Am 15.12.2014 um 11:45 schrieb Stefan G. Weichinger: > Am 15.12.2014 um 11:03 schrieb Stefan G. Weichinger: > >> gnome-control-center shows both but enabling the 2nd simply doesn't work. >> >> This is all without trying to use wayland! Just "plain" gnome ... >> >> I even tried the kernel-options to enable the HDMI .. hmm > > I played with stuff like "xrandr --output HDMI-1 --right-of DVI-I-1" ... > this enabled the monitor ... and then somehow also the > gnome-control-center settings started working! > > I tested a reboot, looks good so far! Now on to wayland stuff ;-)
I don't get wayland running here ... see the attached log of a failing attempt. This is an up2date gentoo ~amd64 box with the gnome-overlay attached (although to me it looks that the packages for Gnome 3.14 are moved into portage anyway in these days). While I am at it (doing the nouveau-move) I also wonder if my setup is "correct" or "as it should be". Looking at the log-file I wonder about all the lines containing "Failed" etc ... I don't have an xorg.conf anymore and have set: VIDEO_CARDS="nouveau" INPUT_DEVICES="evdev" The Xorg.1.log looks quite good, right? ;-)
-- Logs begin at Do 2014-11-06 08:01:41 CET, end at Mo 2014-12-15 16:24:22 CET. -- Dez 15 16:24:04 hiro.local kernel: audit: type=1006 audit(1418657044.608:379): pid=3497 uid=0 old-auid=4294967295 auid=1000 old-ses=4294967295 ses=4 res=1 Dez 15 16:24:04 hiro.local gdm-password][3497]: pam_unix(gdm-password:session): session opened for user sgw by (uid=0) Dez 15 16:24:04 hiro.local systemd[1]: Starting user-1000.slice. Dez 15 16:24:04 hiro.local systemd[1]: Created slice user-1000.slice. Dez 15 16:24:04 hiro.local systemd[1]: Starting User Manager for UID 1000... Dez 15 16:24:04 hiro.local systemd[1]: Starting Session 4 of user sgw. Dez 15 16:24:04 hiro.local systemd-logind[742]: New session 4 of user sgw. Dez 15 16:24:04 hiro.local systemd[1]: Started Session 4 of user sgw. Dez 15 16:24:04 hiro.local systemd[3502]: pam_unix(systemd-user:session): session opened for user sgw by (uid=0) Dez 15 16:24:04 hiro.local systemd[3502]: Starting Sockets. Dez 15 16:24:04 hiro.local systemd[3502]: Reached target Sockets. Dez 15 16:24:04 hiro.local systemd[3502]: Starting Paths. Dez 15 16:24:04 hiro.local systemd[3502]: Reached target Paths. Dez 15 16:24:04 hiro.local systemd[3502]: Starting Timers. Dez 15 16:24:04 hiro.local systemd[3502]: Reached target Timers. Dez 15 16:24:04 hiro.local systemd[3502]: Starting Basic System. Dez 15 16:24:04 hiro.local systemd[3502]: Reached target Basic System. Dez 15 16:24:04 hiro.local systemd[3502]: Starting Default. Dez 15 16:24:04 hiro.local systemd[3502]: Reached target Default. Dez 15 16:24:04 hiro.local systemd[3502]: Startup finished in 12ms. Dez 15 16:24:04 hiro.local systemd[1]: Started User Manager for UID 1000. Dez 15 16:24:04 hiro.local gdm-Xorg-:0[3287]: (II) AIGLX: Suspending AIGLX clients for VT switch Dez 15 16:24:04 hiro.local gdm-Xorg-:0[3287]: (II) NOUVEAU(0): NVLeaveVT is called. Dez 15 16:24:05 hiro.local gnome-session[3514]: WARNING: Could not parse desktop file remmina-applet.desktop or it references a not found TryExec binary Dez 15 16:24:05 hiro.local gnome-session[3514]: WARNING: Could not parse desktop file trackerd.desktop or it references a not found TryExec binary Dez 15 16:24:05 hiro.local gnome-session[3514]: gnome-session[3514]: WARNING: Could not parse desktop file remmina-applet.desktop or it references a not found TryExec binary Dez 15 16:24:05 hiro.local gnome-session[3514]: gnome-session[3514]: WARNING: Could not parse desktop file trackerd.desktop or it references a not found TryExec binary Dez 15 16:24:05 hiro.local gnome-session[3514]: GLib-CRITICAL: g_environ_setenv: assertion 'value != NULL' failed Dez 15 16:24:05 hiro.local gnome-session[3514]: gnome-session[3514]: GLib-CRITICAL: g_environ_setenv: assertion 'value != NULL' failed Dez 15 16:24:05 hiro.local systemd-logind[742]: kernel does not support evdev-revocation Dez 15 16:24:05 hiro.local gnome-session[3514]: glamor: EGL version 1.4 (DRI2): Dez 15 16:24:05 hiro.local org.a11y.Bus[3518]: Activating service name='org.a11y.atspi.Registry' Dez 15 16:24:05 hiro.local org.a11y.Bus[3518]: Successfully activated service 'org.a11y.atspi.Registry' Dez 15 16:24:05 hiro.local org.a11y.atspi.Registry[3544]: SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry Dez 15 16:24:05 hiro.local rtkit-daemon[1001]: Successfully made thread 3552 of process 3552 (/usr/bin/pulseaudio) owned by '1000' high priority at nice level -11. Dez 15 16:24:05 hiro.local rtkit-daemon[1001]: Supervising 2 threads of 2 processes of 2 users. Dez 15 16:24:05 hiro.local rtkit-daemon[1001]: Supervising 2 threads of 2 processes of 2 users. Dez 15 16:24:05 hiro.local rtkit-daemon[1001]: Failed to make thread 3553 RT: Operation not permitted Dez 15 16:24:05 hiro.local rtkit-daemon[1001]: Supervising 2 threads of 2 processes of 2 users. Dez 15 16:24:05 hiro.local rtkit-daemon[1001]: Failed to make thread 3553 RT: Operation not permitted Dez 15 16:24:05 hiro.local rtkit-daemon[1001]: Supervising 2 threads of 2 processes of 2 users. Dez 15 16:24:05 hiro.local rtkit-daemon[1001]: Failed to make thread 3553 RT: Operation not permitted Dez 15 16:24:05 hiro.local rtkit-daemon[1001]: Supervising 2 threads of 2 processes of 2 users. Dez 15 16:24:05 hiro.local rtkit-daemon[1001]: Failed to make thread 3553 RT: Operation not permitted Dez 15 16:24:05 hiro.local rtkit-daemon[1001]: Supervising 2 threads of 2 processes of 2 users. Dez 15 16:24:05 hiro.local rtkit-daemon[1001]: Failed to make thread 3553 RT: Operation not permitted Dez 15 16:24:05 hiro.local rtkit-daemon[1001]: Supervising 2 threads of 2 processes of 2 users. Dez 15 16:24:05 hiro.local rtkit-daemon[1001]: Failed to make thread 3555 RT: Operation not permitted Dez 15 16:24:05 hiro.local rtkit-daemon[1001]: Supervising 2 threads of 2 processes of 2 users. Dez 15 16:24:05 hiro.local rtkit-daemon[1001]: Failed to make thread 3555 RT: Operation not permitted Dez 15 16:24:05 hiro.local rtkit-daemon[1001]: Supervising 2 threads of 2 processes of 2 users. Dez 15 16:24:05 hiro.local rtkit-daemon[1001]: Failed to make thread 3555 RT: Operation not permitted Dez 15 16:24:05 hiro.local rtkit-daemon[1001]: Supervising 2 threads of 2 processes of 2 users. Dez 15 16:24:05 hiro.local rtkit-daemon[1001]: Failed to make thread 3555 RT: Operation not permitted Dez 15 16:24:05 hiro.local rtkit-daemon[1001]: Supervising 2 threads of 2 processes of 2 users. Dez 15 16:24:05 hiro.local rtkit-daemon[1001]: Failed to make thread 3555 RT: Operation not permitted Dez 15 16:24:05 hiro.local rtkit-daemon[1001]: Supervising 2 threads of 2 processes of 2 users. Dez 15 16:24:05 hiro.local rtkit-daemon[1001]: Failed to make thread 3556 RT: Operation not permitted Dez 15 16:24:05 hiro.local rtkit-daemon[1001]: Supervising 2 threads of 2 processes of 2 users. Dez 15 16:24:05 hiro.local rtkit-daemon[1001]: Failed to make thread 3556 RT: Operation not permitted Dez 15 16:24:05 hiro.local rtkit-daemon[1001]: Supervising 2 threads of 2 processes of 2 users. Dez 15 16:24:05 hiro.local rtkit-daemon[1001]: Failed to make thread 3556 RT: Operation not permitted Dez 15 16:24:05 hiro.local rtkit-daemon[1001]: Supervising 2 threads of 2 processes of 2 users. Dez 15 16:24:05 hiro.local rtkit-daemon[1001]: Failed to make thread 3556 RT: Operation not permitted Dez 15 16:24:05 hiro.local rtkit-daemon[1001]: Supervising 2 threads of 2 processes of 2 users. Dez 15 16:24:05 hiro.local rtkit-daemon[1001]: Failed to make thread 3556 RT: Operation not permitted Dez 15 16:24:05 hiro.local dbus[738]: [system] Activating via systemd: service name='org.bluez' unit='dbus-org.bluez.service' Dez 15 16:24:05 hiro.local dbus[738]: [system] Activation via systemd failed for unit 'dbus-org.bluez.service': Unit dbus-org.bluez.service failed to load: No such file or directory. Dez 15 16:24:05 hiro.local pulseaudio[3552]: [pulseaudio] ltdl-bind-now.c: Failed to open module module-esound-protocol-tcp.so: module-esound-protocol-tcp.so: Kann die Shared-Object-Datei nicht öffnen: Datei oder Verzeichnis nicht gefunden Dez 15 16:24:05 hiro.local pulseaudio[3552]: [pulseaudio] module.c: Failed to open module "module-esound-protocol-tcp". Dez 15 16:24:05 hiro.local pulseaudio[3552]: [pulseaudio] module-gconf.c: pa_module_load() failed Dez 15 16:24:05 hiro.local pulseaudio[3552]: [pulseaudio] module.c: Module "module-zeroconf-publish" should be loaded once at most. Refusing to load. Dez 15 16:24:05 hiro.local pulseaudio[3552]: [pulseaudio] module-gconf.c: pa_module_load() failed Dez 15 16:24:05 hiro.local pulseaudio[3552]: [pulseaudio] bluez5-util.c: GetManagedObjects() failed: org.freedesktop.systemd1.LoadFailed: Unit dbus-org.bluez.service failed to load: No such file or directory. Dez 15 16:24:05 hiro.local org.gnome.evolution.dataserver.Sources3[3518]: Failed to migrate '/home/sgw/.gconf/apps/evolution/mail/%gconf.xml': Fehler in Zeile 1, Zeichen 1: Dokument ist leer oder enthält nur LeerraumFailed to migrate '/home/sgw/.gconf/apps/evolution/addressbook/%gconf.xml': Fehler in Zeile 1, Zeichen 1: Dokument ist leer oder enthält nur LeerraumFailed to migrate '/home/sgw/.gconf/apps/evolution/tasks/%gconf.xml': Fehler in Zeile 1, Zeichen 1: Dokument ist leer oder enthält nur LeerraumFailed to migrate '/home/sgw/.gconf/apps/evolution/memos/%gconf.xml': Fehler in Zeile 1, Zeichen 1: Dokument ist leer oder enthält nur Leerraum Dez 15 16:24:05 hiro.local org.gnome.evolution.dataserver.Sources3[3518]: (evolution-source-registry:3571): libebackend-WARNING **: collection_backend_load_resources: In der Quelldatei fehlt eine [Data Source]-Gruppe Dez 15 16:24:05 hiro.local org.gnome.evolution.dataserver.Sources3[3518]: (evolution-source-registry:3571): libebackend-WARNING **: collection_backend_load_resources: In der Quelldatei fehlt eine [Data Source]-Gruppe Dez 15 16:24:05 hiro.local org.gnome.OnlineAccounts[3518]: goa-daemon-Message: goa-daemon version 3.14.2 starting Dez 15 16:24:05 hiro.local org.gnome.evolution.dataserver.Sources3[3518]: (evolution-source-registry:3571): module-gnome-online-accounts-CRITICAL **: gnome_online_accounts_config_mail_identity: assertion 'goa_mail != NULL' failed Dez 15 16:24:05 hiro.local dbus[738]: [system] Activating via systemd: service name='org.freedesktop.GeoClue2' unit='geoclue.service' Dez 15 16:24:05 hiro.local systemd[1]: Starting Location Lookup Service... Dez 15 16:24:05 hiro.local dbus[738]: [system] Successfully activated service 'org.freedesktop.GeoClue2' Dez 15 16:24:05 hiro.local systemd[1]: Started Location Lookup Service. Dez 15 16:24:05 hiro.local dbus[738]: [system] Activating via systemd: service name='org.freedesktop.ModemManager1' unit='dbus-org.freedesktop.ModemManager1.service' Dez 15 16:24:05 hiro.local dbus[738]: [system] Activation via systemd failed for unit 'dbus-org.freedesktop.ModemManager1.service': Unit dbus-org.freedesktop.ModemManager1.service failed to load: No such file or directory. Dez 15 16:24:05 hiro.local geoclue[3607]: (geoclue:3607): Geoclue-WARNING **: Failed to connect to ModemManager: Error calling StartServiceByName for org.freedesktop.ModemManager1: GDBus.Error:org.freedesktop.systemd1.LoadFailed: Unit dbus-org.freedesktop.ModemManager1.service failed to load: No such file or directory. Dez 15 16:24:06 hiro.local polkitd[796]: Registered Authentication Agent for unix-session:4 (system bus name :1.110 [/usr/bin/gnome-shell --wayland --display-server], object path /org/freedesktop/PolicyKit1/AuthenticationAgent, locale de_DE.utf8) Dez 15 16:24:06 hiro.local gnome-session[3514]: Gjs-Message: JS LOG: No permission to trigger offline updates: Polkit.Error: GDBus.Error:org.freedesktop.PolicyKit1.Error.Failed: Action org.freedesktop.packagekit.trigger-offline-update is not registered Dez 15 16:24:06 hiro.local gnome-keyring-daemon[3511]: Gkm: using old keyring directory: /home/sgw/.gnome2/keyrings Dez 15 16:24:06 hiro.local gnome-keyring-daemon[3511]: Gkm: using old keyring directory: /home/sgw/.gnome2/keyrings Dez 15 16:24:06 hiro.local rtkit-daemon[1001]: Successfully made thread 3649 of process 3649 (/usr/bin/pulseaudio) owned by '1000' high priority at nice level -11. Dez 15 16:24:06 hiro.local rtkit-daemon[1001]: Supervising 3 threads of 3 processes of 2 users. Dez 15 16:24:06 hiro.local pulseaudio[3649]: Daemon already running. Dez 15 16:24:06 hiro.local gnome-session[3514]: (gnome-shell:3523): Clutter-CRITICAL **: clutter_input_device_get_pointer_stage: assertion 'CLUTTER_IS_INPUT_DEVICE (device)' failed Dez 15 16:24:06 hiro.local kernel: gnome-shell[3523]: segfault at 0 ip 00007f3b970d81e6 sp 00007fff8c552120 error 4 in libmutter.so.0.0.0[7f3b97027000+ff000] Dez 15 16:24:06 hiro.local kernel: audit: type=1701 audit(1418657046.185:380): auid=1000 uid=1000 gid=100 ses=4 pid=3523 comm="gnome-shell" exe="/usr/bin/gnome-shell" sig=11 Dez 15 16:24:06 hiro.local gnome-shell[3523]: <audit-1701> auid=1000 uid=1000 gid=100 ses=4 pid=3523 comm="gnome-shell" exe="/usr/bin/gnome-shell" sig=11 Dez 15 16:24:06 hiro.local polkitd[796]: Unregistered Authentication Agent for unix-session:4 (system bus name :1.110, object path /org/freedesktop/PolicyKit1/AuthenticationAgent, locale de_DE.utf8) (disconnected from bus) Dez 15 16:24:06 hiro.local dbus[738]: [system] Activating via systemd: service name='org.freedesktop.timedate1' unit='dbus-org.freedesktop.timedate1.service' Dez 15 16:24:06 hiro.local systemd[1]: Starting Time & Date Service... Dez 15 16:24:06 hiro.local gnome-session[3514]: SSH_AUTH_SOCK=/run/user/1000/keyring/ssh Dez 15 16:24:06 hiro.local gnome-keyring-daemon[3511]: The Secret Service was already initialized Dez 15 16:24:06 hiro.local gnome-session[3514]: SSH_AUTH_SOCK=/run/user/1000/keyring/ssh Dez 15 16:24:06 hiro.local gnome-session[3514]: GPG_AGENT_INFO=/run/user/1000/keyring/gpg:0:1 Dez 15 16:24:06 hiro.local org.freedesktop.secrets[3518]: SSH_AUTH_SOCK=/run/user/1000/keyring/ssh Dez 15 16:24:06 hiro.local org.freedesktop.secrets[3518]: GPG_AGENT_INFO=/run/user/1000/keyring/gpg:0:1 Dez 15 16:24:06 hiro.local gnome-session[3514]: SSH_AUTH_SOCK=/run/user/1000/keyring/ssh Dez 15 16:24:06 hiro.local gnome-session[3514]: GPG_AGENT_INFO=/run/user/1000/keyring/gpg:0:1 Dez 15 16:24:06 hiro.local dbus[738]: [system] Successfully activated service 'org.freedesktop.timedate1' Dez 15 16:24:06 hiro.local systemd[1]: Started Time & Date Service. Dez 15 16:24:06 hiro.local systemd-timedated[3673]: /dev/rtc is busy. Is somebody keeping it open continuously? That's not a good idea... Returning a bogus RTC timestamp. Dez 15 16:24:06 hiro.local gnome-session[3514]: (EE) Dez 15 16:24:06 hiro.local gnome-session[3514]: Fatal server error: Dez 15 16:24:06 hiro.local gnome-session[3514]: (EE) failed to dispatch Wayland events: Connection reset by peer Dez 15 16:24:06 hiro.local gnome-session[3514]: (EE) Dez 15 16:24:06 hiro.local org.gnome.Caribou.Daemon[3518]: ** (caribou:3611): WARNING **: AT-SPI: Error in GetItems, sender=org.freedesktop.DBus, error=The name :1.0 was not provided by any .service files Dez 15 16:24:06 hiro.local gnome-session[3514]: gnome-session[3514]: WARNING: Application 'gnome-shell-wayland.desktop' killed by signal 11 Dez 15 16:24:06 hiro.local gnome-session[3514]: WARNING: Application 'gnome-shell-wayland.desktop' killed by signal 11 Dez 15 16:24:06 hiro.local gnome-session[3514]: Unrecoverable failure in required component gnome-shell-wayland.desktop Dez 15 16:24:06 hiro.local gdm-password][3497]: pam_unix(gdm-password:session): session closed for user sgw Dez 15 16:24:06 hiro.local gdm-Xorg-:0[3287]: (II) AIGLX: Resuming AIGLX clients after VT switch Dez 15 16:24:06 hiro.local gdm-Xorg-:0[3287]: (II) NOUVEAU(0): NVEnterVT is called. Dez 15 16:24:06 hiro.local gdm-session-worker[3497]: <3>GLib: Source ID 49 was not found when attempting to remove it Dez 15 16:24:06 hiro.local org.gnome.Caribou.Daemon[3518]: (caribou:3611): Gdk-WARNING **: caribou: Fatal IO error 11 (Die Ressource ist zur Zeit nicht verfügbar) on X server :1. Dez 15 16:24:06 hiro.local gnome-session[3514]: (gnome-settings-daemon:3638): Gdk-WARNING **: gnome-settings-daemon: Fatal IO error 111 (Verbindungsaufbau abgelehnt) on X server :1. Dez 15 16:24:06 hiro.local gdm-Xorg-:0[3287]: (II) NOUVEAU(0): EDID vendor "GSM", prod id 22307 Dez 15 16:24:06 hiro.local gdm-Xorg-:0[3287]: (II) NOUVEAU(0): Using hsync ranges from config file Dez 15 16:24:06 hiro.local gdm-Xorg-:0[3287]: (II) NOUVEAU(0): Using vrefresh ranges from config file Dez 15 16:24:06 hiro.local gdm-Xorg-:0[3287]: (II) NOUVEAU(0): Printing DDC gathered Modelines: Dez 15 16:24:06 hiro.local gdm-Xorg-:0[3287]: (II) NOUVEAU(0): Modeline "1920x1080"x0.0 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.6 kHz eP) Dez 15 16:24:06 hiro.local gdm-Xorg-:0[3287]: (II) NOUVEAU(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz e) Dez 15 16:24:06 hiro.local gdm-Xorg-:0[3287]: (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) Dez 15 16:24:06 hiro.local gdm-Xorg-:0[3287]: (II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e) Dez 15 16:24:06 hiro.local gdm-Xorg-:0[3287]: (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e) Dez 15 16:24:06 hiro.local gdm-Xorg-:0[3287]: (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) Dez 15 16:24:06 hiro.local gdm-Xorg-:0[3287]: (II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) Dez 15 16:24:06 hiro.local gdm-Xorg-:0[3287]: (II) NOUVEAU(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e) Dez 15 16:24:06 hiro.local gdm-Xorg-:0[3287]: (II) NOUVEAU(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e) Dez 15 16:24:06 hiro.local gdm-Xorg-:0[3287]: (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) Dez 15 16:24:06 hiro.local gdm-Xorg-:0[3287]: (II) NOUVEAU(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e) Dez 15 16:24:06 hiro.local gdm-Xorg-:0[3287]: (II) NOUVEAU(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e) Dez 15 16:24:06 hiro.local gdm-Xorg-:0[3287]: (II) NOUVEAU(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e) Dez 15 16:24:06 hiro.local gdm-Xorg-:0[3287]: (II) NOUVEAU(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e) Dez 15 16:24:06 hiro.local gdm-Xorg-:0[3287]: (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e) Dez 15 16:24:06 hiro.local gdm-Xorg-:0[3287]: (II) NOUVEAU(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e) Dez 15 16:24:06 hiro.local gdm-Xorg-:0[3287]: The XKEYBOARD keymap compiler (xkbcomp) reports: Dez 15 16:24:06 hiro.local gdm-Xorg-:0[3287]: > Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols Dez 15 16:24:06 hiro.local gdm-Xorg-:0[3287]: > Ignoring extra symbols Dez 15 16:24:06 hiro.local gdm-Xorg-:0[3287]: > Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols Dez 15 16:24:06 hiro.local gdm-Xorg-:0[3287]: > Ignoring extra symbols Dez 15 16:24:06 hiro.local gdm-Xorg-:0[3287]: Errors from xkbcomp are not fatal to the X server Dez 15 16:24:06 hiro.local gdm-Xorg-:0[3287]: The XKEYBOARD keymap compiler (xkbcomp) reports: Dez 15 16:24:06 hiro.local gdm-Xorg-:0[3287]: > Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols Dez 15 16:24:06 hiro.local gdm-Xorg-:0[3287]: > Ignoring extra symbols Dez 15 16:24:06 hiro.local gdm-Xorg-:0[3287]: > Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols Dez 15 16:24:06 hiro.local gdm-Xorg-:0[3287]: > Ignoring extra symbols Dez 15 16:24:06 hiro.local gdm-Xorg-:0[3287]: Errors from xkbcomp are not fatal to the X server Dez 15 16:24:06 hiro.local gdm-Xorg-:0[3287]: The XKEYBOARD keymap compiler (xkbcomp) reports: Dez 15 16:24:06 hiro.local gdm-Xorg-:0[3287]: > Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols Dez 15 16:24:06 hiro.local gdm-Xorg-:0[3287]: > Ignoring extra symbols Dez 15 16:24:06 hiro.local gdm-Xorg-:0[3287]: > Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols Dez 15 16:24:06 hiro.local gdm-Xorg-:0[3287]: > Ignoring extra symbols Dez 15 16:24:06 hiro.local gdm-Xorg-:0[3287]: Errors from xkbcomp are not fatal to the X server Dez 15 16:24:06 hiro.local gdm-Xorg-:0[3287]: The XKEYBOARD keymap compiler (xkbcomp) reports: Dez 15 16:24:06 hiro.local gdm-Xorg-:0[3287]: > Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols Dez 15 16:24:06 hiro.local gdm-Xorg-:0[3287]: > Ignoring extra symbols Dez 15 16:24:06 hiro.local gdm-Xorg-:0[3287]: > Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols Dez 15 16:24:06 hiro.local gdm-Xorg-:0[3287]: > Ignoring extra symbols Dez 15 16:24:06 hiro.local gdm-Xorg-:0[3287]: Errors from xkbcomp are not fatal to the X server Dez 15 16:24:06 hiro.local org.gnome.Shell.CalendarServer[3518]: (gnome-shell-calendar-server:3565): ShellCalendarServer-CRITICAL **: create_client_for_source: assertion 'client == NULL' failed Dez 15 16:24:07 hiro.local gdm-Xorg-:0[3287]: (II) AIGLX: Suspending AIGLX clients for VT switch Dez 15 16:24:07 hiro.local gdm-Xorg-:0[3287]: (II) NOUVEAU(0): NVLeaveVT is called. Dez 15 16:24:10 hiro.local org.freedesktop.Telepathy.ConnectionManager.haze[3518]: tp-glib-Message: Exiting Dez 15 16:24:22 hiro.local puppet-agent[773]: Could not request certificate: getaddrinfo: Name or service not known
[ 904.545] This is a pre-release version of the X server from The X.Org Foundation. It is not supported in any way. Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/. Select the "xorg" product for bugs you find in this release. Before reporting bugs in pre-release versions please check the latest version in the X.Org Foundation git repository. See http://wiki.x.org/wiki/GitPage for git access instructions. [ 904.545] X.Org X Server 1.16.2.901 (1.16.3 RC 1) Release Date: 2014-12-09 [ 904.546] X Protocol Version 11, Revision 0 [ 904.546] Build Operating System: Linux 3.18.0-gentoo x86_64 Gentoo [ 904.546] Current Operating System: Linux hiro.local 3.18.0-gentoo #2 SMP Mon Dec 15 08:55:17 CET 2014 x86_64 [ 904.546] Kernel command line: BOOT_IMAGE=/__active/root_rasa/boot/vmlinuz-3.18.0-gentoo root=UUID=741835e6-95a3-49f3-ba85-2ffe3ea0730d ro rootflags=subvol=__active/root_rasa init=/usr/lib/systemd/systemd modprobe.blacklist=nvidia systemd.setenv=GPUMOD=nouveau [ 904.547] Build Date: 15 December 2014 10:10:08AM [ 904.548] [ 904.548] Current version of pixman: 0.32.6 [ 904.549] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 904.549] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 904.550] (==) Log file: "/var/log/Xorg.1.log", Time: Mon Dec 15 13:25:50 2014 [ 904.551] (==) Using config directory: "/etc/X11/xorg.conf.d" [ 904.551] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 904.551] (==) No Layout section. Using the first Screen section. [ 904.551] (==) No screen section available. Using defaults. [ 904.552] (**) |-->Screen "Default Screen Section" (0) [ 904.552] (**) | |-->Monitor "<default monitor>" [ 904.552] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 904.552] (==) Automatically adding devices [ 904.552] (==) Automatically enabling devices [ 904.552] (==) Automatically adding GPU devices [ 904.552] (==) FontPath set to: /usr/share/fonts/misc/, /usr/share/fonts/TTF/, /usr/share/fonts/OTF/, /usr/share/fonts/Type1/, /usr/share/fonts/100dpi/, /usr/share/fonts/75dpi/ [ 904.552] (==) ModulePath set to "/usr/lib64/xorg/modules" [ 904.552] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 904.552] (II) Loader magic: 0x808d20 [ 904.552] (II) Module ABI versions: [ 904.552] X.Org ANSI C Emulation: 0.4 [ 904.552] X.Org Video Driver: 18.0 [ 904.552] X.Org XInput driver : 21.0 [ 904.552] X.Org Server Extension : 8.0 [ 904.553] (II) systemd-logind: took control of session /org/freedesktop/login1/session/_32 [ 904.553] (II) xfree86: Adding drm device (/dev/dri/card0) [ 904.553] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 8 paused 0 [ 904.556] (--) PCI:*(0:1:0:0) 10de:0de1:0000:0000 rev 161, Mem @ 0xfa000000/16777216, 0xd0000000/134217728, 0xd8000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288 [ 904.556] (II) LoadModule: "glx" [ 904.556] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so [ 904.559] (II) Module glx: vendor="X.Org Foundation" [ 904.559] compiled for 1.16.2.901, module version = 1.0.0 [ 904.559] ABI class: X.Org Server Extension, version 8.0 [ 904.559] (==) AIGLX enabled [ 904.559] (==) Matched nouveau as autoconfigured driver 0 [ 904.559] (==) Matched nv as autoconfigured driver 1 [ 904.559] (==) Matched nouveau as autoconfigured driver 2 [ 904.559] (==) Matched nv as autoconfigured driver 3 [ 904.559] (==) Matched modesetting as autoconfigured driver 4 [ 904.559] (==) Matched fbdev as autoconfigured driver 5 [ 904.559] (==) Matched vesa as autoconfigured driver 6 [ 904.559] (==) Assigned the driver to the xf86ConfigLayout [ 904.559] (II) LoadModule: "nouveau" [ 904.559] (II) Loading /usr/lib64/xorg/modules/drivers/nouveau_drv.so [ 904.561] (II) Module nouveau: vendor="X.Org Foundation" [ 904.561] compiled for 1.16.2.901, module version = 1.0.11 [ 904.561] Module class: X.Org Video Driver [ 904.561] ABI class: X.Org Video Driver, version 18.0 [ 904.561] (II) LoadModule: "nv" [ 904.561] (II) Loading /usr/lib64/xorg/modules/drivers/nv_drv.so [ 904.562] (II) Module nv: vendor="X.Org Foundation" [ 904.562] compiled for 1.16.1, module version = 2.1.20 [ 904.562] Module class: X.Org Video Driver [ 904.562] ABI class: X.Org Video Driver, version 18.0 [ 904.562] (II) LoadModule: "modesetting" [ 904.562] (WW) Warning, couldn't open module modesetting [ 904.562] (II) UnloadModule: "modesetting" [ 904.562] (II) Unloading modesetting [ 904.562] (EE) Failed to load module "modesetting" (module does not exist, 0) [ 904.562] (II) LoadModule: "fbdev" [ 904.562] (II) Loading /usr/lib64/xorg/modules/drivers/fbdev_drv.so [ 904.563] (II) Module fbdev: vendor="X.Org Foundation" [ 904.563] compiled for 1.16.1, module version = 0.4.4 [ 904.563] Module class: X.Org Video Driver [ 904.563] ABI class: X.Org Video Driver, version 18.0 [ 904.563] (II) LoadModule: "vesa" [ 904.563] (II) Loading /usr/lib64/xorg/modules/drivers/vesa_drv.so [ 904.563] (II) Module vesa: vendor="X.Org Foundation" [ 904.563] compiled for 1.16.1, module version = 2.3.3 [ 904.563] Module class: X.Org Video Driver [ 904.563] ABI class: X.Org Video Driver, version 18.0 [ 904.563] (II) NOUVEAU driver [ 904.563] (II) NOUVEAU driver for NVIDIA chipset families : [ 904.563] RIVA TNT (NV04) [ 904.563] RIVA TNT2 (NV05) [ 904.563] GeForce 256 (NV10) [ 904.563] GeForce 2 (NV11, NV15) [ 904.563] GeForce 4MX (NV17, NV18) [ 904.563] GeForce 3 (NV20) [ 904.564] GeForce 4Ti (NV25, NV28) [ 904.564] GeForce FX (NV3x) [ 904.564] GeForce 6 (NV4x) [ 904.564] GeForce 7 (G7x) [ 904.564] GeForce 8 (G8x) [ 904.564] GeForce GTX 200 (NVA0) [ 904.564] GeForce GTX 400 (NVC0) [ 904.564] (II) NOUVEAU driver [ 904.564] (II) NOUVEAU driver for NVIDIA chipset families : [ 904.564] RIVA TNT (NV04) [ 904.564] RIVA TNT2 (NV05) [ 904.564] GeForce 256 (NV10) [ 904.564] GeForce 2 (NV11, NV15) [ 904.564] GeForce 4MX (NV17, NV18) [ 904.564] GeForce 3 (NV20) [ 904.564] GeForce 4Ti (NV25, NV28) [ 904.564] GeForce FX (NV3x) [ 904.564] GeForce 6 (NV4x) [ 904.564] GeForce 7 (G7x) [ 904.564] GeForce 8 (G8x) [ 904.564] GeForce GTX 200 (NVA0) [ 904.564] GeForce GTX 400 (NVC0) [ 904.564] (II) FBDEV: driver for framebuffer: fbdev [ 904.564] (II) VESA: driver for VESA chipsets: vesa [ 904.564] (++) using VT number 2 [ 904.564] (--) controlling tty is VT number 2, auto-enabling KeepTty [ 904.565] (II) [drm] nouveau interface version: 1.2.1 [ 904.565] (WW) Falling back to old probe method for fbdev [ 904.565] (II) Loading sub module "fbdevhw" [ 904.565] (II) LoadModule: "fbdevhw" [ 904.565] (II) Loading /usr/lib64/xorg/modules/libfbdevhw.so [ 904.565] (II) Module fbdevhw: vendor="X.Org Foundation" [ 904.565] compiled for 1.16.2.901, module version = 0.0.2 [ 904.565] ABI class: X.Org Video Driver, version 18.0 [ 904.565] (WW) Falling back to old probe method for vesa [ 904.565] (II) Loading sub module "dri2" [ 904.565] (II) LoadModule: "dri2" [ 904.565] (II) Module "dri2" already built-in [ 904.566] (--) NOUVEAU(0): Chipset: "NVIDIA NVC1" [ 904.566] (II) NOUVEAU(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 [ 904.566] (==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32 [ 904.566] (==) NOUVEAU(0): RGB weight 888 [ 904.566] (==) NOUVEAU(0): Default visual is TrueColor [ 904.566] (==) NOUVEAU(0): Using HW cursor [ 904.566] (==) NOUVEAU(0): GLX sync to VBlank enabled. [ 904.566] (==) NOUVEAU(0): Page flipping enabled [ 904.566] (==) NOUVEAU(0): Swap limit set to 1 [Max allowed 2] [ 904.566] (==) NOUVEAU(0): Page flipping synced to vblank by kernel. [ 904.566] (II) NOUVEAU(0): Initializing outputs ... [ 904.600] (II) NOUVEAU(0): Output DVI-I-1 has no monitor section [ 904.666] (II) NOUVEAU(0): Output HDMI-1 has no monitor section [ 904.689] (II) NOUVEAU(0): Output VGA-1 has no monitor section [ 904.689] (II) NOUVEAU(0): 3 crtcs needed for screen. [ 904.692] (II) NOUVEAU(0): Allocated crtc nr. 0 to this screen. [ 904.692] (II) NOUVEAU(0): Allocated crtc nr. 1 to this screen. [ 904.726] (II) NOUVEAU(0): EDID for output DVI-I-1 [ 904.726] (II) NOUVEAU(0): Manufacturer: GSM Model: 5723 Serial#: 42595 [ 904.726] (II) NOUVEAU(0): Year: 2009 Week: 9 [ 904.726] (II) NOUVEAU(0): EDID Version: 1.3 [ 904.726] (II) NOUVEAU(0): Digital Display Input [ 904.726] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 53 vert.: 30 [ 904.726] (II) NOUVEAU(0): Gamma: 2.20 [ 904.726] (II) NOUVEAU(0): DPMS capabilities: StandBy Suspend Off [ 904.726] (II) NOUVEAU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 [ 904.726] (II) NOUVEAU(0): First detailed timing is preferred mode [ 904.726] (II) NOUVEAU(0): redX: 0.633 redY: 0.351 greenX: 0.335 greenY: 0.608 [ 904.727] (II) NOUVEAU(0): blueX: 0.145 blueY: 0.058 whiteX: 0.313 whiteY: 0.329 [ 904.727] (II) NOUVEAU(0): Supported established timings: [ 904.727] (II) NOUVEAU(0): 720x400@70Hz [ 904.727] (II) NOUVEAU(0): 640x480@60Hz [ 904.727] (II) NOUVEAU(0): 640x480@75Hz [ 904.727] (II) NOUVEAU(0): 800x600@56Hz [ 904.727] (II) NOUVEAU(0): 800x600@60Hz [ 904.727] (II) NOUVEAU(0): 800x600@75Hz [ 904.727] (II) NOUVEAU(0): 832x624@75Hz [ 904.727] (II) NOUVEAU(0): 1024x768@60Hz [ 904.727] (II) NOUVEAU(0): 1024x768@75Hz [ 904.727] (II) NOUVEAU(0): 1280x1024@75Hz [ 904.727] (II) NOUVEAU(0): 1152x864@75Hz [ 904.727] (II) NOUVEAU(0): Manufacturer's mask: 0 [ 904.727] (II) NOUVEAU(0): Supported standard timings: [ 904.727] (II) NOUVEAU(0): #0: hsize: 1680 vsize 1050 refresh: 60 vid: 179 [ 904.727] (II) NOUVEAU(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897 [ 904.727] (II) NOUVEAU(0): #2: hsize: 1280 vsize 960 refresh: 60 vid: 16513 [ 904.727] (II) NOUVEAU(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337 [ 904.727] (II) NOUVEAU(0): Supported detailed timing: [ 904.727] (II) NOUVEAU(0): clock: 138.5 MHz Image Size: 531 x 299 mm [ 904.727] (II) NOUVEAU(0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2080 h_border: 0 [ 904.727] (II) NOUVEAU(0): v_active: 1080 v_sync: 1083 v_sync_end 1088 v_blanking: 1111 v_border: 0 [ 904.727] (II) NOUVEAU(0): Supported detailed timing: [ 904.727] (II) NOUVEAU(0): clock: 148.5 MHz Image Size: 531 x 299 mm [ 904.727] (II) NOUVEAU(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0 [ 904.727] (II) NOUVEAU(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0 [ 904.727] (II) NOUVEAU(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 155 MHz [ 904.727] (II) NOUVEAU(0): Monitor name: W2486 [ 904.727] (II) NOUVEAU(0): EDID (in hex): [ 904.727] (II) NOUVEAU(0): 00ffffffffffff001e6d235763a60000 [ 904.727] (II) NOUVEAU(0): 0913010380351e78ea3f35a259559b25 [ 904.727] (II) NOUVEAU(0): 0e5054a76b80b30081808140714f0101 [ 904.727] (II) NOUVEAU(0): 0101010101011a3680a070381f403020 [ 904.727] (II) NOUVEAU(0): 3500132b2100001a023a801871382d40 [ 904.727] (II) NOUVEAU(0): 582c4500132b2100001e000000fd0038 [ 904.727] (II) NOUVEAU(0): 4b1e530f000a202020202020000000fc [ 904.727] (II) NOUVEAU(0): 0057323438360a20202020202020001e [ 904.727] (II) NOUVEAU(0): Printing probed modes for output DVI-I-1 [ 904.727] (II) NOUVEAU(0): Modeline "1920x1080"x59.9 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.6 kHz eP) [ 904.727] (II) NOUVEAU(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz e) [ 904.727] (II) NOUVEAU(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e) [ 904.727] (II) NOUVEAU(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e) [ 904.727] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e) [ 904.727] (II) NOUVEAU(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e) [ 904.727] (II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e) [ 904.727] (II) NOUVEAU(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e) [ 904.727] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 904.727] (II) NOUVEAU(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e) [ 904.727] (II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e) [ 904.727] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 904.727] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e) [ 904.727] (II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e) [ 904.727] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 904.727] (II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 904.794] (II) NOUVEAU(0): EDID for output HDMI-1 [ 904.794] (II) NOUVEAU(0): Manufacturer: GSM Model: 5729 Serial#: 42590 [ 904.794] (II) NOUVEAU(0): Year: 2009 Week: 9 [ 904.794] (II) NOUVEAU(0): EDID Version: 1.3 [ 904.794] (II) NOUVEAU(0): Digital Display Input [ 904.794] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 53 vert.: 30 [ 904.794] (II) NOUVEAU(0): Gamma: 2.20 [ 904.794] (II) NOUVEAU(0): No DPMS capabilities specified [ 904.794] (II) NOUVEAU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 [ 904.794] (II) NOUVEAU(0): First detailed timing is preferred mode [ 904.794] (II) NOUVEAU(0): redX: 0.633 redY: 0.351 greenX: 0.335 greenY: 0.608 [ 904.794] (II) NOUVEAU(0): blueX: 0.145 blueY: 0.058 whiteX: 0.313 whiteY: 0.329 [ 904.794] (II) NOUVEAU(0): Supported established timings: [ 904.794] (II) NOUVEAU(0): 640x480@60Hz [ 904.794] (II) NOUVEAU(0): 800x600@60Hz [ 904.794] (II) NOUVEAU(0): 1024x768@60Hz [ 904.794] (II) NOUVEAU(0): Manufacturer's mask: 0 [ 904.794] (II) NOUVEAU(0): Supported standard timings: [ 904.794] (II) NOUVEAU(0): #0: hsize: 1680 vsize 1050 refresh: 60 vid: 179 [ 904.794] (II) NOUVEAU(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897 [ 904.794] (II) NOUVEAU(0): #2: hsize: 1280 vsize 960 refresh: 60 vid: 16513 [ 904.794] (II) NOUVEAU(0): #3: hsize: 1152 vsize 864 refresh: 60 vid: 16497 [ 904.794] (II) NOUVEAU(0): Supported detailed timing: [ 904.794] (II) NOUVEAU(0): clock: 138.5 MHz Image Size: 531 x 299 mm [ 904.794] (II) NOUVEAU(0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2080 h_border: 0 [ 904.794] (II) NOUVEAU(0): v_active: 1080 v_sync: 1083 v_sync_end 1088 v_blanking: 1111 v_border: 0 [ 904.794] (II) NOUVEAU(0): Supported detailed timing: [ 904.794] (II) NOUVEAU(0): clock: 148.5 MHz Image Size: 531 x 299 mm [ 904.794] (II) NOUVEAU(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0 [ 904.794] (II) NOUVEAU(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0 [ 904.794] (II) NOUVEAU(0): Ranges: V min: 48 V max: 61 Hz, H min: 28 H max: 83 kHz, PixClock max 155 MHz [ 904.794] (II) NOUVEAU(0): Monitor name: W2486 [ 904.794] (II) NOUVEAU(0): Supported detailed timing: [ 904.794] (II) NOUVEAU(0): clock: 148.5 MHz Image Size: 531 x 299 mm [ 904.794] (II) NOUVEAU(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0 [ 904.794] (II) NOUVEAU(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0 [ 904.794] (II) NOUVEAU(0): Supported detailed timing: [ 904.794] (II) NOUVEAU(0): clock: 74.2 MHz Image Size: 531 x 299 mm [ 904.794] (II) NOUVEAU(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0 [ 904.794] (II) NOUVEAU(0): v_active: 540 v_sync: 542 v_sync_end 547 v_blanking: 562 v_border: 0 [ 904.794] (II) NOUVEAU(0): Supported detailed timing: [ 904.794] (II) NOUVEAU(0): clock: 74.2 MHz Image Size: 531 x 299 mm [ 904.794] (II) NOUVEAU(0): h_active: 1280 h_sync: 1390 h_sync_end 1430 h_blank_end 1650 h_border: 0 [ 904.794] (II) NOUVEAU(0): v_active: 720 v_sync: 725 v_sync_end 730 v_blanking: 750 v_border: 0 [ 904.794] (II) NOUVEAU(0): Supported detailed timing: [ 904.794] (II) NOUVEAU(0): clock: 27.0 MHz Image Size: 531 x 299 mm [ 904.794] (II) NOUVEAU(0): h_active: 720 h_sync: 736 h_sync_end 798 h_blank_end 858 h_border: 0 [ 904.794] (II) NOUVEAU(0): v_active: 480 v_sync: 489 v_sync_end 495 v_blanking: 525 v_border: 0 [ 904.794] (II) NOUVEAU(0): Number of EDID sections to follow: 1 [ 904.794] (II) NOUVEAU(0): EDID (in hex): [ 904.794] (II) NOUVEAU(0): 00ffffffffffff001e6d29575ea60000 [ 904.794] (II) NOUVEAU(0): 0913010380351e780a3f35a259559b25 [ 904.794] (II) NOUVEAU(0): 0e5054210800b3008180814071400101 [ 904.794] (II) NOUVEAU(0): 0101010101011a3680a070381f403020 [ 904.794] (II) NOUVEAU(0): 3500132b2100001a023a801871382d40 [ 904.794] (II) NOUVEAU(0): 582c4500132b2100001e000000fd0030 [ 904.794] (II) NOUVEAU(0): 3d1c530f000a202020202020000000fc [ 904.794] (II) NOUVEAU(0): 0057323438360a20202020202020018c [ 904.794] (II) NOUVEAU(0): 020321f14e900403011412051f101300 [ 904.794] (II) NOUVEAU(0): 000000230907078301000065030c0010 [ 904.794] (II) NOUVEAU(0): 00023a801871382d40582c4500132b21 [ 904.794] (II) NOUVEAU(0): 00001e011d8018711c1620582c250013 [ 904.794] (II) NOUVEAU(0): 2b2100009e011d007251d01e206e2855 [ 904.794] (II) NOUVEAU(0): 00132b2100001e8c0ad08a20e02d1010 [ 904.794] (II) NOUVEAU(0): 3e9600132b2100001800000000000000 [ 904.794] (II) NOUVEAU(0): 00000000000000000000000000000026 [ 904.794] (II) NOUVEAU(0): Printing probed modes for output HDMI-1 [ 904.794] (II) NOUVEAU(0): Modeline "1920x1080"x59.9 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.6 kHz eP) [ 904.794] (II) NOUVEAU(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz e) [ 904.794] (II) NOUVEAU(0): Modeline "1920x1080"x50.0 148.50 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (56.2 kHz e) [ 904.794] (II) NOUVEAU(0): Modeline "1920x1080"x59.9 148.35 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.4 kHz e) [ 904.794] (II) NOUVEAU(0): Modeline "1920x1080i"x60.0 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e) [ 904.794] (II) NOUVEAU(0): Modeline "1920x1080i"x50.0 74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e) [ 904.794] (II) NOUVEAU(0): Modeline "1920x1080i"x59.9 74.18 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.7 kHz e) [ 904.794] (II) NOUVEAU(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e) [ 904.794] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e) [ 904.794] (II) NOUVEAU(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e) [ 904.794] (II) NOUVEAU(0): Modeline "1152x864"x60.0 81.58 1152 1216 1336 1520 864 865 868 895 -hsync +vsync (53.7 kHz) [ 904.794] (II) NOUVEAU(0): Modeline "1280x720"x60.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e) [ 904.794] (II) NOUVEAU(0): Modeline "1280x720"x50.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e) [ 904.794] (II) NOUVEAU(0): Modeline "1280x720"x59.9 74.18 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e) [ 904.794] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 904.794] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 904.794] (II) NOUVEAU(0): Modeline "720x576"x50.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e) [ 904.794] (II) NOUVEAU(0): Modeline "720x480"x60.0 27.03 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e) [ 904.794] (II) NOUVEAU(0): Modeline "720x480"x59.9 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e) [ 904.794] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 904.794] (II) NOUVEAU(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 904.817] (II) NOUVEAU(0): EDID for output VGA-1 [ 904.817] (II) NOUVEAU(0): Output DVI-I-1 connected [ 904.817] (II) NOUVEAU(0): Output HDMI-1 connected [ 904.817] (II) NOUVEAU(0): Output VGA-1 disconnected [ 904.817] (II) NOUVEAU(0): Using exact sizes for initial modes [ 904.817] (II) NOUVEAU(0): Output DVI-I-1 using initial mode 1920x1080 [ 904.817] (II) NOUVEAU(0): Output HDMI-1 using initial mode 1920x1080 [ 904.817] (II) NOUVEAU(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated. [ 904.817] (--) NOUVEAU(0): Virtual size is 1920x1080 (pitch 0) [ 904.817] (**) NOUVEAU(0): Driver mode "1920x1080": 138.5 MHz (scaled from 0.0 MHz), 66.6 kHz, 59.9 Hz [ 904.817] (II) NOUVEAU(0): Modeline "1920x1080"x59.9 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.6 kHz eP) [ 904.818] (**) NOUVEAU(0): Driver mode "1920x1080": 148.5 MHz (scaled from 0.0 MHz), 67.5 kHz, 60.0 Hz [ 904.818] (II) NOUVEAU(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz e) [ 904.818] (**) NOUVEAU(0): Driver mode "1680x1050": 119.0 MHz (scaled from 0.0 MHz), 64.7 kHz, 59.9 Hz [ 904.818] (II) NOUVEAU(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e) [ 904.818] (**) NOUVEAU(0): Driver mode "1280x1024": 135.0 MHz (scaled from 0.0 MHz), 80.0 kHz, 75.0 Hz [ 904.818] (II) NOUVEAU(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e) [ 904.818] (**) NOUVEAU(0): Driver mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz [ 904.818] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e) [ 904.818] (**) NOUVEAU(0): Driver mode "1280x960": 108.0 MHz (scaled from 0.0 MHz), 60.0 kHz, 60.0 Hz [ 904.818] (II) NOUVEAU(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e) [ 904.818] (**) NOUVEAU(0): Driver mode "1152x864": 108.0 MHz (scaled from 0.0 MHz), 67.5 kHz, 75.0 Hz [ 904.818] (II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e) [ 904.818] (**) NOUVEAU(0): Driver mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.1 kHz, 75.1 Hz [ 904.818] (II) NOUVEAU(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e) [ 904.818] (**) NOUVEAU(0): Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz [ 904.818] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 904.818] (**) NOUVEAU(0): Driver mode "832x624": 57.3 MHz (scaled from 0.0 MHz), 49.7 kHz, 74.6 Hz [ 904.818] (II) NOUVEAU(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e) [ 904.818] (**) NOUVEAU(0): Driver mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz [ 904.818] (II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e) [ 904.818] (**) NOUVEAU(0): Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz [ 904.818] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 904.818] (**) NOUVEAU(0): Driver mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.2 Hz [ 904.818] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e) [ 904.818] (**) NOUVEAU(0): Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz [ 904.818] (II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e) [ 904.818] (**) NOUVEAU(0): Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz [ 904.818] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 904.818] (**) NOUVEAU(0): Driver mode "720x400": 28.3 MHz (scaled from 0.0 MHz), 31.5 kHz, 70.1 Hz [ 904.818] (II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 904.818] (==) NOUVEAU(0): DPI set to (96, 96) [ 904.818] (II) Loading sub module "fb" [ 904.818] (II) LoadModule: "fb" [ 904.818] (II) Loading /usr/lib64/xorg/modules/libfb.so [ 904.821] (II) Module fb: vendor="X.Org Foundation" [ 904.821] compiled for 1.16.2.901, module version = 1.0.0 [ 904.821] ABI class: X.Org ANSI C Emulation, version 0.4 [ 904.821] (II) Loading sub module "shadowfb" [ 904.821] (II) LoadModule: "shadowfb" [ 904.821] (II) Loading /usr/lib64/xorg/modules/libshadowfb.so [ 904.821] (II) Module shadowfb: vendor="X.Org Foundation" [ 904.821] compiled for 1.16.2.901, module version = 1.0.0 [ 904.821] ABI class: X.Org ANSI C Emulation, version 0.4 [ 904.821] (II) UnloadModule: "nv" [ 904.821] (II) Unloading nv [ 904.821] (II) UnloadModule: "fbdev" [ 904.821] (II) Unloading fbdev [ 904.821] (II) UnloadSubModule: "fbdevhw" [ 904.821] (II) Unloading fbdevhw [ 904.821] (II) UnloadModule: "vesa" [ 904.821] (II) Unloading vesa [ 904.821] (--) Depth 24 pixmap format is 32 bpp [ 904.825] (II) NOUVEAU(0): Channel setup complete. [ 904.826] (II) NOUVEAU(0): [COPY] async initialised. [ 904.826] (II) NOUVEAU(0): [DRI2] Setup complete [ 904.826] (II) NOUVEAU(0): [DRI2] DRI driver: nouveau [ 904.826] (II) NOUVEAU(0): [DRI2] VDPAU driver: nouveau [ 904.826] (II) Loading sub module "exa" [ 904.826] (II) LoadModule: "exa" [ 904.826] (II) Loading /usr/lib64/xorg/modules/libexa.so [ 904.826] (II) Module exa: vendor="X.Org Foundation" [ 904.826] compiled for 1.16.2.901, module version = 2.6.0 [ 904.826] ABI class: X.Org Video Driver, version 18.0 [ 904.826] (II) EXA(0): Driver allocated offscreen pixmaps [ 904.826] (II) EXA(0): Driver registered support for the following operations: [ 904.826] (II) Solid [ 904.826] (II) Copy [ 904.826] (II) Composite (RENDER acceleration) [ 904.826] (II) UploadToScreen [ 904.826] (II) DownloadFromScreen [ 904.826] (==) NOUVEAU(0): Backing store enabled [ 904.826] (==) NOUVEAU(0): Silken mouse enabled [ 904.826] (II) NOUVEAU(0): [XvMC] Associated with Nouveau GeForce 8/9 Textured Video. [ 904.826] (II) NOUVEAU(0): [XvMC] Extension initialized. [ 904.826] (==) NOUVEAU(0): DPMS enabled [ 904.826] (II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR disabled message. [ 904.828] (--) RandR disabled [ 904.837] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer [ 904.837] (II) AIGLX: enabled GLX_ARB_create_context [ 904.837] (II) AIGLX: enabled GLX_ARB_create_context_profile [ 904.837] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile [ 904.837] (II) AIGLX: enabled GLX_INTEL_swap_event [ 904.837] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control [ 904.837] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB [ 904.837] (II) AIGLX: enabled GLX_ARB_fbconfig_float [ 904.837] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects [ 904.838] (II) AIGLX: Loaded and initialized nouveau [ 904.838] (II) GLX: Initialized DRI2 GL provider for screen 0 [ 904.843] (II) NOUVEAU(0): NVEnterVT is called. [ 904.898] (II) NOUVEAU(0): Setting screen physical size to 508 x 285 [ 904.898] resize called 1920 1080 [ 904.948] (II) config/udev: Adding input device Power Button (/dev/input/event1) [ 904.948] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 904.948] (**) Power Button: Applying InputClass "system-keyboard" [ 904.948] (II) LoadModule: "evdev" [ 904.948] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so [ 904.951] (II) Module evdev: vendor="X.Org Foundation" [ 904.951] compiled for 1.16.2.901, module version = 2.9.1 [ 904.951] Module class: X.Org XInput Driver [ 904.951] ABI class: X.Org XInput driver, version 21.0 [ 904.951] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 15 paused 0 [ 904.951] (II) Using input driver 'evdev' for 'Power Button' [ 904.951] (**) Power Button: always reports core events [ 904.951] (**) evdev: Power Button: Device: "/dev/input/event1" [ 904.951] (--) evdev: Power Button: Vendor 0 Product 0x1 [ 904.951] (--) evdev: Power Button: Found keys [ 904.951] (II) evdev: Power Button: Configuring as keyboard [ 904.951] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1" [ 904.951] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6) [ 904.951] (**) Option "xkb_rules" "evdev" [ 904.951] (**) Option "xkb_model" "pc105" [ 904.951] (**) Option "xkb_layout" "de" [ 904.951] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 904.965] (II) config/udev: Adding input device Power Button (/dev/input/event0) [ 904.965] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 904.965] (**) Power Button: Applying InputClass "system-keyboard" [ 904.965] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 16 paused 0 [ 904.965] (II) Using input driver 'evdev' for 'Power Button' [ 904.965] (**) Power Button: always reports core events [ 904.965] (**) evdev: Power Button: Device: "/dev/input/event0" [ 904.965] (--) evdev: Power Button: Vendor 0 Product 0x1 [ 904.965] (--) evdev: Power Button: Found keys [ 904.965] (II) evdev: Power Button: Configuring as keyboard [ 904.965] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0" [ 904.965] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7) [ 904.965] (**) Option "xkb_rules" "evdev" [ 904.965] (**) Option "xkb_model" "pc105" [ 904.965] (**) Option "xkb_layout" "de" [ 904.965] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 904.966] (II) config/udev: Adding input device HDA NVidia HDMI (/dev/input/event9) [ 904.966] (II) No input driver specified, ignoring this device. [ 904.966] (II) This device may have been added with another device file. [ 904.966] (II) config/udev: Adding input device HDA Intel PCH Speaker Side (/dev/input/event7) [ 904.966] (II) No input driver specified, ignoring this device. [ 904.966] (II) This device may have been added with another device file. [ 904.966] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event8) [ 904.966] (II) No input driver specified, ignoring this device. [ 904.966] (II) This device may have been added with another device file. [ 904.966] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event2) [ 904.966] (II) No input driver specified, ignoring this device. [ 904.966] (II) This device may have been added with another device file. [ 904.966] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event3) [ 904.966] (II) No input driver specified, ignoring this device. [ 904.966] (II) This device may have been added with another device file. [ 904.967] (II) config/udev: Adding input device HDA Intel PCH Speaker Front (/dev/input/event4) [ 904.967] (II) No input driver specified, ignoring this device. [ 904.967] (II) This device may have been added with another device file. [ 904.967] (II) config/udev: Adding input device HDA Intel PCH Speaker Surround (/dev/input/event5) [ 904.967] (II) No input driver specified, ignoring this device. [ 904.967] (II) This device may have been added with another device file. [ 904.967] (II) config/udev: Adding input device HDA Intel PCH Speaker CLFE (/dev/input/event6) [ 904.967] (II) No input driver specified, ignoring this device. [ 904.967] (II) This device may have been added with another device file. [ 904.967] (II) config/udev: Adding input device Lite-On Technology USB Productivity Option Keyboard( has the hub in # 1 ) (/dev/input/event10) [ 904.967] (**) Lite-On Technology USB Productivity Option Keyboard( has the hub in # 1 ): Applying InputClass "evdev keyboard catchall" [ 904.967] (**) Lite-On Technology USB Productivity Option Keyboard( has the hub in # 1 ): Applying InputClass "system-keyboard" [ 904.967] (II) systemd-logind: got fd for /dev/input/event10 13:74 fd 17 paused 0 [ 904.967] (II) Using input driver 'evdev' for 'Lite-On Technology USB Productivity Option Keyboard( has the hub in # 1 )' [ 904.967] (**) Lite-On Technology USB Productivity Option Keyboard( has the hub in # 1 ): always reports core events [ 904.967] (**) evdev: Lite-On Technology USB Productivity Option Keyboard( has the hub in # 1 ): Device: "/dev/input/event10" [ 904.968] (--) evdev: Lite-On Technology USB Productivity Option Keyboard( has the hub in # 1 ): Vendor 0x4b3 Product 0x301b [ 904.968] (--) evdev: Lite-On Technology USB Productivity Option Keyboard( has the hub in # 1 ): Found keys [ 904.968] (II) evdev: Lite-On Technology USB Productivity Option Keyboard( has the hub in # 1 ): Configuring as keyboard [ 904.968] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.2/4-1.2.1/4-1.2.1:1.0/0003:04B3:301B.0001/input/input13/event10" [ 904.968] (II) XINPUT: Adding extended input device "Lite-On Technology USB Productivity Option Keyboard( has the hub in # 1 )" (type: KEYBOARD, id 8) [ 904.968] (**) Option "xkb_rules" "evdev" [ 904.968] (**) Option "xkb_model" "pc105" [ 904.968] (**) Option "xkb_layout" "de" [ 904.968] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 904.968] (II) config/udev: Adding input device Lite-On Technology USB Productivity Option Keyboard( has the hub in # 1 ) (/dev/input/event11) [ 904.968] (**) Lite-On Technology USB Productivity Option Keyboard( has the hub in # 1 ): Applying InputClass "evdev keyboard catchall" [ 904.968] (**) Lite-On Technology USB Productivity Option Keyboard( has the hub in # 1 ): Applying InputClass "system-keyboard" [ 904.968] (II) systemd-logind: got fd for /dev/input/event11 13:75 fd 18 paused 0 [ 904.968] (II) Using input driver 'evdev' for 'Lite-On Technology USB Productivity Option Keyboard( has the hub in # 1 )' [ 904.968] (**) Lite-On Technology USB Productivity Option Keyboard( has the hub in # 1 ): always reports core events [ 904.968] (**) evdev: Lite-On Technology USB Productivity Option Keyboard( has the hub in # 1 ): Device: "/dev/input/event11" [ 904.968] (--) evdev: Lite-On Technology USB Productivity Option Keyboard( has the hub in # 1 ): Vendor 0x4b3 Product 0x301b [ 904.968] (--) evdev: Lite-On Technology USB Productivity Option Keyboard( has the hub in # 1 ): Found keys [ 904.968] (II) evdev: Lite-On Technology USB Productivity Option Keyboard( has the hub in # 1 ): Configuring as keyboard [ 904.968] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.2/4-1.2.1/4-1.2.1:1.1/0003:04B3:301B.0002/input/input14/event11" [ 904.968] (II) XINPUT: Adding extended input device "Lite-On Technology USB Productivity Option Keyboard( has the hub in # 1 )" (type: KEYBOARD, id 9) [ 904.968] (**) Option "xkb_rules" "evdev" [ 904.968] (**) Option "xkb_model" "pc105" [ 904.968] (**) Option "xkb_layout" "de" [ 904.968] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 904.969] (II) config/udev: Adding input device Microsoft Comfort Mouse 3000 (/dev/input/event12) [ 904.969] (**) Microsoft Comfort Mouse 3000: Applying InputClass "evdev pointer catchall" [ 904.969] (**) Microsoft Comfort Mouse 3000: Applying InputClass "evdev keyboard catchall" [ 904.969] (**) Microsoft Comfort Mouse 3000: Applying InputClass "system-keyboard" [ 904.969] (II) systemd-logind: got fd for /dev/input/event12 13:76 fd 19 paused 0 [ 904.969] (II) Using input driver 'evdev' for 'Microsoft Comfort Mouse 3000' [ 904.969] (**) Microsoft Comfort Mouse 3000: always reports core events [ 904.969] (**) evdev: Microsoft Comfort Mouse 3000: Device: "/dev/input/event12" [ 904.969] (--) evdev: Microsoft Comfort Mouse 3000: Vendor 0x45e Product 0x77b [ 904.969] (--) evdev: Microsoft Comfort Mouse 3000: Found 9 mouse buttons [ 904.969] (--) evdev: Microsoft Comfort Mouse 3000: Found scroll wheel(s) [ 904.969] (--) evdev: Microsoft Comfort Mouse 3000: Found relative axes [ 904.969] (--) evdev: Microsoft Comfort Mouse 3000: Found x and y relative axes [ 904.969] (--) evdev: Microsoft Comfort Mouse 3000: Found absolute axes [ 904.969] (II) evdev: Microsoft Comfort Mouse 3000: Forcing absolute x/y axes to exist. [ 904.969] (--) evdev: Microsoft Comfort Mouse 3000: Found keys [ 904.969] (II) evdev: Microsoft Comfort Mouse 3000: Configuring as mouse [ 904.969] (II) evdev: Microsoft Comfort Mouse 3000: Configuring as keyboard [ 904.969] (II) evdev: Microsoft Comfort Mouse 3000: Adding scrollwheel support [ 904.969] (**) evdev: Microsoft Comfort Mouse 3000: YAxisMapping: buttons 4 and 5 [ 904.969] (**) evdev: Microsoft Comfort Mouse 3000: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 904.969] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.2/4-1.2.3/4-1.2.3:1.0/0003:045E:077B.0003/input/input15/event12" [ 904.969] (II) XINPUT: Adding extended input device "Microsoft Comfort Mouse 3000" (type: KEYBOARD, id 10) [ 904.969] (**) Option "xkb_rules" "evdev" [ 904.969] (**) Option "xkb_model" "pc105" [ 904.969] (**) Option "xkb_layout" "de" [ 904.969] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 904.969] (II) evdev: Microsoft Comfort Mouse 3000: initialized for relative axes. [ 904.969] (WW) evdev: Microsoft Comfort Mouse 3000: ignoring absolute axes. [ 904.969] (**) Microsoft Comfort Mouse 3000: (accel) keeping acceleration scheme 1 [ 904.969] (**) Microsoft Comfort Mouse 3000: (accel) acceleration profile 0 [ 904.969] (**) Microsoft Comfort Mouse 3000: (accel) acceleration factor: 2.000 [ 904.969] (**) Microsoft Comfort Mouse 3000: (accel) acceleration threshold: 4 [ 904.969] (II) config/udev: Adding input device Microsoft Comfort Mouse 3000 (/dev/input/mouse0) [ 904.969] (**) Microsoft Comfort Mouse 3000: Applying InputClass "system-keyboard" [ 904.969] (II) No input driver specified, ignoring this device. [ 904.969] (II) This device may have been added with another device file. [ 904.969] (II) config/udev: Adding input device PC Speaker (/dev/input/event13) [ 904.969] (II) No input driver specified, ignoring this device. [ 904.969] (II) This device may have been added with another device file. [ 904.975] (II) evdev: Microsoft Comfort Mouse 3000: Close [ 904.975] (II) UnloadModule: "evdev" [ 904.975] (II) systemd-logind: releasing fd for 13:76 [ 904.991] (II) evdev: Lite-On Technology USB Productivity Option Keyboard( has the hub in # 1 ): Close [ 904.991] (II) UnloadModule: "evdev" [ 904.991] (II) systemd-logind: releasing fd for 13:75 [ 905.002] (II) evdev: Lite-On Technology USB Productivity Option Keyboard( has the hub in # 1 ): Close [ 905.003] (II) UnloadModule: "evdev" [ 905.003] (II) systemd-logind: releasing fd for 13:74 [ 905.015] (II) evdev: Power Button: Close [ 905.015] (II) UnloadModule: "evdev" [ 905.015] (II) systemd-logind: releasing fd for 13:64 [ 905.021] (II) evdev: Power Button: Close [ 905.021] (II) UnloadModule: "evdev" [ 905.021] (II) systemd-logind: releasing fd for 13:65 [ 905.040] (II) NOUVEAU(0): NVLeaveVT is called. [ 905.247] (EE) Server terminated successfully (0). Closing log file.
