hi,
i've set up 2vga cards (both drivers included in x4.1) and now when i start the gdm,
the xserver starts on both monitors,but the left monitor shows the screen splittet
horizontal into a white and a black section, and the right monitor shows the
gdm-login.But the gdm isn't graphically right,
Has anyone experience on how to make PCI cards based on Alliance AT3D
work with Xinerama?
My system has an AGP RIVA 128ZX which has been functioning properly so
far as the unique video card. I tried to add two different AT3D-based
cards, a Colormax and a ViewTop, but to no avail. Starting X
Hy0,
I accidently deleted your address, so this email is mainly directed
at you.
I just wanted to say I got everything working -- but it wasn't my
crooked installation of X that was giving problems.
After a clean install of X (the current CVS, 4.2.99.2) I was still
having the same problem
Just for the record, combining the current CVS, with an experimental
driver, got things working, almost. So, it is possible to do dual
head with -this- oem card, one more experienced than me could answer
if that meant -all- oem cards.
-Adam
On Fri, Nov 01, 2002 at 11:01:40PM -0800, hy0 wrote:
On Thu, Oct 31, 2002 at 03:22:27PM -0600, Adam Luter wrote:
Attached are my XF86Config-4 and XFree86.0.log files. I believe I
have correctly setup my XF86Config-4 file, however my second monitor
does not receive any signal.
This time I promise not to forget to attach the files! Sorry :)
On Fre, 2002-11-01 at 16:02, Adam Luter wrote:
On Thu, Oct 31, 2002 at 03:22:27PM -0600, Adam Luter wrote:
Attached are my XF86Config-4 and XFree86.0.log files. I believe I
have correctly setup my XF86Config-4 file, however my second monitor
does not receive any signal.
This time I
Normally I wouldn't mind compiling, but I think it's understandable
for X if I'm a little trepidious :) .
However, I am anxious enough to do so this weekend or the next, if
there aren't any other less adventourus suggestions! :)
Thank you for the advice -- I'm sorry that I didn't find that
The problem is caused by one of your monitor not being detected. If both of
your monitors were connected during boot time (if not, try it), this is
probably another instance of the monitor detection problem with some OEM
cards (the card id reported by your log file indicates you have an OEM
card).
Attached are my XF86Config-4 and XFree86.0.log files. I believe I
have correctly setup my XF86Config-4 file, however my second monitor
does not receive any signal.
I have tried disabling various modules, I have tried swapping monitors
and also I have tried various options (such as the
Under Xinerama, I (and a number of other people) am experiencing Mozilla
hangs in XFree86 on pages with international characters:
#0 0x4058b17e in __select () from /lib/libc.so.6
#1 0x404be34c in _XlcPublicMethods () from /usr/X11R6/lib/libX11.so.6
#2 0x4041259a in _XRead () from
Le mar 10/09/2002 à 09:39, Chris Hubick a écrit :
Under Xinerama, I (and a number of other people) am experiencing Mozilla
hangs in XFree86 on pages with international characters:
#0 0x4058b17e in __select () from /lib/libc.so.6
#1 0x404be34c in _XlcPublicMethods () from
Mark
Thanks for your answer, neverthless I have other
doubts:
Let us retake the previous scene, xinerama with
two screens D1 and D2.
All rendering requests are duplicated and sent to
both screens
all the time. If the window is not visible, rendering
simply
clipped away as it
On Wed, 9 Oct 2002, Verduzco Jesus Alberto wrote:
Mark
Thanks for your answer, neverthless I have other
doubts:
Let us retake the previous scene, xinerama with
two screens D1 and D2.
All rendering requests are duplicated and sent to
both screens
all the time. If the
Hello
I am interested in the operation of xinerama
Let us suppose the following, xinerama with two
monitor D1 and D2.
That it happens?
* When a xterm window is created and it only is
showed on D1?
* the xterm window will be created only on D1 ?
Later time the xterm
On Tue, 8 Oct 2002, Verduzco Jesus Alberto wrote:
Hello
I am interested in the operation of xinerama
Let us suppose the following, xinerama with two
monitor D1 and D2.
That it happens?
* When a xterm window is created and it only is
showed on D1?
When a
I've sent this several times to the list before I became a member, but
it never showed up, I guess the moderators didn't accept it.
I have a retail AGP ATI Radeon VE, the kind that has the 3 connectors
onboard (DVI, VGA, and SVideo). I want to set it up as a dualhead
system, with a digital LCD
Hey
I'm trying to get Xinerama working with KDE 3.0.2
which is installed on a Debian Unstable with apt but I'm having some problems. I
have two graphic cards, S3 Virge and Innovision Geforce3 and when running
without Xinerama both monitors connected to these cards works. I get a seperate
Hey
I'm trying to get Xinerama working with KDE 3.0.3
which is installed on a Debian Unstable with apt but I'm having some problems. I
have two graphic cards, S3 Virge and Innovision Geforce3 and when running
without Xinerama both monitors connected to these cards works. I get a seperate
On Mon, 30 Sep 2002, Verduzco Jesus Alberto wrote:
Hello
I am new for xinerama nevertheless I have curiosity
in his operation.
In the documentation of xinerama it is possible to
be read A region XineramaScreenRegions[i] is
initialized
for each physical screen, and single
I've got the same card, the best I ever got was duplicate images on the
DVI and VGA outputs. The resolution proposed to me was to build X from
cvs, which I've been working at, but not complete at this time.
If you get a better answer then that I'd appreciate it if you'd share it
with me.
Hello,
I've installed a second screen on my computer, the pci graphic card is a
permedia 2. My other screen is coupled with a radeon on agp. I've patched
windowmaker 0.80.1 to have xinerama support. I've modified my startx
script and it work well but after some times(5 min or less), the display
On ma, 2002-06-10 at 22:44, Xavier Bestel wrote:
I had similar problems (VERY annoying) and managed to work around them
by disabling the xfs font server. Since then it works quite well.
Thanks! That fixed it!
Best regards,
Matti Airas
___
Xpert
Le lun 10/06/2002 à 12:16, Matti Airas a écrit :
Hi,
After struggling with ATI Radeon 7500 multihead setup, I purchased a
second-hand Tseng Labs ET6000 to run the second head. All works fine and
dandy (after I found the PCI/AGP preference setting in my BIOS), but for
some reason Gnome
Mark Vojkovich wrote:
On Thu, 6 Jun 2002, Jens Owen wrote:
Mark Vojkovich wrote:
On 6 Jun 2002, Juliusz Chroboczek wrote:
Congratulations.
To what extent is the version of Xinerama that X.Org are proposing
compatible with the XFree86 one?
It's a different
I'm really at the end of my rope here. Since 4.1 came out i have had to
revert on every release back to 4.0.3. I think I finally have come to a
conclusion its not 'cuz I'm a _complete_ dumbass.
overall setup:
tyan thunder K7 2x1.2mp 768ram
agp: matrox g450
pci cards tried:
tnt2 m64, tnt2
Congratulations.
To what extent is the version of Xinerama that X.Org are proposing
compatible with the XFree86 one?
Juliusz
___
Xpert mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xpert
On Thu, 6 Jun 2002, Jens Owen wrote:
Mark Vojkovich wrote:
On 6 Jun 2002, Juliusz Chroboczek wrote:
Congratulations.
To what extent is the version of Xinerama that X.Org are proposing
compatible with the XFree86 one?
It's a different API and the protocol is not
I'm really at the end of my rope here. Since 4.1 came out i have had to
revert on every release back to 4.0.3. I think I finally have come to a
conclusion its not 'cuz I'm a _complete_ dumbass.
overall setup:
tyan thunder K7 2x1.2mp 768ram
agp: matrox g450
pci cards tried:
tnt2 m64, tnt2
You'll want to be running 4.2 (we don't support older servers).
Which card is the primary? ie, which one does the console come up
on?
Mark.
On Thu, 6 Jun 2002, dave crane wrote:
I'm really at the end of my rope here. Since 4.1 came out i have had to
revert on
i really do want to run 4.2... i have both versions on an otherwise
identical distro on seperate partitions.
the primary is the g450 agp, but i've tried both being the primary (as
set in bios) to no avail.
thanks
dave
Mark Vojkovich wrote:
You'll want to be running 4.2 (we don't support
Public Review
of the Draft Standard
of the Xinerama Extension
to the X Window System,
sponsored by X.Org.
After its initial release, as part of X11R6.4, the Xinerama Extension
API and code base splintered as
I have narrowed a bit the bug:
here is a small testcase which very often freezes, but only when in
Xinerama mode and when using a truetype font:
#include stdio.h
#include stdlib.h
#include unistd.h
#include X11/Xlib.h
int main(int argc, char **argv)
{
int i;
GC gc;
i,
I've got problems with some apps using gtk+1.2. They often freeze when
in Xinerama mode.
My setup is:
Linux 2.4.19-pre7-ac2 (SMP)
Debian/sid
XFree86 4.1.0
gtk+1.2
Xinerama mode on 2 different sized screens, one on an ATI R128 and the
other on a S3 Virge.
I've seen Evolution freeze *very*
Xavier Bestel [EMAIL PROTECTED] writes:
I've got problems with some apps using gtk+1.2. They often freeze when
in Xinerama mode.
My setup is:
Linux 2.4.19-pre7-ac2 (SMP)
Debian/sid
XFree86 4.1.0
gtk+1.2
Xinerama mode on 2 different sized screens, one on an ATI R128 and the
other on a
Le ven 10/05/2002 à 18:07, Xavier Bestel a écrit :
Le ven 10/05/2002 à 16:16, Owen Taylor a écrit :
The first step would be to try to get a backtrace while running the
programs with the --sync command line option, since it's possible
that it's not the XQueryPointer that is causing the hang
What I would suggest is that you grab xmon from:
ftp://ftp.x.org/contrib/devel_tools/xmon.1.5.6.tar.gz
(Or, I think Debian might have a package of it.)
And run the app under it:
xhost + [ I've generally had to do this, standard cautions apply ]
xmonui | xmond /tmp/log
Le ven 10/05/2002 à 20:55, Owen Taylor a écrit :
What I would suggest is that you grab xmon from:
ftp://ftp.x.org/contrib/devel_tools/xmon.1.5.6.tar.gz
(Or, I think Debian might have a package of it.)
And run the app under it:
xhost + [ I've generally had to do this,
-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf
Of Mark Vojkovich
Sent: Thursday, May 02, 2002 4:08 AM
To: Eric Liedtke
Cc: [EMAIL PROTECTED]
Subject: Re: [Xpert]Xinerama and Mouse Clicks
On Wed, 1 May 2002, Eric Liedtke wrote:
Problem 1)
When I would log into a Sun
I've been using XFree86 for a while and it's done well enough that I've
never
mucked around with the actual details of what was going on other than
tweaking
my config file. I've run into a couple of problems I just wanted to run
by all you
folks for suggestions.
Here's the setup:
I am
On Wed, 1 May 2002, Eric Liedtke wrote:
Problem 1)
When I would log into a Sun box export DISPLAY to my box and run HP
openview's network presenter app(ovw). I had problems with sections
of
the map just not being drawn. If I grabbed one of the icons in the
window
and
Hello!
I have a problem to setup Xinerama with two matrox pci-graphic-cards
(one with 4 MB Graphics Memory and one with 2). When I start X with
the Xinerama-Option commented out, everything starts fine (I have my
windowmanager on the big screen and a grey second screen). But when I
use Xinerama,
Hello!
I have a problem to setup Xinerama with two matrox pci-graphic-cards
(one with 4 MB Graphics Memory and one with 2). When I start X with
the Xinerama-Option commented out, everything starts fine (I have my
windowmanager on the big screen and a grey second screen). But when I
use Xinerama,
Hi!
I'm trying to run xinerama and at the same time load extmod. If I load
extmod it does not work (which means I can't use sawfish since it's using
the shape extention). If I don't load extmod xinerama works.
I also tried doing what it says in xinerama-HOWTO, but that does not work
either.
X
On Sat, 13 Apr 2002, Andreas Winge wrote:
Hi!
I'm trying to run xinerama and at the same time load extmod. If I load
extmod it does not work (which means I can't use sawfish since it's using
the shape extention). If I don't load extmod xinerama works.
This was a bug in the Xv extension
MV Xinerama is merely an extension that makes two X screens look like
MV one.
Merely?
Juliusz
___
Xpert mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xpert
On 10 Apr 2002, Juliusz Chroboczek wrote:
MV Xinerama is merely an extension that makes two X screens look like
MV one.
Merely?
OK, a very large intrusive extension with many thousands of lines of
code that merely makes multiple X screens look like one.
There do seem to be some
On Sun, 7 Apr 2002, Per Edin wrote:
Hello,
I have two graphics card in my computer and two screen's and i wanna use them
to make a dual-head system but i don't' know how to get it to work in linux.
I think I should use Xinerama to use two screen's under Linux but how shall i
setup
I've searched Google groups and various mailing lists and I've found
several people with the same problem as me, but no solutions to this.
I'm running XF86 4.1.0.1 on several Debian Woody xinerama 2 monitor
boxes (with several different combinations of video cards) and I can't
find a way to post
This was broken when we added the new software rendering code.
It should work fine in 4.2.
Mark.
On Wed, 3 Apr 2002, Matthew H. Ray wrote:
I've searched Google groups and various mailing lists and I've found
several people with the same problem as me, but
Currently I have xinerama working properly, but I'm getting a weird
effect on one monitor controlled by a ATI Radeon 32MB SDR pci card. The
mouse pointer has a right trailing set of vertical dots, that disappear
on the other monitor. Anyone have any ideas?
I'm running XFree86-4.2.0 and linux
On Fri, 29 Mar 2002, Webillo Disperso wrote:
Hi.
I never got Xinerama working completely. First failure is mouse cursor on second
monitor:
-Executing simply 'X', cursor appears on first monitor but not on second.
-On KDE, cursor doesn't appear either on second monitor. Guessing its
Hi.
I never got Xinerama working completely. First failure is mouse cursor on second
monitor:
-Executing simply 'X', cursor appears on first monitor but not on second.
-On KDE, cursor doesn't appear either on second monitor. Guessing its position, if I
drag it (left button) a big black square
Here's some more information about the freezing with 100% CPU use bug
that I sent to the list not-too-long ago. This heppens whenever I log
out of gnome, and in particular seems to happen when the
gnome-name-server dies. The problem, however, is not isolated to Gnome
because I have had other
On Tuesday, March 19, 2002, at 06:33 PM, Mark Vojkovich wrote:
On Tue, 19 Mar 2002, Josh Hogan wrote:
Hello. I've recently been trying to get the Xinerama extensions with
XFree86 4.1.0 (stock from Redhat 7.2 install, no updates) working. My
computer is a P2 233, with two video cards:
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf
Of Josh Hogan
Sent: Tuesday, March 19, 2002 7:25 PM
To: [EMAIL PROTECTED]
Subject: [Xpert]Xinerama Problem with XFree86 4.1.0
Hello. I've recently been trying to get the Xinerama extensions
On Wednesday, March 20, 2002, at 09:23 AM, Randall Watt wrote:
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf
Of Josh Hogan
Sent: Tuesday, March 19, 2002 7:25 PM
To: [EMAIL PROTECTED]
Subject: [Xpert]Xinerama Problem with XFree86 4.1.0
Hello
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf
Of Josh Hogan
Sent: Wednesday, March 20, 2002 10:54 AM
To: [EMAIL PROTECTED]
Subject: Re: [Xpert]Xinerama Problem with XFree86 4.1.0
On Wednesday, March 20, 2002, at 09:23 AM, Randall Watt wrote
On Wednesday, March 20, 2002, at 10:46 AM, Randall Watt wrote:
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf
Of Josh Hogan
Sent: Wednesday, March 20, 2002 10:54 AM
To: [EMAIL PROTECTED]
Subject: Re: [Xpert]Xinerama Problem with XFree86 4.1.0
I have found that the cause of this problem is due to the resourceid in the
error event received by the window manager does not match the root window id
which results in mwm ignoring the error. I have found that if I change
PanoramiXChangeWindowAttributes to iterate over screens in the forward
On Tue, 19 Feb 2002, Darren Marshall wrote:
I have found that the cause of this problem is due to the resourceid in the
error event received by the window manager does not match the root window id
which results in mwm ignoring the error. I have found that if I change
When a window manager starts up and tries to gain control using
XChangeWindowAttributes on the root window it normally receives a BadAccess
error if another window manager is already running. However this doesn't
appear to work with xinerama. I have been attempting to debug the problem but
my
On Fri, 15 Feb 2002, Darren Marshall wrote:
When a window manager starts up and tries to gain control using
XChangeWindowAttributes on the root window it normally receives a BadAccess
error if another window manager is already running. However this doesn't
appear to work with xinerama. I
Hi,
I startet using Xinerama with KDE some time ago and it works fine, up to the fact that
it displays True Type fonts twice as wide as they should be. I have searched for other
people having this problem and found a few but no solution. Is there a solution?
The problem is that my virtual
Hi,
I startet using Xinerama with KDE some time ago andxit works fine. I have problems
displaying True Type Fonst though. They are twice as wide as they should be. I have
searched for other people having this problem and found a few but no solution. Is
there a solution?
The problem is that my
First of all, is there any documentation for Xinerama except
the Xinerama.h file?
From what I've seen there is no way to get the
physical size of the monitors that are used for the different
screens in Xinerama. Is this true? If so, will it
be fixed/added?
The normal X call only report the size
On Sun, 16 Dec 2001, Bj|rn Englund wrote:
Sat Dec 15 2001, Mark Vojkovich wrote:
On Sat, 15 Dec 2001, Bj|rn Englund wrote:
First of all, is there any documentation for Xinerama except
the Xinerama.h file?
Pretty much.
That is pretty much it?
So there are no plans to write
Sat Dec 15 2001, Mark Vojkovich wrote:
On Sat, 15 Dec 2001, Bj|rn Englund wrote:
First of all, is there any documentation for Xinerama except
the Xinerama.h file?
Pretty much.
That is pretty much it?
So there are no plans to write up a man page or so?
I didn't see any man page. I can
Sat Dec 15 2001, Mark Vojkovich wrote:
So, it's going to change at sometime when there's an official
API. XFree86 will be backwards compatible with the old
protocol but the sample implementation and all the commercial
vendors won't acknowledge the current protocol. You just have
to
Is the size of the screen actually useful? DPI seems more useful, but
even that doesn't make sense with XFree86's virtual desktops.
We just need the pixel aspect ratio to calculate correct scaling for
video or any digital image.
--
Billy Biggs
[EMAIL PROTECTED]
Sat Dec 15 2001, Mark Vojkovich wrote:
Is the size of the screen actually useful? DPI seems more
useful, but even that doesn't make sense with XFree86's virtual
desktops.
DPI or size is ok, easy to convert between if one has the resolution.
Important that one get separate DPI for X
On Sun, 16 Dec 2001, Bj|rn Englund wrote:
Sat Dec 15 2001, Mark Vojkovich wrote:
So, it's going to change at sometime when there's an official
API. XFree86 will be backwards compatible with the old
protocol but the sample implementation and all the commercial
vendors won't
On Sat, 15 Dec 2001, Bj|rn Englund wrote:
First of all, is there any documentation for Xinerama except
the Xinerama.h file?
Pretty much.
From what I've seen there is no way to get the
physical size of the monitors that are used for the different
screens in Xinerama. Is this true? If
On Fri, 7 Dec 2001, Mike Belangia wrote:
Sorry if this is the wrong place to ask about this, but I was sent here
from #xfree86 on openNet...Anyway, I just configured my x-server for
xinerama, and it only partialy works. The first monitor still performs
fine, but the second monitor only has
On Mon, 2001-11-19 at 13:17, Sprague, IT3 wrote:
Do DRI and Xinerama get along?
Not yet, except maybe with Matrox's binary drivers. Our 3dfx drivers
support DRI for traditional multihead, for everything else you can
probably only get DRI on one head.
--
Earthling Michel Dänzer (MrCooper)/
resources
(II) Screen 0 shares mem io resources
(II) Screen 1 shares mem io resources
- Forwarded message from David Lebel [EMAIL PROTECTED] -
From: David Lebel [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Subject: [Xpert]xinerama with Radeon Mobility M6 LY
Date: Thu, 8 Nov 2001 22:15:32 -0500
User
On Friday 09 November 2001 12:22, you wrote:
When I try to configure it with dual head, the screen on my external
monitor shows the starting moiree in a tinted greenish and it just
stops there, while the display on the LCD just flashes some kind of
content periodically. I can
I have a machine running XFree86 Version 4.1.0 with three displays --
a Matrox G400 (dual head card) and an ATI Rage IIC. I want to bind
the first display of the G400 and the ATI together with Xinerama and
leave the second display of the G400 as a separate screen so that I
can address windows to
On Wed, 3 Oct 2001, Brian J. Murrell wrote:
I have a machine running XFree86 Version 4.1.0 with three displays --
a Matrox G400 (dual head card) and an ATI Rage IIC. I want to bind
the first display of the G400 and the ATI together with Xinerama and
leave the second display of the G400 as a
Just a minor, but annoying, quibble with the Xinerama option, that
being images on the root window don't show up properly on the 2nd
head. I'm running at 3200x1200 resolution and tried using various
programs like xv, xpmroot, and the background options in several
window managers/desktop
79 matches
Mail list logo
