In case this isn't known:
gcc -O2 -fsigned-char-I.
[...]
-I../../../../../../exports/include -Dlinux -D__powerpc__
-D_POSIX_C_SOURCE=199309L -D_POSIX_SOURCE -D_XOPEN_SOURCE -D_BSD_SOURCE
-D_SVID_SOURCE -D_GNU_SOURCE -DSHAPE -DXINPUT -DXKB -DLBX -DXAPPGROUP
-DXCSECURITY -DTOGCUP
On Fri, 20 Sep 2002, Jon Lech Johansen wrote:
Attached are patches for missing $(DESTDIR).
I've send similar patches to xfree-patch about 2 weeks ago.
But they are not commited so far :(
bye
ago
--
[EMAIL PROTECTED]
http://www.gotti.org ICQ: 126018723
Hi
I am trying to get XFree86 to work with two monitors with a SIS
6326 card and an ATI Rage Fury 128 card. I can get it to work with one
of them at a time but it refuses to work with both of them. My
configuration is below and I have attached the XFree86 log. Could
somebody tell me what
On Fre, 2002-09-20 at 12:54, Charlie Grosvenor wrote:
I am trying to get XFree86 to work with two monitors with a SIS
6326 card and an ATI Rage Fury 128 card. I can get it to work with one
of them at a time but it refuses to work with both of them. My
configuration is below and I have
Title: RE: [Xpert]Setting Up Radeon 9000 Pro (R250 Chip)
As far as i have read on the list in a posting from hy0
there was a patch against XFree86 development branch that
made it into the CVS. This might add support new ATI chipsets.
AFAIK X4.2.1 differs from X4.2.0 only in a fixed
On Fri, 20 Sep 2002, Charlie Grosvenor wrote:
Hi
I am trying to get XFree86 to work with two monitors with a SIS
6326 card and an ATI Rage Fury 128 card. I can get it to work with one
of them at a time but it refuses to work with both of them. My
configuration is below and I have
Thank you that worked.
Charlie
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf
Of Dr Andrew C Aitchison
Sent: 20 September 2002 12:27
To: [EMAIL PROTECTED]
Subject: Re: [Xpert]Dual Head with SIS 6326 and ATI Rage Fury 128
On Fri, 20 Sep 2002, Charlie
I've played around with trying to get my dual head hardware working, ATI
Radeon VE with vga and digital out. I've tried all kinds of
configurations to no avail. The best I get is a mirrored image on both
monitors.
I'm including the entries below I noted from a previous poster because
my
NL Well I change that and I still can't get X to run on my clients.
Are you using xdm (which is what I've assumed)? Xinit or startx? Or
perhaps kdm, gdm or somesuch?
If you're using xinit, you should put the path to Xvesa on the xinit
command line, or else have the X symlink point at Xvesa.
Hallo X experts,
I have created first version of extended xkb/symbols/inet file,
describing many new and incompatible EAK (Easy Access Key) keyboards.
It is based on database collected by LinEAK project with key naming
changed near to XF86 conventions. http://lineak.sourceforge.net
I expect
You need to get a newer version of the sis driver from thomas' site.
http://www.winischhofer.net/linuxsis630.shtml
The older ones did not work properly with multiple cards.
Alex
---
Hi
I am trying to get XFree86 to work with two monitors with a SIS
6326 card and an
Hi,
I have tried to build XFree86-4.2.1 (I got a patch in ftp.xfree86.org), with
Gcc 2.96.
After I have done the make install, I try to start X, the following error
occurs.
Elf_RelocateEntry() Unsupported relocation type 4
Elf_RelocateEntry()
http://zap.crl.dec.com/randr.pdf
http://zap.crl.dec.com/randr.ps
http://zap.crl.dec.com/randr/randr.html
Have the Usenix paper (which should be available on the Usenix web site,
but for some reason, it isn't: I've complained at them to fix this).
- Jim
I'm no Xpert on this, but it appears that someone forgot to put -fPIC
in one of the makefiles?
That would cause the _GLOBAL_OFFSET_TABLE linkage error...
Scott
On Fri, 20 Sep 2002 16:09:42 +0800
Jacky, Lau [EMAIL PROTECTED] wrote:
Hi,
I have tried to build XFree86-4.2.1 (I got a
Am Aoine, 2002-09-20 ag 06:50, scríobh Kevin E Martin:
Thanks for finding this problem. I have checked in the changes to
radeon_reg.h to add this register.
BTW, I only have x86 test machines, so I would be very interested to
hear if there are any other problems with this patch.
Thanks
fre 2002-09-20 klockan 00.30 skrev Fredrik Noring:
Does anybody know if XVideo is supposed to work with interlace
at all, or is this limited by the hardware?
After some research on a few TNT and GeFore cards, I think I can
answer this question myself.
It seems that the hardware which handles
On Fri, 20 Sep 2002, Scott Long wrote:
I'm no Xpert on this, but it appears that someone forgot to put -fPIC
in one of the makefiles?
That would cause the _GLOBAL_OFFSET_TABLE linkage error...
The modules that get loaded are _not_ supposed to have -fPIC, though if it
were present, it might
Thanks for finding this problem. I have checked in the changes to
radeon_reg.h to add this register.
BTW, I only have x86 test machines, so I would be very interested to
hear if there are any other problems with this patch.
Thanks,
Kevin
On Fri, Sep 20, 2002 at 06:36:59AM -0700, Miles Lane
On Fri, Sep 20, 2002 at 01:09:31PM +0200, Alexander Stohr wrote:
As far as i have read on the list in a posting from hy0
there was a patch against XFree86 development branch that
made it into the CVS. This might add support new ATI chipsets.
Hui's patch does add support for new ATI chips,
19 matches
Mail list logo
