--
Baojian Zheng
Institute of Computing Technology
Chinese Academy of Sciences
P.O. Box 2704-25
Beijing, China,100080
Tel: 86-10-62565533 ex. 9311
E-mail: [EMAIL PROTECTED]
---BeginMessage---
Jeffrey H. Ingber wrote:
The -bpp switch will only have an effect if the cooresponding color
Zheng BaoJian wrote:
Jeffrey H. Ingber wrote:
The -bpp switch will only have an effect if the cooresponding color
depths are defined in the XF86Config-4 file. So, if you want to switch
between 8 and 24bpp by invoking X as such: (X ... -bpp 8/24), you'll
need both color depths defined
how can i enable numeric keypad automatically when
entering x? 'xset led 3' like things wasn't work.
__
Do You Yahoo!?
Send your FREE holiday greetings online!
http://greetings.yahoo.com
___
Xpert mailing
dueze a écrit :
The fonts are awful and bigs and the screen seems to be virtual (but I
cannot move it) !
OK, here is the solution : after launching X, press the Fn and F7
keys at the same time. The Thinkpad display goes black, then comes back
with the good fonts.
The only problem is that the
Hi there.
Has anyboby managed to get Xfree4.1.0-3 (which comes
with Rh7.2) running on a CyberBlade XP?
I've just updated my Toshiba 4600 to RH7.2 but didn't
manage to get the graphics card to work properly.
Any suggestions?
Thanks in advance
Luis Tavora
There's a small utility called numlockx which does what you want. I
don't have the URL handy, but a quick search on freshmeat.net should
turn it up.
On Sat, Dec 29, 2001 at 07:44:41AM -0800, levent wrote:
how can i enable numeric keypad automatically when
entering x? 'xset led 3' like things
hi Group,
can someone help me with the Xv extions?
im using Xfree86 4.1.0.1
and kernel 2.4.16
xvinfo tells me
X-Video Extension version 2.2
screen #0
no adaptors present
my XF86config-4 is
Section Device
Identifier Nvidia r128
Driver nv
#Driver
I'm damn close, but its not working yet.
XFree86 -configure works, and spits out a complete configuration file.
Unfortunately, however, X still doesn't start. It looks like it's about
to, but then it quits:
(II) SUNCG14: driver for CG14
(==) SUNCG14(0): RGB weight 10
(==) SUNCG14(0):
On Sat, 29 Dec 2001, dogshu wrote:
(II) SUNCG14: driver for CG14
(==) SUNCG14(0): RGB weight 10
(==) SUNCG14(0): Default visual is TrueColor
(==) SUNCG14(0): Using gamma correction (1.0, 1.0, 1.0)
(II) Loading /usr/local/XFree86-cvs/lib/modules/libfb.a
(II) Module fb: vendor=The
Thanks for your help, I tried out your XF86Config file (it was already
very similar to my own), but it did not work. I am presently compiling
XFree86 4.1.0, hopefully it will work with that version.
couple questions:
What version of Solaris are you running?
Did you have to make any changes
Hi all,
Until various Brave Souls port the Linux NVIDIA binary driver to
FreeBSD, I'm stuck with XFree's vesa driver, which will only let me run
at 1280x1024x16 (whereas I'd like 1600x1024x24). At any rate, it's
horribly slow, blah blah, but other than that it appears to work
perfectly:
On Thu, 27 Dec 2001 [EMAIL PROTECTED] wrote:
Dear Sirs,
I am trying to understand the implimemtation of Pseudocolors.
I am told that the Matrox G400 supports one psuedocolor, two 24 bit
truecolor and one monochrome visuals.
There is only one hardware palette. Matrox cards and some
On Thu, 25 Dec 2003, Thomas Braun wrote:
hi Group,
can someone help me with the Xv extions?
The Riva128 does not support Xv.
Mark.
im using Xfree86 4.1.0.1
and kernel 2.4.16
xvinfo tells me
X-Video Extension version 2.2
screen #0
no adaptors
Alex,
Thanks for the information, and if this makes my rants in my response to
[EMAIL PROTECTED] incorrect or irrelevant, my apologies.
As a piece of information, what operating system do you use? The
particular problem under discussion arose under Solaris 8, and xfree86
4.1.0 shouldn't run at
Hi there,
I thgt i should also add some observations from my end regarding the DRI and
AGP issue. I was atlast able to get my Radeon driver support for my Laptop.
Compaq Presario 1720 US, with RH 7.2, Kernel 2.4.7-10, XFree86 CVS Oct 31st
8 MB Video Ram, ATI Radeon Mobility M6
Observations:
The following url might help: http://gatos.sourceforge.net/dri-debug.php
Vladimir Dergachev
On Sat, 29 Dec 2001, Prabhakar Reddy GVS wrote:
Hi there,
I thgt i should also add some observations from my end regarding the DRI and
AGP issue. I was atlast able to
Hi all,
Had problems getting a Radeon 7000
working, as the XFree86.#.log indicated all
was well, but the screen always blanked.
Traced it down to radeon_driver.c,
which was assuming DVI instead of CRT -- the
card only has one 15-pin VGA connector, but
otherwise, it's pretty much
Hi All
I am chasing a running config for a toshiba 300cds. This model runs the
CT 6 chipset on a DSTN (passive) screen only capable of
800x600...has anyone got one? I am running 4.1.0, and thus far have not
been able to get X not to core dump with a signal 10.
Thanks
David Hunt
Hi all,
Forgot to mention,
Option CrtScreen True
didn't work, the messages said it was ignoring
it and still tried to use DVI, which is why I
was wondering about fixing the radeon driver.
-- DN
Daniel
___
Xpert mailing list
[EMAIL PROTECTED]
19 matches
Mail list logo