Very interesting suggestion. I may try that. Dan
On Thu, May 27, 2010 at 6:29 PM, needling around <ptf2...@bellsouth.net> wrote: > Hi, > In general seaweed is thermodynamically very 'cold' and therefore hard to > digest. One way to obtain the minerals is to make a seaweed 'soup' by > letting it simmer in a kettle of water for awhile and the straining and > pouring the 'soup' into a hot bath. Sit in the bath for at least 1/2 hour. > It works very well. If you cannot do the body bath you can do a foot bath > but do it more often. > > Don't throw out the seaweed it can be reboiled a couple of times. You can > even blend it after the second boil and then strain it. > PT > > > ----- Original Message ----- From: "Dan Nave" <bhangcha...@gmail.com> > To: <silver-list@eskimo.com> > Sent: Thursday, May 27, 2010 10:54 AM > Subject: Re: CS>Electrolyte ratios and amounts > > > Tom, > > Brooks Bradley has intimated that when supplementing minerals one > could end up by unbalancing the minerals in the body and recommended > taking large doses of kelp as a balanced supplement. Since I have > found that taking kelp gives me adverse side effects by way of my > intestinal system... I wanted to find a way to supplement the minerals > in another way. > > My intent was to get a balanced amount of the various mineral elements. > > Dan > > On Wed, May 26, 2010 at 10:31 PM, poast <po...@prodigy.net> wrote: >> >> Hello Dan, >> >> While I don't know the exact ratio of the various electrolytes to use, I >> would suggest using a conductivity meter to adjust amounts. Pick up some >> "mineral" water and measure its conductivity. Then add your electrolytes >> and try to come close to matching the conductivity of the "mineral" water. >> >> My son was wanting to drink purified water. We started with distilled >> water >> and simply added some sea salt to it. I adjusted the amount to match the >> conductivity of our tap water. While sea salt has some electrolyte >> properties, I think you are looking for something a little stronger. >> However you should get the idea behind this. >> >> Tom >> >> >> >> >> ----- Original Message ----- >> From: "Dan Nave" <bhangcha...@gmail.com> >> To: <silver-list@eskimo.com> >> Sent: Wednesday, May 26, 2010 10:00 AM >> Subject: CS>Electrolyte ratios and amounts >> >> >>> If one was to mix up a balanced set of electrolytes to add to >>> distilled water for drinking and cooking uses containing, perhaps, >>> bicarbonate of soda, magnesium chloride, and potassium chloride, what >>> ratios would one use, and how much total, say, per gallon? >>> >>> Any thoughts? >>> >>> Dan >>> >>> >>> -- >>> The Silver List is a moderated forum for discussing Colloidal Silver. >>> Rules and Instructions: http://www.silverlist.org >>> >>> Unsubscribe: >>> <mailto:silver-list-requ...@eskimo.com?subject=unsubscribe> >>> Archives: >>> http://www.mail-archive.com/silver-list@eskimo.com/maillist.html >>> >>> Off-Topic discussions: <mailto:silver-off-topic-l...@eskimo.com> >>> List Owner: Mike Devour <mailto:mdev...@eskimo.com> >>> >> >> > >
