Sebastian, in most cases Exif_template.xml is all what you need to modify (if it is just static data), you will need to modify exif.php only if the data for the new field should be obtained from some other parts of the camera firmware (i.e. serial number).
And of course it is possible to add more dynamic fields - fields that are written to at run time. That will need more changes - in addition to template you'll need modify exifa.h headre file ( http://elphel.cvs.sourceforge.net/viewvc/elphel/elphel353-8.0/os/linux-2.6-tag--devboard-R2_10-4/include/asm-cris/elphel/exifa.h?view=markup) and add support elphel_php.c extension: http://elphel.cvs.sourceforge.net/viewvc/elphel/elphel353-8.0/apps/php-5.2.9/ext/elphel/elphel_php.c?view=markup The last It is not absolutely required, but it would be nice to have support for that field in PHP in the camera) And then your application will need to write formatted (as in Exif itself) data to a device driver (using the new defined tag for positioning in the file), that data will be attached to the current (and next ones until overwritten) frame camera is acquiring. You may look at GPS/compass application as an example. There is more on the matter in my older post: http://www.mail-archive.com/support-list@support.elphel.com/msg00281.html Andrey
_______________________________________________ Support-list mailing list Support-list@support.elphel.com http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com