Try using "192.168.3.20:/tmp/image/" instead of "192.168.3.20:/tmp/image/image353-8.0.9/"
Regards Sebastian On Wed, Nov 17, 2010 at 04:07, Ákos Maróy <a...@maroy.hu> wrote: > Hi, > > I'm having some issues with the firmware upgrade web interface of my > camera, which currently has firmware 8.0.8.48 > > when I go to the firmware upgrade web interface, and enter the NFS share > IP & directory there (in my case, > 192.168.3.20:/tmp/image/image353-8.0.9/ ), and press the 'Check NFS' > button, I get: > > > NFS connection validated > > Files: > kimage not found! > list not found! > MD5SUM not found! > nfs_flashitall not found! > nfs_update not found! > part0.img not found! > part1.img not found! > part2.img not found! > part3.img not found! > partitions. not found! > > > this is despite the fact that the files are there. checking manually > from the camera: > > # mount > rootfs on / type rootfs (rw) > /dev/root on / type jffs2 (ro) > /dev/part/rwfsblock on /mnt/flash type jffs2 (rw) > proc on /proc type proc (rw) > tmpfs on /var type tmpfs (rw) > sysfs on /sys type sysfs (rw) > devpts on /dev/pts type devpts (rw) > none on /proc/bus/usb type usbfs (rw) > 192.168.3.20:/tmp/image/image353-8.0.9/ on /var/tmp/nfs_test type nfs > (rw,vers=3,rsize=1048576,wsize=1048576,hard,nolock,proto=tcp,timeo=70,retrans=3,sec=sys,addr=192.168.3.20) > # ls /var/tmp/nfs_test/ | more > MD5SUM > kimage > list > nfs_flashitall > nfs_update > part0.img > part1.img > part2.img > part3.img > partitions.conf > > > > what is the easy way of flashing the camera, without the HTML UI magic, > but from command line? > > > Akos > > _______________________________________________ > Support-list mailing list > Support-list@support.elphel.com > http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com > _______________________________________________ Support-list mailing list Support-list@support.elphel.com http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
