hello I have a soft66adh I just purchased can you tell me if this could be used to recieve 530 to 1700 khz? I payed 125.00 dollars would even considder celling this one recieving am as well as drm is 2 of the things I have been wanting to do. can you also tell me what type of antenna jack yours takes? Hank ----- Original Message ----- From: "ni9n" <peg...@ieee.org> To: <soft_radio@yahoogroups.com> Sent: Saturday, January 23, 2010 8:08 AM Subject: [soft_radio] Re: LD-1 in production, ready to take orders.
> Yes, it sure can! One of the preselector filters is actually a lowpass > filter, so it'll probably work well even lower that 530 kHz, but it hasn't > been tested below the "standard" AM broadcast band. I use it to listen to > AM broadcast stations, and it works well. On the upper end, it works well > to at least 30 MHz, probably a bit higher, but the DDS only works up to > 37.5 MHz. > > Also, I'm offering it at an introductory price of $150 US for the next two > weeks, and I am now shipping units. > > --- In soft_radio@yahoogroups.com, "hank smith" <hanksmi...@...> wrote: >> >> can this recieve 530 to 1700 khz? >> what freq ranges can this recieve? >> ----- Original Message ----- >> From: "ni9n" <peg...@...> >> To: <soft_radio@yahoogroups.com> >> Sent: Thursday, January 21, 2010 7:05 PM >> Subject: [soft_radio] LD-1 in production, ready to take orders. >> >> >> > It's taken a bit longer than I expected back in November, but I have >> > three >> > units just about ready to ship (waiting on backordered parts that >> > should >> > come tomorrow) and two more will be completed within a couple of days. >> > When the first three are sold, I will order the parts for a second lot >> > of >> > five, and when those are sold ... well, you get the idea. For more >> > details, go to www.lazydogengineering.com/LD1home.htm. To order, go to >> > shop.lazydogengineering.com. >> > >> > There are several reasons for the delay. First, after reading the >> > comments I had received back in November I realized that I really >> > needed >> > to develop an ExtIO dll to integrate my control software with Winrad. >> > I >> > had a bit of a learning curve to climb, but that is now done. I also >> > had >> > to develop an installer package, and I added an external mute switch >> > option. The results are a really good software package that I intend >> > to >> > continue to improve. Check out the technical info, and if it looks >> > good >> > go ahead and place an order. I should be shipping units no later than >> > Monday. >> > >> > 73, >> > Pete, NI9N >> > >> > >> > >> > ------------------------------------ >> > >> > Yahoo! Groups Links >> > >> > >> > >> > > > > > ------------------------------------ > > Yahoo! Groups Links > > >