I had this problem too, the solution was to pass '--flavor IMAGENAME' to si_mkclientnetboot on the server to grab the kernel and initrd produced by si_prepareclient on the GC.
Check the logs for your tftp server to see if it's sending 'standard/ kernel' instead of 'IMG/kernel' (among other things). Good luck On Jun 17, 2008, at 9:25 PM, Don Porter wrote: > Hi, > > I am trying to get systemimager to image a client machine with an > Intel 82566DM-2 gigabit ethernet card. As far as I can tell, it is > not recognizing the card after tftpboot, as it is trying to get a dhcp > address over the loopback device. This is not terribly surprising, as > it is only properly supported in newer kernels. > > I followed the instructions on the quickstart page, and I tried using > the --my-modules option to si_prepareclient to load the drivers off of > the running kernel. All attempts have failed. > > This is on an x86 host, running a 32-bit kernel (Ubuntu 7.10), and > version 4.0.2 of the systemimager tools. > > Any advice is greatly appreciated. > > Best regards, > Don Porter > > ------------------------------------------------------------------------- > Check out the new SourceForge.net Marketplace. > It's the best place to buy or sell services for > just about anything Open Source. > http://sourceforge.net/services/buy/index.php > _______________________________________________ > sisuite-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/sisuite-users ------------------------------------------------------------------------- Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://sourceforge.net/services/buy/index.php _______________________________________________ sisuite-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/sisuite-users
