Hi Bernard,
According to the code, that message just means it is going to try to
DHCP the host:
http://trac.systemimager.org/browser/branches/4.2.x/initrd_source/skel/etc/init.d/functions#L968
And it looks like it is trying to, but failed.
Is dhcpd running on your server (did you run si_mkbootserver)?
yes I did
Did SystemImager correctly identify your nic and is using the correct
one to DHCP? Any reason why you're using a bridge interface (br0) as
opposed to standard ethernet interface?
I think SI doesn't identify correctly the nice since it fails back to
something like socket fallback and
after there's DHCPDISCOVERY lo port 67 interval xx
I tried also eth0 with same result.
weird since the nic (intel 1000e) are the same of the previous node I installed
BTW, this is a quick start guide on how to use SystemImager:
http://wiki.systemimager.org/index.php/Quick_Start_HOWTO
Ok thanks I check it again now
Cheers,
Bernard
Thank you Bernard
PS: is there any cheatcode if I answer right to the monty python question ? ;)
On Thu, Apr 28, 2011 at 10:07 AM, E-Blokos <[email protected]> wrote:
> Hi Bernard,
>
> yesterday (all the night) I tried to install a new node
> at the data center, but I stucked with "ip address not set in pre-boot
> settings"
> weird since I did this commands .
>
> on golden client .
> si_prepareclient --server node250 --my-modules
>
> on server :
> si_getimage --golden-client node132 --update-script YES --image my_image
> --listing --autodetect-disks --ip-assignment static --post-install reboot
>
> and
>
> si_mkclientnetboot --verbose --netboot --clients "10.10.10.140-10.10.10.158"
> --flavor my_image --append "DEVICE=br0 IMAGESERVER=10.10.10.138
> GATEWAY=10.10.10.138 IMAGENAME=my_image"
>
>
> I tried also
>
> si_mkclientnetboot --verbose --netboot --clients "node140" --flavor my_image
> --append "DEVICE=br0 IMAGESERVER=10.10.10.138 GATEWAY=10.10.10.138
> IMAGENAME=my_image"
>
> si_mkclientnetboot --verbose --netboot --clients "node140" --flavor my_image
> --append "DEVICE=br0 IMAGESERVER=10.10.10.138 GATEWAY=10.10.10.138
> IMAGENAME=my_image"
>
>
> I have this in my dhcpd.conf
>
> subnet 10.10.10.128 netmask 255.255.255.224 {
> range 10.10.10.140 10.10.10.158;
> option domain-name "e-blokos.com";
> option routers 10.10.10.138;
> }
> host node140 {
> fixed-address 10.10.10.140;
> filename "pxelinux.0";
> next-server 10.10.10.138;
> }
> but the installer stops also at "ip address not set in pre-boot settings"
> the installer shows also
> dhclient....
> ....
> DHCPDISCOVER port 67 interval 9 etc.... several times and it stops.
>
> the mobo is intel S5000PAL with xeon quadcore and 2 network ports.
>
>
> Thanks for your help
>
> Franck
>
>
>
>
>
>
> ------------------------------------------------------------------------------
> WhatsUp Gold - Download Free Network Management Software
> The most intuitive, comprehensive, and cost-effective network
> management toolset available today. Delivers lowest initial
> acquisition cost and overall TCO of any competing solution.
> http://p.sf.net/sfu/whatsupgold-sd
> _______________________________________________
> sisuite-users mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/sisuite-users
>
>
------------------------------------------------------------------------------
WhatsUp Gold - Download Free Network Management Software
The most intuitive, comprehensive, and cost-effective network
management toolset available today. Delivers lowest initial
acquisition cost and overall TCO of any competing solution.
http://p.sf.net/sfu/whatsupgold-sd
_______________________________________________
sisuite-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/sisuite-users------------------------------------------------------------------------------
WhatsUp Gold - Download Free Network Management Software
The most intuitive, comprehensive, and cost-effective network
management toolset available today. Delivers lowest initial
acquisition cost and overall TCO of any competing solution.
http://p.sf.net/sfu/whatsupgold-sd
_______________________________________________
sisuite-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/sisuite-users
