Re: [Xpert]NumLock

Thank you... That did the trick... :-) ~Jrn On Tue, 2002-11-26 at 00:51, dave crane wrote: try numlockx http://dforce.sh.cvut.cz/~seli/en/numlockx dave ___ Xpert mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xpert --

Re: [Xpert]wierd xterm bug

Hi Not that I did understand so much of the last part of the message, I sometimes got a similar bug! Don't know why it happens, but sometimes when I have been pressing CTRL, the systems misses the event when I released it again and the result is that the mouse continues to select text instead

[Xpert]NumLock

Hi How do I make X start up with NumLock on? ~Jrn Christensen -- Jrn Christensen [EMAIL PROTECTED]

Re: [Xpert]NumLock

Hi setleds only works from a tty - not an xterm! I have manage sometime to get the NumLock turned on as default for all ttys and vtys - don't ask me how! But when I start X, it automaticaly disables the NumLock on that vty. I tried to bypass that with the setleds command in my windowmaker

Re: [Xpert]Multiple copies of screen left to right with S3 Trio3donXFree86 4.2.0

Hi... I have the same problem with the same card See the thread started by me on nov. 5 [S3 Trio 3D] Well the end of my story was, that I was able to punh my video card up to 1280x960 using the VESA driver, but i had awfull slow refresh rates (eyes hurt) - And I could not change

Re: [Xpert]S3 Trio 3d

Just tried that... same result... (Asumed that Horisync was in khz and VertRefresh was in hz) ~Jørn Christensen On Sat, 2002-11-09 at 13:39, Kevin Brosius wrote: No, I don't believe the Trio3d hardware supports anything above 24 bit color. The chipset supports a 32 bit wide mode

Re: [Xpert]S3 Trio 3d

With s3virge... Went back from vesa to virge because the modelines did not seem to have any effect on the vesa driver and even though I wanted a higher resolution, I would not suffer the low refresh rate that the vesa gave me! ~Jørn Christensen On Sat, 2002-11-09 at 16:46, Kevin Brosius wrote

Re: [Xpert]X Seesion Can run only one time

Well on my system the log is {£HOME}/.X.err - but not very verbose... To get a full log try X -verbose logfile ~Jørn Christensen On Fri, 2002-11-08 at 06:43, bc2002 wrote: it is great to come accross some thai lady using linux. i don't know if you got your problem solved. i know

Re: [Xpert]S3 Trio 3d

x 768 and the only difference was where on the screen the picture was placed... (oh well and the refresh rate...) but I thought it had no effect on the driver generating the picture...!?!?!? ~Jørn Christensen On Thu, 2002-11-07 at 00:53, Kevin Brosius wrote: Well, don't know any other reason

Re: [Xpert]S3 Trio 3d

Hi Just tried the vesa driver... I got it up to 1152 x 864 x 16. Alas... could not get 24 bpp and there's no accel. So till.. let me know if you get the s3virge to work properly... ~Jørn Christensen (BTW... where can I find some modelines to my monitor... The refreshrate is really annoying low

[Xpert]xdm/kdm problems

: cannot connect to X server :0 What is wrong? ~Jørn Christensen ___ Xpert mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xpert

Re: [Xpert]S3 Trio 3d

Yes... tried that (alogn with XVideo 0)... didn't work... Attached the log and the config file... ~Jørn On Tue, 2002-11-05 at 12:36, Kevin Brosius wrote: Jørn Christensen wrote: Hi I have a Trio 3d vidoe card (4mb) and really really want to get a higher resolution than 1024x768

[Xpert]S3 Trio 3d

very frustrating on a 17... ~Jørn Christensen XFree86 Version 4.2.1 / X Window System (protocol Version 11, revision 0, vendor release 6600) Release Date: 3 September 2002 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version

[Xpert][Fwd: S3 Trio 3d]

Ooops... forgot one file... -Forwarded Message- From: Jørn Christensen [EMAIL PROTECTED] To: [EMAIL PROTECTED] Subject: S3 Trio 3d Date: 05 Nov 2002 08:52:44 +0100 Hi I have a Trio 3d vidoe card (4mb) and really really want to get a higher resolution than 1024x768. I've just