Hi,
3 more bugs are solved now which were not listed, but may have been
noticed by testers.
KDM 4.2.1 was not granting access to valid logins. This is solved in
the package : kde4base-workspace-4.2.1-17._yoper_alpha_ .
X did not work at all due to an outdated version of xkeyboard-config .
Hi,
The error in yaird is solved now.
A new slim iso is updated and does contain a new yaird as well as
kernel 2.6.29 . -
http://powerplant.yoper.com/pub/buildresults/iso/latest-slim.iso
Installation goes smooth. Further fine tuning with the repository
URL's etc. is required . The automatic pkg
Good Morning,
I've been extensively testing a large chunk of updates in order to
give Yoper the edge again that it used to have. The smart software
channel is here and can be found here :
[yoper-updates]
type = apt-rpm
baseurl = http://development.yoper.com/pub/buildresults/tmp/yoper-updates/
Hi,
yes, we still exist, although progress is a bit slow, currently.
The easiest way to get rid of a linux root password is the following:
1. Boot up using either an install or livecd (linux)
2. mount the respective harddrive/partition with the linux on e.g. /mnt
mount /dev/sda1 /mnt
3. mount
HI,
Can you tell me if Yoper still exists?
Is it still alive or abanded?
I was given an older laptop, Pentium ii,
which has Yoper on it. Can't access it though, as it has a root user password
on it. Nobody so far, has been able to tell me how to get rid of that so that I
can have a look at the
Dear Manager,
Hope you are doing great!
This is Becky Paul from CAT Technologies Ltd. If you have been considering
off-shoring or if you have any needs in the near future then we will enable you
of hiring retaining skilled professionals at unbelievable costs.
I would be glad if you
Hi,
We , the Yoper team are proud to announce the availability of Yoper
3.1 for public testing.
This release ships with Kernel 2.6.23, Xorg 7.3, KDE 3.5.9 as default
desktop and kde 4.0.3 available in the repositories as well. Further
default applications are Koffice 1.6.3, Firefox 2.0.0.14 and
, having no
mouse gives you very few possibilities to work comfortably.
Well, that's all for the moment being.
Best regards! ;-)
From: [EMAIL PROTECTED]
To: yoper-dev@lists.yoper.com
Date: Thu, 13 Mar 2008 18:29:42 +1300
Subject: Re: [yoper-dev] Yoper 3.0
Hi Carlos,
well, of course you're right wth that.. proven even about half a year ago,
when I tested to integrate upstart in yoper and got a boot time of 35/21 secs
(before/later). I agree with the first proposed change, but I don't like the
2nd one. Of course our standard desktop is kde, but
On Thursday 13 March 2008 05:12:47 Carlos López wrote:
I have also found the next two links that you might be interested in:
http://www.linuxforums.org/forum/yoper-linux-help/110774-i-got-yopered.html
http://cutecomputer.wordpress.com/2007/06/29/howto-yoper-30-a-smart-error-f
ixing/
Things
Hell.. of course not 13.03.08, but the 14.03.08.
Regards
___
yoper-dev mailing list
yoper-dev@lists.yoper.com
http://lists.frank-hosting.de/cgi-bin/mailman/listinfo/yoper-dev
I have also found the next two links that you might be interested in:
http://www.linuxforums.org/forum/yoper-linux-help/110774-i-got-yopered.html
http://cutecomputer.wordpress.com/2007/06/29/howto-yoper-30-a-smart-error-fixing/
Things said in the above links must be taken into consideration
Amazingly, I have found by chance the next link: http://www.yoper.org.pe/ :-D
_
La vida de los famosos al desnudo en MSN Entretenimiento
http://entretenimiento.es.msn.com/
___
yoper-dev
Hi,
I am happy to say that the Yoper 3.1 ISO's are functional again and
are even usable for installation. I am working on some first hot fixes
today and would recommend testers to have a go at it with the next ISO
( 2007-365) downloadable from
http://88.198.41.209/build/latest-slim.iso in approx
2007/10/11, Carlos López [EMAIL PROTECTED]:
Hi guys,
I have a nice bunch of packages ready to be moved to a stable branch. I
thought about sending them to 3.1/rocketfuel, but I've found out suddenly
that it's almost empty!! Therefore, my questions are:
Why don't we 'move' all packges from
Awesome news! I'll give it a spin as soon as I can.
Walter
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Tobias Gerschner
Sent: Tuesday, October 02, 2007 4:48 PM
To: Yoper Development List; [EMAIL PROTECTED]
Subject: [yoper-dev] Yoper 3.0.1 Titanium
PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Tobias Gerschner
Sent: Tuesday, October 02, 2007 4:48 PM
To: Yoper Development List; [EMAIL PROTECTED]
Subject: [yoper-dev] Yoper 3.0.1 Titanium Maintenance Release
Hi,
We're proud to announce the distribution release of yoper 3.0.1
Titanium
-dev@lists.yoper.com
Subject: Re: [yoper-dev] Yoper 3.0.1 Titanium Maintenance Release
Date: Wed, 03 Oct 2007 10:20:40 -0500
I did a fresh install of the reg iso and only found two problems very
small..
1. After install of the reg iso when logging out, there is a display
from the installer asking
Hi,
After several inquiries and discussions in IRC we decide to finally do
a 3.0 maintenance release.
The testing already begun and we are eager to get more feedback to
improve this release. More information can be find here :
hello
i downloaded yoper 3.0 single cd and live cd.
both cd show the grub manager and a short boot up of something. then a black
screen pops up and the computer freezes, no installation or similar happening.
wtf?
can you help me, i want to use yoper!
i attached a file which shows my system
Hi Helge,
This might be a video issue for the command line mode. Please try the
failsafe mode using the latest cd snapshot (
http://88.198.41.209/build/latest-slim.iso) . It has a boot time
option that disables high resolutions shells.
If you want to safe some download time / bandwidth you may
Hi All,
If anybody missed it, here it is again :)
-- Forwarded message --
From: Tobias Gerschner [EMAIL PROTECTED]
Date: Jun 3, 2007 9:03 AM
Subject: [yoper-announce] yoper 3.0 rc2 released
To: [EMAIL PROTECTED], [EMAIL PROTECTED],
[EMAIL PROTECTED], [EMAIL PROTECTED]
Hi,
The
@lists.yoper.com
https://morpheus.pingos.org/cgi-bin/mailman/listinfo/yoper-dev
___
yoper-dev mailing list
yoper-dev@lists.yoper.com
https://morpheus.pingos.org/cgi-bin/mailman/listinfo/yoper-dev
Dear Ladies and Gentlemen,
I have tested Yoper 3.0RC1.
I ran into a video screen problem, which I recognized from KANOTIX and Knoppix
(versions from last year).
The screen-picture was projected far to the left (so ran off the screen). I
have a Matrox Millenium G400.
When I lowered the screen
Hi,
The Yoper team, together with lead-developer Tobias Gerschner, are
proud to announce the first release candidate of Yoper GNU/Linux 3.0,
codename 'Ilmenite'.
This release candidate is available in 3 fashions as a slim CD of
approx 146 MB. A regular CD version ( 680 MB ) and a live CD of
Hi,
FYI. The xorg7 branch is now obsolete and the rpms and the xorg7
svntree got merged to rocketfuel. So
1) do not try to commit to the xorg7 branch
2) remove the xorg7 component from your package manager.
So what's left to be done on the TO-DO list for the next release.
Arnulf do you have
2006/11/9, Chakkaradeep C C [EMAIL PROTECTED]:
Hi Tobias and all,
I tried these,
smart update
smart install xorg-x11-base kdmctrl
And I got the following,
warning : [EMAIL PROTECTED] is
already installed
error : 'kdmctrl' matches no packages
Any suggestions ?
Which ISO did you try to
Hi All,
The ISO 2.92 (without xorg-7.1) got installed taking the same time to install in Microsoft Virtual PC. There is nothing to coonfigure except that you need to set the Networking as Shared so that it also takes the same IP address as host and you can browse.
I entered these for my
On Thursday 02 November 2006 05:44, Chakkaradeep C C wrote:
Hi Tobias and all,
On 11/2/06, Tobias Gerschner [EMAIL PROTECTED] wrote:
Hi,
it sounds like that is the partition detection script . Most likely it
freezes during a mount attempt.
Yes. its partition detection script.
Please
On Thursday 02 November 2006 09:51, Chakkaradeep C C wrote:
Hi Mark,
On 11/2/06, Mark [EMAIL PROTECTED] wrote:
As Tobias mentioned, it does seem to be a partitioner issue. On my own
test, I
found the same problem - if you simply partition the drive using another
distro, Yoper 2.92 will
On 11/2/06, Mark [EMAIL PROTECTED] wrote:
Even calling the installer script from the command line?The 2.92 test has nogui as you know, and Tobias asked us to run the installer via the shellscript. I have tested it a few times and found it worked fine - apart from
when there was no pre-partitioned
Hi Tobias and all,On 11/2/06, Tobias Gerschner [EMAIL PROTECTED] wrote:
Hi,it sounds like that is the partition detection script . Most likely it freezes during a mount attempt.Yes. its partition detection script.
Please go into a different terminal and do ps axu |grep mountTried.
If you see a
Hi all,Ok, i tried to install on an already partitioned system .. i ended up with cli ... and had to run setup from cli myself ..i picked up on the tip to run the following:/usr/lib/yis/yis-cli/yis-cli.sh
debugnow the installing went on .. i did everything i was asked and .. installed bootloader
On Tuesday 17 October 2006 01:54, Tobias Gerschner wrote:
Well that may be. That's the point where I should start digging in,
though I don't have vmware running right now. I definitely need more
info tough. We see the problem but not the cause yet.
If you can dig some more out please share it
OK, I partitioned the virtual drive by installing another distro first and
creating the partitions that way. This allows the 2.92 install to work :)
I don't have a free unpartitioned real drive I can test to see if this problem
occurs there.
Yoper 2.9x is the only distro I have tried which fails
A very quick initial report from my test.
Running the 2.92 test in a VM, using the settings I described in the how-to I
wrote a few weeks ago. Basically, 368mb ram and virtual IDE disk.
On the agree/disagree section, I would change the wording to I agree...
rather than I do agree... The I do
Hi Mark,
thanks for the very quick response!
2006/10/17, Mark [EMAIL PROTECTED]:
A very quick initial report from my test.
Running the 2.92 test in a VM, using the settings I described in the how-to I
wrote a few weeks ago. Basically, 368mb ram and virtual IDE disk.
On the agree/disagree
On Monday 16 October 2006 20:18, Tobias Gerschner wrote:
Hi Mark,
thanks for the very quick response!
2006/10/17, Mark [EMAIL PROTECTED]:
A very quick initial report from my test.
Running the 2.92 test in a VM, using the settings I described in the
how-to I wrote a few weeks ago.
2006/10/17, Mark [EMAIL PROTECTED]:
On Monday 16 October 2006 20:18, Tobias Gerschner wrote:
Hi Mark,
thanks for the very quick response!
2006/10/17, Mark [EMAIL PROTECTED]:
A very quick initial report from my test.
Running the 2.92 test in a VM, using the settings I described in the
Moin,
ihave test the iso on my lap, everything went fine here.
todo is:
localization
grub
and i think all is good for the next Balcksand version.
greets Arnulf
___
yoper-dev mailing list
yoper-dev@lists.yoper.com
Hi,
you got all the aspects correctly. The scripts are mainly from Knoppix
and Kanotix and in some terms simplified for Yoper. So looking at
KNOPPIX/KANOTIX is surely a good idea.
At the following I just describe the idea, how I wanted to adress the
problem. However if you do this task I am
*Subject:* Re: [yoper-dev] Yoper tools
A meeting would be nice, but some info in the wiki,
forum,e-mail list or some other place is also good.
At the moment i think most of us is confused and has
no idea whats going on with the tools
for YoperConf and it will help us a lot, you will have everything in YoperConf :)..
-Original Message-From:
[EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of pettern
kSent: Wednesday, May 24, 2006 9:11 PMTo: yoper-dev -
open minded discussionSubject: Re: [yoper-dev] Yoper
-From:
[EMAIL PROTECTED][mailto:[EMAIL PROTECTED]]On Behalf Of
petternkSent: Wednesday, May 24, 2006 9:11 PMTo: yoper-dev -open minded discussionSubject: Re: [yoper-dev] YopertoolsAmeeting would be nice, but some info in thewiki, forum,e-mail list or some other place
*Subject:* Re: [yoper-dev] Yoper tools
A meeting would be nice, but some info in the wiki,
forum,e-mail list or some other place is also good.
At the moment i think most of us is confused and has
no idea whats going on with the tools
is not enough; we must apply. Willing is not enough; we must do.
___yoper-dev mailing listyoper-dev@lists.yoper.com
https://morpheus.pingos.org/cgi-bin/mailman/listinfo/yoper-dev
___
yoper-dev mailing list
yoper-dev
or be incorporated into a larger tool set? Thats where I'm at
with my tool set.
Walter
-Original Message-From:
[EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]On Behalf Of pettern
kSent: Wednesday, May 24, 2006 9:11 PMTo: yoper-dev -
open minded discussionSubject: Re: [yoper-dev] Yoper
Hi Pettern and all,On 5/25/06, Petter K [EMAIL PROTECTED] wrote:
HiI have been busy latly because im finishing my bachelor degree and now ihave no idea whats going on with development of tools for yoper.I thought Tobias, Chaks and Jurgen was making YIS with all tools needed
for yoper installation
, 2006 9:11 PMTo: yoper-dev -
open minded discussionSubject: Re: [yoper-dev] Yoper
toolsAmeeting would be nice, but some info in the
wiki, forum,e-mail list or some other place is also good. At the moment i
think most of us is confused and has no idea whats going on with the tools
Hi All,
This mail is regarding Yoper Meet which is going to be held at 19:00
hrs UTC. This is an important Meet as we are going to discuss regarding
the plans for next release.
I would be happy if yoperians could make themself free for the meet.
Thank You.-- Regards,C.C.Chakkaradeep,Novatium
i will be there.
On Sat, 06 May 2006 14:57:23 +0300, Chakkaradeep C C
[EMAIL PROTECTED] wrote:
Hi All,
This mail is regarding Yoper Meet which is going to be held at 19:00 hrs
UTC. This is an important Meet as we are going to discuss regarding the
plans for next release.
I would be happy
Now is the time ;)
--
Tobias Gerschner
Member of Board of Yoper Ltd. NZ
Knowing is not enough; we must apply. Willing is not enough; we must do.
___
yoper-dev mailing list
yoper-dev@lists.yoper.com
meeting is up!On 5/6/06, Tobias Gerschner [EMAIL PROTECTED] wrote:
Now is the time ;)--Tobias GerschnerMember of Board of Yoper Ltd. NZKnowing is not enough; we must apply. Willing is not enough; we must do.___
yoper-dev mailing
53 matches
Mail list logo
