Hello,
you have to set the ping interval parameter:
http://kamailio.org/docs/modules/stable/modules_k/dispatcher.html#id2590104
I see that documentation says its default value is 10, but in sources is
0, which means this feature is disabled.
Cheers,
Daniel
On 9/7/10 7:05 PM, Klaus Darilion wrote:
Hi!
I have some problems with 3.0 dispatcher module:
module configuration:
# ----- dispatcher -----
/* enable failover support */
modparam("dispatcher", "flags", 2)
modparam("dispatcher", "dst_avp", "$avp(i:271)")
modparam("dispatcher", "grp_avp", "$avp(i:272)")
modparam("dispatcher", "cnt_avp", "$avp(i:273)")
If I understand correctly, then dispatcher should send OPTIONS once a
destination is in "probe" mode. But this never happens, e.g. if I set
"probe" mode manually, the destination is set to active again:
# kamctl fifo ds_list
SET_NO:: 1
SET:: 1
URI:: sip:gucci.labs.nic.at flag=A
URI:: sip:nvst.labs.nic.at flag=A
# kamctl fifo ds_set_state i 1 sip:gucci.labs.nic.at
# kamctl fifo ds_list
SET_NO:: 1
SET:: 1
URI:: sip:gucci.labs.nic.at flag=I
URI:: sip:nvst.labs.nic.at flag=A
# kamctl fifo ds_set_state p 1 sip:gucci.labs.nic.at
# kamctl fifo ds_list
SET_NO:: 1
SET:: 1
URI:: sip:gucci.labs.nic.at flag=A
URI:: sip:nvst.labs.nic.at flag=A
I also tried ds_probing_mode=1 which IIUC should send OPTIONS also to
active destinations to find out if the destination is alive. But I
never see any OPTIONS requests.
Is there something I am doing completely wrong?
thanks
Klaus
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla
http://www.asipto.com
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
