Hi all,...
...first of all, being new to the list, just wanted to say Hello to anyone
out there -
I'm Kristian. :)
Secondly, I am having one question by now: In my machine (PII-350, 192 meg
RAM, Slackware Linux 8 w/ XFree86 4.2.0), by now there is an Elsa Erazor III
LT graphics board (with
On Sat, 30 Mar 2002, Egbert Eich wrote:
Dr Andrew C Aitchison writes:
Once you get the card installed, run
X -configure
this will give you a sample config file (which may need tweaking,
especially for mouse support). In the Device section there will be a line
#Option
On Sun, 31 Mar 2002, martin f krafft wrote:
It should support encryption (I'm thinking ssh or ssl) by default,
and compression where appropriate (a number of X protocol compression
schemes have been proposes, but none have really taken off).
it needn't support anything. it should use
hi,
I whant to know how xfree is handling the window stack.
Is it an tree list? array? In what source file sould i check?
That because i'm working on a gui inside an window to be use
in games(but not limited to) for exemple. i have a lot of
probleme whit my current desing. i belive xfree
Vladimir Dergachev writes:
Are you sure that is the correct log ?
First of all XFree86 version is 4.1.0.1 - way old.
Secondly, it says right there: VESA(0) Initializing int10.
I cannot fetch the log until Tuesday. Therefore I
would have preferred to have it as email.
Does it say
also sprach Mark Vojkovich [EMAIL PROTECTED] [2002.03.31.0336 +0200]:
You have to turn them on in your shell. That's the
limit coredumpsize in tcsh. I think it was ulimit -c
in bash. See your shell's man page.
okay, i'll do my best to get a core dump... stay tuned...
--
martin;
also sprach Vladimir Dergachev [EMAIL PROTECTED] [2002.03.31.0421 +0200]:
Are you sure that is the correct log ?
yes.
First of all XFree86 version is 4.1.0.1 - way old.
yeah, i know. but debian doesn't have 4.2.0 out yet.
Secondly, it says right there: VESA(0) Initializing int10.
well,
also sprach Mark Vojkovich [EMAIL PROTECTED] [2002.03.31.0336 +0200]:
You have to turn them on in your shell. That's the
limit coredumpsize in tcsh. I think it was ulimit -c
in bash. See your shell's man page.
i set ulimit -c 1048576 (1Gb) and reproduced the error, but there was
no
On Son, 2002-03-31 at 11:33, Kristian Rink wrote:
...first of all, being new to the list, just wanted to say Hello to anyone
out there -
I'm Kristian. :)
Secondly, I am having one question by now: In my machine (PII-350, 192 meg
RAM, Slackware Linux 8 w/ XFree86 4.2.0), by now there is
On Sun, 31 Mar 2002, martin f krafft wrote:
also sprach Vladimir Dergachev [EMAIL PROTECTED] [2002.03.31.0421 +0200]:
Are you sure that is the correct log ?
yes.
First of all XFree86 version is 4.1.0.1 - way old.
yeah, i know. but debian doesn't have 4.2.0 out yet.
Secondly, it
Hi.
I'm wondering of the status of the Silicon Motion Lynx 3DM driver?
I've tried it once before, and I can't seem to get a decent frame rate
when playing DVD and DivX movies (I can when using Windows). This is a
Pentium III 600Mhz processor with 128 MB ram, so the hardware should be
sufficient?
On 31 Mar 2002, Michel [ISO-8859-1] Dänzer wrote:
On Son, 2002-03-31 at 11:33, Kristian Rink wrote:
...first of all, being new to the list, just wanted to say Hello to anyone
out there -
I'm Kristian. :)
Secondly, I am having one question by now: In my machine (PII-350, 192 meg
On 31 Mar 2002, lurwas wrote:
Hi.
I'm wondering of the status of the Silicon Motion Lynx 3DM driver?
I've tried it once before, and I can't seem to get a decent frame rate
when playing DVD and DivX movies (I can when using Windows). This is a
Pentium III 600Mhz processor with 128 MB ram, so
On 31 Mar 2002, Michel Dänzer wrote:
On Son, 2002-03-31 at 11:33, Kristian Rink wrote:
...first of all, being new to the list, just wanted to say Hello to anyone
out there -
I'm Kristian. :)
Secondly, I am having one question by now: In my machine (PII-350, 192 meg
RAM,
On Sun, 31 Mar 2002, Bobakitoo wrote:
hi,
I whant to know how xfree is handling the window stack.
Is it an tree list? array? In what source file sould i check?
That because i'm working on a gui inside an window to be use
in games(but not limited to) for exemple. i have a lot of
Wow, that was a quick answer. I'm sorry to say, that I cannot try the xv
tip myself right now, since I'm running Windows on the machine. But i
will try it later.
If someone out there, could fix this, please do.
If not, I might try to fix it myself, altough I have no experience
developing device
Dr Andrew C Aitchison writes:
Option Overlay
is sufficient on my Millennium and my G550,
OK, I've checked the code, looks like you are right.
Regards,
Egbert.
___
Xpert mailing list
[EMAIL PROTECTED]
Mark Vojkovich writes:
Looking at the code for the siliconmotion driver in the tree, I'm
not surprised. It looks like the driver is polling until the retrace
everytime it has to put a frame. I would expect that to eat up more
CPU than just doing all the video in software. You
Mark Vojkovich writes:
On Sun, 31 Mar 2002, martin f krafft wrote:
also sprach Mark Vojkovich [EMAIL PROTECTED] [2002.03.31.0336
+0200]:
You have to turn them on in your shell. That's the
limit coredumpsize in tcsh. I think it was ulimit -c
in bash. See your shell's
If you are applying a patch, and needs some testing done, I'm willing to
volunteer for that part
On Sun, 2002-03-31 at 22:43, Egbert Eich wrote:
Mark Vojkovich writes:
Looking at the code for the siliconmotion driver in the tree, I'm
not surprised. It looks like the driver is
On Sun, 31 Mar 2002, Egbert Eich wrote:
Mark Vojkovich writes:
Looking at the code for the siliconmotion driver in the tree, I'm
not surprised. It looks like the driver is polling until the retrace
everytime it has to put a frame. I would expect that to eat up more
CPU
I really don't know if anyone succed to enable 1400x1050 resolution on
XE3. All I manage to get is 1280x1024 and reporting that 1400x1050 is
not valid.
The other thing that bugs me is mplayer that reports no valid xvideo
extension.
I've included my XF86Config and log file.
I've been trying
On Sun, 31 Mar 2002, Vladimir Dergachev wrote:
On Sun, 31 Mar 2002, Egbert Eich wrote:
Mark Vojkovich writes:
Looking at the code for the siliconmotion driver in the tree, I'm
not surprised. It looks like the driver is polling until the retrace
everytime it has to put a
On Sun, 31 Mar 2002, Mark Vojkovich wrote:
On Sun, 31 Mar 2002, Vladimir Dergachev wrote:
On Sun, 31 Mar 2002, Egbert Eich wrote:
Mark Vojkovich writes:
Looking at the code for the siliconmotion driver in the tree, I'm
not surprised. It looks like the driver is
Around 4 o'clock on Apr 1, Vedran Rodic wrote:
I did something similiar weeks ago and sent a diff to Marc La France. I
should have sent it to this list too :)
My patch is larger than yours, since I took more code from Gatos and added
offscreen images support.
Yes, that would be useful as
25 matches
Mail list logo