Chris MacKenzie wrote:Ok, since the module loads and your tape drive
reacts, what do you have in /proc ?
Hi slugs,
here's what i have in /proc.
[root@joe /proc]# pwd
/proc
[root@joe /proc]# cd scsi
[root@joe scsi]# ls -la
total 0
dr-xr-xr-x 3 root root 0 Jun 3 12:36 ./
dr-xr-xr-x 64 root root 0 Jun 3 2000 ../
dr-xr-xr-x 2 root root 0 Jun 3 12:36 aha152x/
-rw-r--r-- 1 root root 0 Jun 3 12:36 scsi
[root@joe scsi]# cat scsi
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: SONY Model: SDT-9000 Rev: 0200
Type: Sequential-Access ANSI SCSI revision: 02
[root@joe scsi]#
[root@joe scsi]# cd aha152x/
[root@joe aha152x]# ls -la
total 0
dr-xr-xr-x 2 root root 0 Jun 3 12:36 ./
dr-xr-xr-x 3 root root 0 Jun 3 12:36 ../
-rw-r--r-- 1 root root 0 Jun 3 12:36 0
[root@joe aha152x]# cat 0
Adaptec 152x SCSI driver; $Revision: 1.7 $
ioports 0x0140 to 0x015f
interrupt 0x09
disconnection/reconnection enabled
parity checking enabled
synchronous transfers disabled
0 commands currently queued
enabled debugging options: (abort) (reset)
queue status:
no not yet issued commands
no current command
no disconnected commands
waiting: SCSISEQ (); SCSISIG (DATA OUT); INTSTAT (lo); SSTAT (SELINGO
BUSFREE PHASECHG ); SSTAT (); SXFRCTL0 (CH1 ); SIGNAL (); SELID (81),
SSTAT2 (SEMPTY ); SFCNT (0); SCSICNT (0), OFFCNT(0), SSTAT4 (); DMACNTRL0
(16BIT PIO READ INTEN ); DMASTAT (DFIFOEMP )
enabled interrupts ()
i suppose this looks good.
what next?
--
SLUG - Sydney Linux Users Group Mailing List - http://www.slug.org.au
To unsubscribe send email to [EMAIL PROTECTED] with
unsubscribe in the text
