X, to run a resolution of 320x240?
I have a small display, which only can run in this resolution.
I know some things about modelines and I have some information about the sync -
signals of the display
but I can't justify 320x240, so that it will looks
Thomas Winischhofer writes:
The SiS632_6_ is supported by the SiS driver in 4.2. However, I could
not test this. (So I leave this question to you, Egbert!)
Last time I checked the 6326 workd well - at least for me.
Egbert.
___
Xpert mailing
I can't remember if I've complained about this here or not. I'm sorry
if this is a repost. I can't seem to get my IBM Thinkpad to drive an
external monitor. I have an A22m 2628-STU. XFree86 reports it has an
ATI Rage 128 Mobility LF rev 2. Nothing I've tried (multiple monitors
at multiple
I have finally made X Windows work booting from a compressed file system.
It didn't work when the whole filesystem was in memory (although it was readwrite).
It works when the file system is is memory EXCEPT /var and /tmp, which are now in a
read-write disk partition.
Isn't it strange?
Although
I have recently installed SuSE 7.3 Linux (using XFree86 4.1.0) on a machine
that had been running Red Hat 6.0 (and XFree86 3.?) without incident since
1999. The graphics card is an Elsa Gloria Synergy, which uses a 3Dlabs
Permedia 2 graphics processor.
I am experiencing a problem similar
On Die, 2002-03-12 at 16:49, Doug Alcorn wrote:
I can't remember if I've complained about this here or not. I'm sorry
if this is a repost. I can't seem to get my IBM Thinkpad to drive an
external monitor. I have an A22m 2628-STU. XFree86 reports it has an
ATI Rage 128 Mobility LF rev 2.
On Mon, Mar 11, 2002 at 02:41:40PM -0500, Shaya Potter wrote:
I'm having a hard time figuring out how to build TinyX
I made a host.def file in config/cf/ that looks like
#define KDriveXServer YES
#define TinyXServer YES
#define BuildServersOnly YES
but when I did a make world, it
Hi,
I'm in posession of a trident chipset (cyberbladei1d) with 8M and a
nice 14 dstn (1024x768) display which gives me some problems with
the display being offset several pixels, here's the symptoms:
-in 1024x768, the entire display is offset 3 pixels to the right
-in 800x600 stretched, all
Michel Dänzer [EMAIL PROTECTED] writes:
man r128, Option Display
I had that option set to BIOS, but was using the ati driver instead of
the r128 driver. I plugged into a monitor, low and behold I could run
X on it!
My only complaint at this point is that it didn't support using the
Fn+F7 to
I was wondering who the maintainer for the radeon driver under X is. I
am trying to get my Radeon VE to work and it is really difficult because
from what I have heard the ATI driver is crap. If that isnt true please
forgive me, but I would really like to talk to who ever is maintaining
this
I've got a Chips and Technologies 65548 (1MB ISA, on a Fujitsu Point 510),
which is normally able to do 800x600x16bit, after a bit of tweaking (read:
altering the clock to 25.18, and altering hsync to 24-25 and vrefresh to
39-40) in 3.3.6, it comes up with some out of memory errors, but
Hello all,
I am a real newbie at this linux/XFree stuff so I'll apologize up front if
the question is totally basic.
I was wondering if anyone has managed to get X running on an Omnibook
xt6050? It is almost working for me. With the latest version of the kernel
(2.4.18) as well as XFree v.
On Die, 2002-03-12 at 19:44, Doug Alcorn wrote:
Michel Dänzer [EMAIL PROTECTED] writes:
man r128, Option Display
I had that option set to BIOS, but was using the ati driver instead of
the r128 driver. I plugged into a monitor, low and behold I could run
X on it!
That's strange though,
Scott Henson wrote:
I was wondering who the maintainer for the radeon driver under X is. I
am trying to get my Radeon VE to work and it is really difficult because
from what I have heard the ATI driver is crap. If that isnt true please
forgive me, but I would really like to talk to who
On Wed, Mar 13, 2002 at 02:46:31PM +1100, Dave Horsfall wrote:
Yes, I searched the archives, but the solutions therein don't seem to
apply here.
You're displaying X apps to an Xplora Xterminal. It only knows the X
extensions that are built into Xncdxpl (not a whole lot). The extensions
involve
Dave Horsfall wrote:
On Tue, 12 Mar 2002, Derrik Pates wrote:
You're displaying X apps to an Xplora Xterminal. It only knows the X
extensions that are built into Xncdxpl (not a whole lot). The extensions
involve X-server-side code - since the X server doesn't support them,
you can't
On Tue, 2002-03-12 at 22:29, Joe Krahn wrote:
Scott Henson wrote:
I was wondering who the maintainer for the radeon driver under X is. I
am trying to get my Radeon VE to work and it is really difficult because
from what I have heard the ATI driver is crap. If that isnt true please
24 matches
Mail list logo
