Yakov, We only can help with the questions on the 393 FPGA as well as on the old 323. Or somewhat newer 353 - we have one 363 camera that uses a single 10353 board instead of a pair of 10313 ones.
But I do not know who can do the actual development for you. Andrey ---- On Wed, 20 Jul 2016 11:08:33 -0700 Yakov <queila...@gmail.com> wrote ---- Hello Andrey. How do you think who can write a firmware for 10393 to run older KAI11002 sensor boards from 323? Regards, Iakov(Yakov) Petrov. On Sun, Jul 3, 2016 at 8:07 AM, Yakov <queila...@gmail.com> wrote: > Ok. You can't develop software. Pity. I will try to find someone to > outsource software development. I just need software for one machine. > Global shutter and CCD's much much better. For book scanning. Why > global shutter. Because camera moving up and down. 1500 times in one > hour. Check Treventus. > CCD's because of the color. CMOS have issues with blue channel. > > Regards, > Iakov(Yakov) Petrov. > > On Sun, Jul 3, 2016 at 7:59 AM, support-list > <support-list@support.elphel.com> wrote: >> Yakov, >> >> we are too busy with the current projects so we only can help with some >> consultations, not do the actual design. >> >> And why do you think global shutter is better for book scanning? Rolling >> shutter ones provide better S/N for the same pixel size >> >> Andrey >> >> ---- On Sat, 02 Jul 2016 19:26:47 -0700 Yakov<queila...@gmail.com> wrote >> ---- >> >> Yeah. But these sensors are CCD and have global shutter. Ideal for >> book scanning in industrial scale. >> How much will be to write such a firmware for 10393? Do you have >> firmware for 10353? Maybe some other sensor boards can be developed >> based on 25MP CMOS global shutter sensors? >> >> Regards, >> Iakov(Yakov) Petrov. >> >> On Sun, Jul 3, 2016 at 7:21 AM, support-list >> <support-list@support.elphel.com> wrote: >>> Yakov, >>> >>> Just one will definitely be enough, but there is no code to run these >>> sensor >>> boards. And as these sensors are rather old it may be easier to just use >>> NC323 than to develop firmware fro the 393 to run these sensors. >>> >>> Andrey >>> >>> ---- On Sat, 02 Jul 2016 19:07:02 -0700 Yakov<queila...@gmail.com> wrote >>> ---- >>> >>> Hello Andrey. How many 10393 CPU boards I need to run 3 KAI11002 at >>> 4.8 fps at 30mhz? >>> >>> Regards, >>> Iakov(Yakov) Petrov. >>> >>> On Mon, Aug 24, 2015 at 11:24 PM, support-list >>> <support-list@support.elphel.com> wrote: >>>> Hello Yakov, >>>> >>>> The 10393 boards (main boards of the NC393 cameras) are >>>> hardware-compatible >>>> with the older sensor boards. The new system board has 4 identical ports >>>> each with the pinout compatible with 10313, 10333 and 10353 boards. The >>>> new >>>> camera will also support modern serial sensor interfaces, but the bakward >>>> compatibility will be 100% preserved - with the flexibility of FPGA it is >>>> not that difficult. >>>> >>>> I just finished simulation of the camera FPGA (comparing against 10353 >>>> with >>>> the same sensor data) and now I'm starting to test it on the actual >>>> hardware >>>> >>>> >>>> Andrey >>>> >>>> Hello. Will NC393 boards will be backward compatible with 323 hardware? >>>> >>>> Best regards, >>>> Yakov Petrov. >>>> >>> >>> _______________________________________________ >>> Support-list mailing list >>> Support-list@support.elphel.com >>> http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com >>> >>> >>> >> >> _______________________________________________ >> Support-list mailing list >> Support-list@support.elphel.com >> http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com >> >> >> _______________________________________________ Support-list mailing list Support-list@support.elphel.com http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
_______________________________________________ Support-list mailing list Support-list@support.elphel.com http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com