An 'lsmod' on the client you're trying to image (within BOEL) should list the
module for the SCSI/SATA controller if it's recognized.
Check the disk controller in the HP machine you are trying to image. If the
Autoinstall CD does not contain a kernel module for the actual hardware present
in the machine, disk enumeration won't happen as expected by the Master script.
The device identified therein will not be recognized, and cannot be formatted.
If you have built the client image on one of these blades, be sure that the
modules are loaded. You may need to copy the module into the 'my_modules'
directory in the initd_template directory and add a line in INSMOD_COMMANDS.
Checking /proc/diskstats and /proc/partitions should yield some additional
clues as well. If the device is recognized, it will be present here as sda.
If this is the case, check the .master script and autoinstall.conf and be sure
that it is referencing the correct device.
I may not be entirely correct, but I hope this helps.
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Sisuite-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/sisuite-users
