Thanks, I got it to work just by installing the RPM on the master node. Since
Master/Slave nodes are all the same it compiled correctly this time. Now I have
one more issue I'm trying to understand. The client connects and starts
building. It originally had an issue connecting with RSYNC so I added a
statement to allow 192.168.3.0/255.255.255.0 to rsyncd. Well, that statement
let the install script format the drives and such and then it comes up again
with the access denied. Is there another location where I should put the allow
192.168.3.0/255.255.255.0? I think if I figure that out I'm done!
Andy
> On July 14, 2014 at 6:03 AM Pierre BLONDEAU <[email protected]>
> wrote:
>
>
> Hi,
>
> Yes, it's exactly what i try to say.
>
> On one cloned client or on the golden client ( or master node if you
> prefer ) but not image, you install the official driver.
>
> For exemple :
> cd /usr/src/
> wget ....
> unzip bnx2.zip -d bnx2
> cd bnx2/Server/Linux/Driver
> tar zxvf netxtreme2-5.2.55.tar.gz
> cd netxtreme2-5.2.55
> make
> make install
>
> You add the module to the UYOK file :
> echo "bnx2" >> /etc/systemimager/UYOK.modules_to_include
>
> And you regenerate a new initrd with the new driver:
> LC_ALL=C si_prepareclient --server your.systemimager.server.com
> --no-rsyncd --my-modules
>
> This command is for 4.0.2. If i good remember, it's little change in 4.3 .
>
> And you can copy file in /etc/systemimager/boot/* in your tftboot.
>
> Remark, it's not necessary to install the driver in "dkms" mode, because
> when your clone machines restart after the installation of the image,
> the kernel kernel can use the driver in "firmware mode" because your
> complete system have it.
>
> Regards
>
> Le 13/07/2014 06:05, [email protected] a écrit :
> > Thanks for the reply! I guess I'm not understanding what you meant. I have a
> > master node (dell01) with CentOS 6.5. This is where I run SI and the UYOK
> > script to generate the initrd/kernel files. Are you saying I should install
> > the "official" network card driver from Broadcom on the master node, create
> > the initrd/kernel and then try imaging on my slave node?
> >
> > Thanks again and you can send to my email if you like also
> >
> > Andy
> >
> >
> >
> >
> > Hi,
> >
> > We have solve this problem by install bnx2 module from the source of
> > broadcrom. The broadcom version works like others modules and not like a
> > "firmware" so it's included with UYOK.
> >
> > Regards
> >
> > Le 12/07/2014 07:02, Andy a écrit :
> >> Hi,
> >>
> >> I'm having issues with SI and using the UYOK feature. It seems to build
> >> the kernel without issue but the network card can't load the firmware.
> >> During the image loading on by slave node I get
> >>
> >> bnx2: Can't load firmware file "bnx2/bnx2-mips-06-6.2.3.fw
> >>
> >> Since it can't find that then in can't grab and IP and the rest fails.
> >>
> >> I'm using systemimager 4.3.0.17
> >>
> >> When I create the initrd/kernel it seems to work. It creates the
> >> /tmp/.systemimage.0 folder and copies all files needed (including the
> >> firmware tree) to it.
> >>
> >> I run:
> >>
> >> si_prepareclient --server dell01 --include-system-firmware and once
> >> that's complete I copy the initrd and kernel to /tftpboot as the
> >> official names that are pulled up through PXE.
> >>
> >>
> >>
> >>
> >>
> >> ------------------------------------------------------------------------
> >> <http://www.avast.com/> <http://www.avast.com/%3E>;
> >>
> >> This email is free from viruses and malware because avast! Antivirus
> >> <http://www.avast.com/> <http://www.avast.com/%3E>; protection is active.
> >>
> >>
> >>
> >>
> >> ------------------------------------------------------------------------------
> >>
> >>
> >>
> >> _______________________________________________
> >> sisuite-users mailing list
> >> sisuite-users@...
> >>https://lists.sourceforge.net/lists/listinfo/sisuite-users
> >>
> >
> >
> > --
> >
> > ----------------------------------------------
> >
> >
> >
> > ------------------------------------------------------------------------------
> >
> >
> >
> > _______________________________________________
> > sisuite-users mailing list
> > [email protected]
> > https://lists.sourceforge.net/lists/listinfo/sisuite-users
> >
>
>
> --
> ----------------------------------------------
> Pierre BLONDEAU
> Administrateur Systèmes & réseaux
> Université de Caen
> Laboratoire GREYC, Département d'informatique
>
> tel : 02 31 56 75 42
> bureau : Campus 2, Science 3, 406
> ----------------------------------------------
>
> ------------------------------------------------------------------------------
> Want fast and easy access to all the code in your enterprise? Index and
> search up to 200,000 lines of code with a free copy of Black Duck®
> Code Sight™ - the same software that powers the world's largest code
> search on Ohloh, the Black Duck Open Hub! Try it now.
> http://p.sf.net/sfu/bds_______________________________________________
> sisuite-users mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/sisuite-users
------------------------------------------------------------------------------
Want fast and easy access to all the code in your enterprise? Index and
search up to 200,000 lines of code with a free copy of Black Duck®
Code Sight™ - the same software that powers the world's largest code
search on Ohloh, the Black Duck Open Hub! Try it now.
http://p.sf.net/sfu/bds
_______________________________________________
sisuite-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/sisuite-users
