Hi, Currently we want to retreive the footage of our elphel NC393. When running the script "./int_ssd_download.py", we see the disk getting unmounted. But my thinkpad doesn't see the drive. Maybe it's been fixed in the later firmware but we like to get the data save first, before we upgrade the firmware. What could be the problem? The thinkpad notebook has an unpowered esata I believe, but I think the ssd is powered internally?
root@192.168.0.9: connection ok root@192.168.0.9: Enabled connection: internal SSD <-> Camera root@192.168.0.9: raw partition name: Crucial_CT250MX200SSD6_1531103B7285-part2 umounting /dev/sda1 root@192.168.0.9: Enabled connection: internal SSD <-> PC Connect camera (eSATA) to PC (eSATA/SATA). Press Enter to continue... Waiting for disks to show up: ['Crucial_CT250MX200SSD6_1531103B7285-part2'] Waiting for disks to show up: ['Crucial_CT250MX200SSD6_1531103B7285-part2'] PC: Error: Disks were not found: ['Crucial_CT250MX200SSD6_1531103B7285-part2'] From the elphel dmesg [ 586.941027] ata1: exception Emask 0x10 SAct 0x0 SErr 0x90000 action 0xe frozen [ 586.948183] ata1: irq_stat 0x00400000, PHY RDY changed [ 586.953342] ata1: SError: { PHYRdyChg 10B8B } [ 586.957657] ata1: hard resetting link [ 587.728906] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 587.735622] ata1.00: supports DRM functions and may not be fully accessible [ 587.744397] ata1.00: supports DRM functions and may not be fully accessible [ 587.752539] ata1.00: configured for UDMA/133 [ 587.756730] ata1: EH complete [ 587.759918] ata1.00: Enabling discard_zeroes_data [ 589.751271] elphel-ahci 80000000.elphel-ahci: removing Elphel AHCI driver [ 589.758068] ata1.00: disabled [ 589.763808] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 589.771170] sd 0:0:0:0: [sda] Synchronize Cache(10) failed: Result: hostbyte=0x04 driverbyte=0x00 [ 589.780050] sd 0:0:0:0: [sda] Stopping disk [ 589.784362] sd 0:0:0:0: [sda] Start/Stop Unit failed: Result: hostbyte=0x04 driverbyte=0x00 [ 862.005272] elphel-ahci 80000000.elphel-ahci: AHCI driver loading is deferred. Load bitstream and write 1 into /sys/devices/soc0/amba@0/80000000.elphel-ahci/load_module to continue [ 864.038894] elphel-ahci 80000000.elphel-ahci: probing Elphel AHCI driver [ 864.058897] elphel-ahci 80000000.elphel-ahci: AHCI 0001.0301 1 slots 1 ports 3 Gbps 0x1 impl platform mode [ 864.068471] elphel-ahci 80000000.elphel-ahci: flags: only sxs [ 864.077415] scsi host1: elphel-ahci [ 864.081236] ata2: SATA max UDMA/133 mmio [mem 0x80000000-0x80000fff] port 0x100 irq 163 [ 864.438887] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 864.445486] ata2.00: supports DRM functions and may not be fully accessible [ 864.452393] ata2.00: ATA-10: Crucial_CT250MX200SSD6, MU02, max UDMA/133 [ 864.458989] ata2.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 864.467280] ata2.00: supports DRM functions and may not be fully accessible [ 864.475512] ata2.00: configured for UDMA/133 [ 864.480095] scsi 1:0:0:0: Direct-Access ATA Crucial_CT250MX2 MU02 PQ: 0 ANSI: 5 [ 864.489163] ata2.00: Enabling discard_zeroes_data [ 864.493934] sd 1:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 864.501568] sd 1:0:0:0: [sda] 4096-byte physical blocks [ 864.502707] sd 1:0:0:0: Attached scsi generic sg0 type 0 [ 864.512394] sd 1:0:0:0: [sda] Write Protect is off [ 864.517144] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 864.517259] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 864.526809] ata2.00: Enabling discard_zeroes_data [ 864.532399] sda: sda1 sda2 [ 864.536057] ata2.00: Enabling discard_zeroes_data [ 864.541860] sd 1:0:0:0: [sda] Attached SCSI disk Met vriendelijke groet, With kind regards, Jorick Astrego THE IDIOT COMPANY Staalsteden 4-3A 7547 TA Enschede The Netherlands +31 (0)53 20 30 275 i...@theidiotcompany.eu WWW.THEIDIOTCOMPANY.EU
_______________________________________________ Support-list mailing list Support-list@support.elphel.com http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com