Hi, http://<camera-ip> -> "Parameter Editor"
Scroll down to the 2nd table. - "Save" button - Optionally write some comment and press "Update" to the right of it. Next time the camera will boot with these settings. - To set the parameter group used at boot time, select it and press "Update Default" button. Camera's ip address is saved through http://<camera-ip> -> "System Preferences", but you already know this. On 25 November 2013 05:59, Manuel Christen <m...@schaeffer-ag.de> wrote: > > is there a possibility with the webinterface to backup/restore > the camera configuration? > > best regards > Manuel > > > -- > Manuel Christen Schaeffer AG > Nahmitzer Damm 32 Tel. +49-30-8058695-53 > 12277 Berlin Fax: +49-30-8058695-33 > http://www.schaeffer-ag.de > > HRB 93611 B, Amtsgericht Berlin Charlottenburg > Vorstand: Jörg Schaeffer, Kai Schaeffer > Aufsichtsrat: Dieter Kersten (Vorsitzender) > > > _______________________________________________ > Support-list mailing list > Support-list@support.elphel.com > http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com > > -- > Best regards, > Oleg Dzhimiev > Electronics Engineer > phone: +1 801 783 5555 x124 > Elphel, Inc. > <http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com>
_______________________________________________ Support-list mailing list Support-list@support.elphel.com http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
