This is a note to let you know that I've just added the patch titled
USB: EHCI: Do not rely on PORT_SUSPEND to stop USB resuming in
ehci_bus_resume().
to the 2.6.32-longterm tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/longterm/longterm-queue-2.6.32.git;a=summary
The filename of the patch is:
usb-ehci-do-not-rely-on-port_suspend-to-stop-usb-resuming-in-ehci_bus_resume.patch
and it can be found in the queue-2.6.32 subdirectory.
If you, or anyone else, feels it should not be added to the 2.6.32 longterm
tree,
please let <sta...@kernel.org> know about it.
>From d0f2fb2500b1c5fe4967eb45d8c9bc758d7aef80 Mon Sep 17 00:00:00 2001
From: Wang Zhi <zhi.w...@windriver.com>
Date: Wed, 17 Aug 2011 10:39:31 +0800
Subject: USB: EHCI: Do not rely on PORT_SUSPEND to stop USB resuming in
ehci_bus_resume().
From: Wang Zhi <zhi.w...@windriver.com>
commit d0f2fb2500b1c5fe4967eb45d8c9bc758d7aef80 upstream.
>From EHCI Spec p.28 HC should clear PORT_SUSPEND when SW clears
PORT_RESUME. In Intel Oaktrail platform, MPH (Multi-Port Host
Controller) core clears PORT_SUSPEND directly when SW sets PORT_RESUME
bit. If we rely on PORT_SUSPEND bit to stop USB resume, we will miss
the action of clearing PORT_RESUME. This will cause unexpected long
resume signal on USB bus.
Signed-off-by: Wang Zhi <zhi.w...@windriver.com>
Signed-off-by: Alan Stern <st...@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gre...@suse.de>
---
drivers/usb/host/ehci-hub.c | 7 +++----
1 file changed, 3 insertions(+), 4 deletions(-)
--- a/drivers/usb/host/ehci-hub.c
+++ b/drivers/usb/host/ehci-hub.c
@@ -243,7 +243,7 @@ static int ehci_bus_resume (struct usb_h
u32 temp;
u32 power_okay;
int i;
- u8 resume_needed = 0;
+ unsigned long resume_needed = 0;
if (time_before (jiffies, ehci->next_statechange))
msleep(5);
@@ -307,7 +307,7 @@ static int ehci_bus_resume (struct usb_h
if (test_bit(i, &ehci->bus_suspended) &&
(temp & PORT_SUSPEND)) {
temp |= PORT_RESUME;
- resume_needed = 1;
+ set_bit(i, &resume_needed);
}
ehci_writel(ehci, temp, &ehci->regs->port_status [i]);
}
@@ -322,8 +322,7 @@ static int ehci_bus_resume (struct usb_h
i = HCS_N_PORTS (ehci->hcs_params);
while (i--) {
temp = ehci_readl(ehci, &ehci->regs->port_status [i]);
- if (test_bit(i, &ehci->bus_suspended) &&
- (temp & PORT_SUSPEND)) {
+ if (test_bit(i, &resume_needed)) {
temp &= ~(PORT_RWC_BITS | PORT_RESUME);
ehci_writel(ehci, temp, &ehci->regs->port_status [i]);
ehci_vdbg (ehci, "resumed port %d\n", i + 1);
Patches currently in longterm-queue-2.6.32 which might be from
zhi.w...@windriver.com are
/home/gregkh/linux/longterm/longterm-queue-2.6.32/queue-2.6.32/usb-ehci-do-not-rely-on-port_suspend-to-stop-usb-resuming-in-ehci_bus_resume.patch
_______________________________________________
stable mailing list
stable@linux.kernel.org
http://linux.kernel.org/mailman/listinfo/stable
