well, Get GContext from GC is very easy. But I only got
GContext and need GC information to do something, such as get a line's width
from GC.
How Can I get GC information only in client side? I
meannot searching in Server side
Hi,
after following this list for a couple of weeks I have gotten nowhere
trying to acheive decent acceleration for my ATI Radeon QL (8500
128mb), and it doesn't seem many others have, either.
This is Status Quo:
* The resident XF86 'ati' driver works, gives a display etc (I have a
perfectly
Title: AW: [Xpert]Status of ATI Radeon support under XFree86
Kacper,
your board has to be 'build by ATI', for the firegl drivers to work.
Johannes
-Ursprüngliche Nachricht-
Von: Kacper Wysocki [mailto:[EMAIL PROTECTED]]
Gesendet: Freitag, 11. Oktober 2002 11:00
An: [EMAIL
On Fri, Oct 11, 2002 at 02:58:24AM +0200, Michel Dänzer wrote:
And do you happen to remember at which revision you changed the
radeon driver, so I could have something as a template so I can
see what I have to change?
Not off the top of my head; I could look it up, but it might be
Hello,
I've recently installed an elotouch screen on debian linux woody with X server 4.1.0
and it work properly but when I
calibrate eloscreen (with java EloVa or java CPL) , It doesn't save the configuration
into XFree86Config-4 so when I boot
the system, I must recalibrate eloscreen ...
Michel Dänzer wrote:
On Fre, 2002-10-11 at 04:31, Geoffrey wrote:
snip
(--) PCI: (0:11:0) ATI Mach64 GP rev 92, Mem @ 0xd500/24, 0xd300/12, I/O @
0xa800/8, BIOS @ 0xd4fe/17
snip
It's a Mach64...
Section Device
Identifier device2
VendorName ATI
BoardName
Hi there.
I'm running Xfree86-4.2.0 on FreeBSD-4.7-STABLE.
My monitor is Sun GDM-20E20. I had ATi RagePro in this box, today I
plugged in a Matrox G450 F.
The picture is much worse than what I could get from the ATi card.
Bright text on dark background is quite fine, but dark text on bright
Title: RE: [Xpert]rage pro (16mb) symbol errors
Option DPMS
BusID PCI:0:11:0
EndSection
Section Device
Identifier device1
VendorName ATI
BoardName ATI Radeon
Driver radeon
Option DPMS
Option AGPMode 2
BusID AGP:1:0:0
^
Not sure this works either, but it
On Thu, 10 Oct 2002, David Dawes wrote:
On Fri, Aug 23, 2002 at 07:10:08PM +0200, Alexander Stohr wrote:
I understand your point.
I would like to have the administrator to have a set of known good
resolutions and setups between the user can select its desires.
It's already possible to put
On Thu, 10 Oct 2002, Geoffrey wrote:
I've been trying to get my dual head radeon ve working, gave up and
stuck another card in this box, rage pro (16mb). It appears from the
log that both are recognized, but then I get:
Symbol fbdevHWGetLineLength from module
On Tue, 8 Oct 2002, Patrick Mau wrote:
Hallo List,
this is my first post, so if you need further information let me know.
I compiled X from CVS and everything is working well, but the fonts
look condensed; the characters are too tall. I usually use the
-dpi 100 option when starting X.
# [EMAIL PROTECTED] / 2002-10-11 17:21:09 +0200:
Hi there.
I'm running Xfree86-4.2.0 on FreeBSD-4.7-STABLE.
My monitor is Sun GDM-20E20. I had ATi RagePro in this box, today I
plugged in a Matrox G450 F.
The picture is much worse than what I could get from the ATi card.
Bright text on
Marc Aurele La France wrote:
On Thu, 10 Oct 2002, Geoffrey wrote:
I've been trying to get my dual head radeon ve working, gave up and
stuck another card in this box, rage pro (16mb). It appears from the
log that both are recognized, but then I get:
Symbol fbdevHWGetLineLength from
On 10 Oct 2002, Michel [ISO-8859-1] Dänzer wrote:
If it's a Mach64 card, Option CompositeSync off might help.
This fixes the problem. No more flickers! -)
Thanks you,
Jeff.
___
Xpert mailing list
[EMAIL PROTECTED]
Dear Sirs,
we bought a compaq EVO 510 which has an integrated video card FW82845G.
I try to setup a Linux RedHat 7.1 on it but we still have problems on
the X Configuration. I couldn't find information about the linux driver
to use. Could you help us to fix this?
Thanks in advance,
Xavi
--
Hi,
I have problem in running three screens in X window with separate
session
managers. Your advices will be greatly appreciated.
I am able to run two screens with Matrox G550 with separate session
managers without any problems. I can also run the three screen
configuration
in xinerama mode,
From: Roman Neuhauser [EMAIL PROTECTED]
Sender: [EMAIL PROTECTED]
Date: Fri, 11 Oct 2002 18:46:46 +0200
# [EMAIL PROTECTED] / 2002-10-11 17:21:09 +0200:
Hi there.
I'm running Xfree86-4.2.0 on FreeBSD-4.7-STABLE.
My monitor is Sun GDM-20E20. I had ATi RagePro in this box, today I
Title: RE: [Xpert]Drivers for Compaq
You are most likely using a laptop that has an
intel 845G
integrated grafics and hostbridge chipset.
I must assume that this chipset was not at all
supported by XFree86 when RedHat 7.1 was burnt to Gold-Release.
Meanwhile there was a RH 7.2, 7.3 and
Branden Robinson wrote:
Sending redundant messages to the list is not the best way to get your
questions answered.
Ok I'll take to mind in future. Sorry for this.
Your question also was not terribly germane to the charter of the
Xpert list.
Why? I've only asked if someone knows if the
Marc Aurele La France wrote:
On Thu, 10 Oct 2002, Geoffrey wrote:
I've been trying to get my dual head radeon ve working, gave up and
stuck another card in this box, rage pro (16mb). It appears from the
log that both are recognized, but then I get:
Symbol fbdevHWGetLineLength from
Marc Aurele La France wrote:
On Thu, 10 Oct 2002, Geoffrey wrote:
I've been trying to get my dual head radeon ve working, gave up and
stuck another card in this box, rage pro (16mb). It appears from the
log that both are recognized, but then I get:
Symbol fbdevHWGetLineLength from
On Fri, 11 Oct 2002, Geoffrey wrote:
Try removing the BusID from the Rage Pro's device section.
Well, I stuck the rage card into another box, used XFree86 -configure
and the card works fine. the BusID entry was added to the config as
well, inspite of the fact it's a single card in the
On Fri, 11 Oct 2002, Martin Ding wrote:
I met a problem about one extension, which contains server side and
client side. I just doubt the extension has some problem. But reading
source code make me sick and faid to find anything I need.
So, Is there any way to debug the extension? For
Marc Aurele La France wrote:
On Fri, 11 Oct 2002, Geoffrey wrote:
Try removing the BusID from the Rage Pro's device section.
Well, I stuck the rage card into another box, used XFree86 -configure
and the card works fine. the BusID entry was added to the config as
well, inspite of the fact
Hi there,
I've spent the last two days trying to get X to run on my new Dell C400 laptop
w/ FreeBSD. I was successful in getting X to start in 1024x768x8, but not
higher. I've read that others have been able to get 1024x768x24, and I hope
someone on this list might be able to help me out.
My
On Fri, 11 Oct 2002, Martin Ding wrote:
How Can I get GC information only in client side? I mean not searching
in Server side
In theory the client GC is an opaque handle and you're not
supposed to be able to get any info from it on the client side.
However, Xlib does cache all of these
Hi,
I have a R505 Vaio laptop with a i830 chipset and am trying to have X display
on an external screen as well as on my LCD panel.
Right now I managed to have the display on both if the external monitor is
plugged when I boot (this is actually automatic) but my external display
frequency is
Title: AW: [Xpert]Status of ATI Radeon support under XFree86
after
doing some research on ATI.com, anandtech.com and others to make
sure...
ATI
Radeon 8500 is built with a chip from the Radeon R200 chip family
and
should work with the available ATI FireGL drivers.
But
ATI Radeon VE
Michael Stephen Hanni writes:
G'day Egbert,
The funny thing is that using either cursor I get this behavior. I'll look
into this, maybe I did something that made the hardware cursor be used
regardless of the option setting.
Hmm, that's funny. It is possible that the cursor Image
On Fre, 2002-10-11 at 04:31, Geoffrey wrote:
Michel Dänzer wrote:
On Don, 2002-10-10 at 03:58, Geoffrey wrote:
I've been trying to get my dual head radeon ve working, gave up and
stuck another card in this box, rage pro (16mb). It appears from the
log that both are recognized, but
On Thu, 10 Oct 2002, Bill Schoolcraft wrote:
Hello Family,
In configuring a FreeBSD-4.6.2 box I ran X -configure and got a file
that worked but the resolution was a bit too high for me and when I
viewed the XF86Config file I saw in the Display line:
#DisplaySize 300 230 # mm
And the
Yes, I have already thought to this solution
But I need to display at least 30 frame per seconds in a image format of 640x512
without overloading the CPU.
My idea consists to write the data in the video driver like V4L and then
display the data in the overlay of the graphic card.
I suppose that I
Hi Martin!
Have you find any problem with XTest? I haven't, allthough I have found
some mysterious behaviour in RECORD extension*.
The way I tried to track down that bug** was simply adding a few
printout (to file) statements in the server part of RECORD extension to
make sure that the struct I
HI!
Martin and I have been talking about a problem in RECORD. I don't know
wether the refered problem is that problem or not, but I figure it is.
...However, there seems to be a problem with RECORD wether refered to by
Martin or not.
When using RECORD to record either some delivered event or
Marc Aurele La France wrote:
That's a hang. The box is not responding to anything. I'd like to see
what's left of /var/log/XFree86.0.log after the reboot that's needed to
get it out of that state.
Okay, you ready for this. No file, none, not even a null file. What do
you make of that? I
Hello Xpert list
I realize this is not really a XF86 question but do you
of any graphics cards with vertical refresh frequencies
greater than 100/sec. Also what monitors or projectors
exist to support high refresh rates.
Thanks,
Daniel
___
Xpert
I've just checked in the latest patch from ATI. Here's the CHANGELOG
entry:
390. Rewrite Radeon DDC/DFP mode detection and management (Kevin Martin).
389. Integrate ATI patch:
- Add 2D support for Radeon 9000 (RV250), Mobility M9 (RV250 mobile)
and Radeon 9700 (R300)
-
37 matches
Mail list logo
